From: Benjamin Tissoires <benjamin.tissoires@redhat.com>
To: Dmitry Torokhov <dmitry.torokhov@gmail.com>,
Ping Cheng <pinglinux@gmail.com>,
Jason Gerecke <killertofu@gmail.com>
Cc: linux-input@vger.kernel.org, linux-kernel@vger.kernel.org,
linuxwacom-devel@lists.sourceforge.net
Subject: [PATCH 2/5] Input - wacom: split out the pad device for Intuos/Cintiq
Date: Mon, 23 Jun 2014 16:57:16 -0400 [thread overview]
Message-ID: <1403557039-1487-3-git-send-email-benjamin.tissoires@redhat.com> (raw)
In-Reply-To: <1403557039-1487-1-git-send-email-benjamin.tissoires@redhat.com>
MSC_SERIAL can be safely dropped for pad input devices.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
---
drivers/input/tablet/wacom_wac.c | 208 +++++++++++++++++++++++----------------
1 file changed, 122 insertions(+), 86 deletions(-)
diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index 4b16a34..8807ab5 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -584,6 +584,7 @@ static int wacom_intuos_irq(struct wacom_wac *wacom)
/* pad packets. Works as a second tool and is always in prox */
if (data[0] == WACOM_REPORT_INTUOSPAD || data[0] == WACOM_REPORT_INTUOS5PAD) {
+ input = wacom->pad_input;
if (features->type >= INTUOS4S && features->type <= INTUOS4L) {
input_report_key(input, BTN_0, (data[2] & 0x01));
input_report_key(input, BTN_1, (data[3] & 0x01));
@@ -773,7 +774,6 @@ static int wacom_intuos_irq(struct wacom_wac *wacom)
input_report_abs(input, ABS_MISC, 0);
}
}
- input_event(input, EV_MSC, MSC_SERIAL, 0xffffffff);
return 1;
}
@@ -1656,61 +1656,20 @@ int wacom_setup_input_capabilities(struct input_dev *input_dev,
break;
case WACOM_24HD:
- __set_bit(BTN_A, input_dev->keybit);
- __set_bit(BTN_B, input_dev->keybit);
- __set_bit(BTN_C, input_dev->keybit);
- __set_bit(BTN_X, input_dev->keybit);
- __set_bit(BTN_Y, input_dev->keybit);
- __set_bit(BTN_Z, input_dev->keybit);
-
- for (i = 6; i < 10; i++)
- __set_bit(BTN_0 + i, input_dev->keybit);
-
- __set_bit(KEY_PROG1, input_dev->keybit);
- __set_bit(KEY_PROG2, input_dev->keybit);
- __set_bit(KEY_PROG3, input_dev->keybit);
-
input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0);
input_set_abs_params(input_dev, ABS_THROTTLE, 0, 71, 0, 0);
/* fall through */
case DTK:
- for (i = 0; i < 6; i++)
- __set_bit(BTN_0 + i, input_dev->keybit);
-
__set_bit(INPUT_PROP_DIRECT, input_dev->propbit);
wacom_setup_cintiq(wacom_wac);
break;
case WACOM_22HD:
- __set_bit(KEY_PROG1, input_dev->keybit);
- __set_bit(KEY_PROG2, input_dev->keybit);
- __set_bit(KEY_PROG3, input_dev->keybit);
- /* fall through */
-
case WACOM_21UX2:
- __set_bit(BTN_A, input_dev->keybit);
- __set_bit(BTN_B, input_dev->keybit);
- __set_bit(BTN_C, input_dev->keybit);
- __set_bit(BTN_X, input_dev->keybit);
- __set_bit(BTN_Y, input_dev->keybit);
- __set_bit(BTN_Z, input_dev->keybit);
- __set_bit(BTN_BASE, input_dev->keybit);
- __set_bit(BTN_BASE2, input_dev->keybit);
- /* fall through */
-
case WACOM_BEE:
- __set_bit(BTN_8, input_dev->keybit);
- __set_bit(BTN_9, input_dev->keybit);
- /* fall through */
-
case CINTIQ:
- for (i = 0; i < 8; i++)
- __set_bit(BTN_0 + i, input_dev->keybit);
-
- input_set_abs_params(input_dev, ABS_RX, 0, 4096, 0, 0);
- input_set_abs_params(input_dev, ABS_RY, 0, 4096, 0, 0);
input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0);
__set_bit(INPUT_PROP_DIRECT, input_dev->propbit);
@@ -1719,9 +1678,6 @@ int wacom_setup_input_capabilities(struct input_dev *input_dev,
break;
case WACOM_13HD:
- for (i = 0; i < 9; i++)
- __set_bit(BTN_0 + i, input_dev->keybit);
-
input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0);
__set_bit(INPUT_PROP_DIRECT, input_dev->propbit);
wacom_setup_cintiq(wacom_wac);
@@ -1729,21 +1685,7 @@ int wacom_setup_input_capabilities(struct input_dev *input_dev,
case INTUOS3:
case INTUOS3L:
- __set_bit(BTN_4, input_dev->keybit);
- __set_bit(BTN_5, input_dev->keybit);
- __set_bit(BTN_6, input_dev->keybit);
- __set_bit(BTN_7, input_dev->keybit);
-
- input_set_abs_params(input_dev, ABS_RY, 0, 4096, 0, 0);
- /* fall through */
-
case INTUOS3S:
- __set_bit(BTN_0, input_dev->keybit);
- __set_bit(BTN_1, input_dev->keybit);
- __set_bit(BTN_2, input_dev->keybit);
- __set_bit(BTN_3, input_dev->keybit);
-
- input_set_abs_params(input_dev, ABS_RX, 0, 4096, 0, 0);
input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0);
/* fall through */
@@ -1757,20 +1699,11 @@ int wacom_setup_input_capabilities(struct input_dev *input_dev,
case INTUOS5L:
case INTUOSPM:
case INTUOSPL:
- if (features->device_type == BTN_TOOL_PEN) {
- __set_bit(BTN_7, input_dev->keybit);
- __set_bit(BTN_8, input_dev->keybit);
- }
- /* fall through */
-
case INTUOS5S:
case INTUOSPS:
__set_bit(INPUT_PROP_POINTER, input_dev->propbit);
if (features->device_type == BTN_TOOL_PEN) {
- for (i = 0; i < 7; i++)
- __set_bit(BTN_0 + i, input_dev->keybit);
-
input_set_abs_params(input_dev, ABS_DISTANCE, 0,
features->distance_max,
0, 0);
@@ -1791,14 +1724,7 @@ int wacom_setup_input_capabilities(struct input_dev *input_dev,
case INTUOS4:
case INTUOS4L:
- __set_bit(BTN_7, input_dev->keybit);
- __set_bit(BTN_8, input_dev->keybit);
- /* fall through */
-
case INTUOS4S:
- for (i = 0; i < 7; i++)
- __set_bit(BTN_0 + i, input_dev->keybit);
-
input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0);
wacom_setup_intuos(wacom_wac);
@@ -1922,17 +1848,6 @@ int wacom_setup_input_capabilities(struct input_dev *input_dev,
break;
case CINTIQ_HYBRID:
- __set_bit(BTN_1, input_dev->keybit);
- __set_bit(BTN_2, input_dev->keybit);
- __set_bit(BTN_3, input_dev->keybit);
- __set_bit(BTN_4, input_dev->keybit);
-
- __set_bit(BTN_5, input_dev->keybit);
- __set_bit(BTN_6, input_dev->keybit);
- __set_bit(BTN_7, input_dev->keybit);
- __set_bit(BTN_8, input_dev->keybit);
- __set_bit(BTN_0, input_dev->keybit);
-
input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0);
__set_bit(INPUT_PROP_DIRECT, input_dev->propbit);
@@ -1946,6 +1861,7 @@ int wacom_setup_pad_input_capabilities(struct input_dev *input_dev,
struct wacom_wac *wacom_wac)
{
struct wacom_features *features = &wacom_wac->features;
+ int i;
input_dev->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
@@ -1957,6 +1873,126 @@ int wacom_setup_pad_input_capabilities(struct input_dev *input_dev,
input_set_abs_params(input_dev, ABS_Y, 0, 1, 0, 0);
switch (features->type) {
+ case WACOM_24HD:
+ __set_bit(BTN_A, input_dev->keybit);
+ __set_bit(BTN_B, input_dev->keybit);
+ __set_bit(BTN_C, input_dev->keybit);
+ __set_bit(BTN_X, input_dev->keybit);
+ __set_bit(BTN_Y, input_dev->keybit);
+ __set_bit(BTN_Z, input_dev->keybit);
+
+ for (i = 0; i < 10; i++)
+ __set_bit(BTN_0 + i, input_dev->keybit);
+
+ __set_bit(KEY_PROG1, input_dev->keybit);
+ __set_bit(KEY_PROG2, input_dev->keybit);
+ __set_bit(KEY_PROG3, input_dev->keybit);
+
+ input_set_abs_params(input_dev, ABS_WHEEL, 0, 71, 0, 0);
+ input_set_abs_params(input_dev, ABS_THROTTLE, 0, 71, 0, 0);
+ break;
+
+ case DTK:
+ for (i = 0; i < 6; i++)
+ __set_bit(BTN_0 + i, input_dev->keybit);
+
+ break;
+
+ case WACOM_22HD:
+ __set_bit(KEY_PROG1, input_dev->keybit);
+ __set_bit(KEY_PROG2, input_dev->keybit);
+ __set_bit(KEY_PROG3, input_dev->keybit);
+ /* fall through */
+
+ case WACOM_21UX2:
+ __set_bit(BTN_A, input_dev->keybit);
+ __set_bit(BTN_B, input_dev->keybit);
+ __set_bit(BTN_C, input_dev->keybit);
+ __set_bit(BTN_X, input_dev->keybit);
+ __set_bit(BTN_Y, input_dev->keybit);
+ __set_bit(BTN_Z, input_dev->keybit);
+ __set_bit(BTN_BASE, input_dev->keybit);
+ __set_bit(BTN_BASE2, input_dev->keybit);
+ /* fall through */
+
+ case WACOM_BEE:
+ __set_bit(BTN_8, input_dev->keybit);
+ __set_bit(BTN_9, input_dev->keybit);
+ /* fall through */
+
+ case CINTIQ:
+ for (i = 0; i < 8; i++)
+ __set_bit(BTN_0 + i, input_dev->keybit);
+
+ input_set_abs_params(input_dev, ABS_RX, 0, 4096, 0, 0);
+ input_set_abs_params(input_dev, ABS_RY, 0, 4096, 0, 0);
+ break;
+
+ case WACOM_13HD:
+ for (i = 0; i < 9; i++)
+ __set_bit(BTN_0 + i, input_dev->keybit);
+
+ input_set_abs_params(input_dev, ABS_WHEEL, 0, 71, 0, 0);
+ break;
+
+ case INTUOS3:
+ case INTUOS3L:
+ __set_bit(BTN_4, input_dev->keybit);
+ __set_bit(BTN_5, input_dev->keybit);
+ __set_bit(BTN_6, input_dev->keybit);
+ __set_bit(BTN_7, input_dev->keybit);
+
+ input_set_abs_params(input_dev, ABS_RY, 0, 4096, 0, 0);
+ /* fall through */
+
+ case INTUOS3S:
+ __set_bit(BTN_0, input_dev->keybit);
+ __set_bit(BTN_1, input_dev->keybit);
+ __set_bit(BTN_2, input_dev->keybit);
+ __set_bit(BTN_3, input_dev->keybit);
+
+ input_set_abs_params(input_dev, ABS_RX, 0, 4096, 0, 0);
+ break;
+
+ case INTUOS5:
+ case INTUOS5L:
+ case INTUOSPM:
+ case INTUOSPL:
+ __set_bit(BTN_7, input_dev->keybit);
+ __set_bit(BTN_8, input_dev->keybit);
+ /* fall through */
+
+ case INTUOS5S:
+ case INTUOSPS:
+ /* touch interface does not have the pad device */
+ if (features->device_type != BTN_TOOL_PEN)
+ return 1;
+
+ for (i = 0; i < 7; i++)
+ __set_bit(BTN_0 + i, input_dev->keybit);
+
+ input_set_abs_params(input_dev, ABS_WHEEL, 0, 71, 0, 0);
+ break;
+
+ case INTUOS4:
+ case INTUOS4L:
+ __set_bit(BTN_7, input_dev->keybit);
+ __set_bit(BTN_8, input_dev->keybit);
+ /* fall through */
+
+ case INTUOS4S:
+ for (i = 0; i < 7; i++)
+ __set_bit(BTN_0 + i, input_dev->keybit);
+
+ input_set_abs_params(input_dev, ABS_WHEEL, 0, 71, 0, 0);
+ break;
+
+ case CINTIQ_HYBRID:
+ for (i = 0; i < 9; i++)
+ __set_bit(BTN_0 + i, input_dev->keybit);
+
+ break;
+
default:
/* no pad supported */
return 1;
--
1.9.0
next prev parent reply other threads:[~2014-06-23 20:57 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-23 20:57 [PATCH 0/5] Input - wacom: split out pad data from the stylus input device Benjamin Tissoires
2014-06-23 20:57 ` [PATCH 1/5] Input - wacom: create a separate input device for pads Benjamin Tissoires
2014-06-24 0:18 ` Ping Cheng
2014-06-24 14:00 ` Benjamin Tissoires
2014-07-11 0:18 ` Jason Gerecke
2014-07-11 13:17 ` [Linuxwacom-devel] " Benjamin Tissoires
2014-06-23 20:57 ` Benjamin Tissoires [this message]
2014-06-23 20:57 ` [PATCH 3/5] Input - wacom: split out the pad device for Bamboos Benjamin Tissoires
2014-06-23 20:57 ` [PATCH 4/5] Input - wacom: split out the pad device for DTUS Benjamin Tissoires
2014-06-23 20:57 ` [PATCH 5/5] Input - wacom: split out the pad device for Graphire G4 and MO Benjamin Tissoires
2014-07-11 1:21 ` [PATCH 0/5] Input - wacom: split out pad data from the stylus input device Jason Gerecke
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1403557039-1487-3-git-send-email-benjamin.tissoires@redhat.com \
--to=benjamin.tissoires@redhat.com \
--cc=dmitry.torokhov@gmail.com \
--cc=killertofu@gmail.com \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxwacom-devel@lists.sourceforge.net \
--cc=pinglinux@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).