From: Benjamin Tissoires <benjamin.tissoires@redhat.com>
To: Dmitry Torokhov <dmitry.torokhov@gmail.com>,
Ping Cheng <pinglinux@gmail.com>,
Jason Gerecke <killertofu@gmail.com>
Cc: linux-input@vger.kernel.org, linux-kernel@vger.kernel.org,
linuxwacom-devel@lists.sourceforge.net
Subject: [PATCH 3/5] Input - wacom: split out the pad device for Bamboos
Date: Mon, 23 Jun 2014 16:57:17 -0400 [thread overview]
Message-ID: <1403557039-1487-4-git-send-email-benjamin.tissoires@redhat.com> (raw)
In-Reply-To: <1403557039-1487-1-git-send-email-benjamin.tissoires@redhat.com>
We rely on the return code of wacom_bpt*() to do the input_sync().
wacom_wac_irq() then properly sync the input devices.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
---
drivers/input/tablet/wacom_wac.c | 39 +++++++++++++++++++++++----------------
1 file changed, 23 insertions(+), 16 deletions(-)
diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index 8807ab5..5aaa3d2 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -1143,6 +1143,7 @@ static int wacom_bpt_touch(struct wacom_wac *wacom)
{
struct wacom_features *features = &wacom->features;
struct input_dev *input = wacom->input;
+ struct input_dev *pad_input = wacom->pad_input;
unsigned char *data = wacom->data;
int i;
@@ -1177,14 +1178,12 @@ static int wacom_bpt_touch(struct wacom_wac *wacom)
input_mt_report_pointer_emulation(input, true);
- input_report_key(input, BTN_LEFT, (data[1] & 0x08) != 0);
- input_report_key(input, BTN_FORWARD, (data[1] & 0x04) != 0);
- input_report_key(input, BTN_BACK, (data[1] & 0x02) != 0);
- input_report_key(input, BTN_RIGHT, (data[1] & 0x01) != 0);
-
- input_sync(input);
+ input_report_key(pad_input, BTN_LEFT, (data[1] & 0x08) != 0);
+ input_report_key(pad_input, BTN_FORWARD, (data[1] & 0x04) != 0);
+ input_report_key(pad_input, BTN_BACK, (data[1] & 0x02) != 0);
+ input_report_key(pad_input, BTN_RIGHT, (data[1] & 0x01) != 0);
- return 0;
+ return 1;
}
static void wacom_bpt3_touch_msg(struct wacom_wac *wacom, unsigned char *data)
@@ -1232,7 +1231,7 @@ static void wacom_bpt3_touch_msg(struct wacom_wac *wacom, unsigned char *data)
static void wacom_bpt3_button_msg(struct wacom_wac *wacom, unsigned char *data)
{
- struct input_dev *input = wacom->input;
+ struct input_dev *input = wacom->pad_input;
struct wacom_features *features = &wacom->features;
if (features->type == INTUOSHT) {
@@ -1269,9 +1268,7 @@ static int wacom_bpt3_touch(struct wacom_wac *wacom)
}
input_mt_report_pointer_emulation(input, true);
- input_sync(input);
-
- return 0;
+ return 1;
}
static int wacom_bpt_pen(struct wacom_wac *wacom)
@@ -1806,11 +1803,6 @@ int wacom_setup_input_capabilities(struct input_dev *input_dev,
if (features->device_type == BTN_TOOL_FINGER) {
- __set_bit(BTN_LEFT, input_dev->keybit);
- __set_bit(BTN_FORWARD, input_dev->keybit);
- __set_bit(BTN_BACK, input_dev->keybit);
- __set_bit(BTN_RIGHT, input_dev->keybit);
-
if (features->touch_max) {
/* touch interface */
unsigned int flags = INPUT_MT_POINTER;
@@ -1993,6 +1985,21 @@ int wacom_setup_pad_input_capabilities(struct input_dev *input_dev,
break;
+ case INTUOSHT:
+ case BAMBOO_PT:
+ /* pad device is on the touch interface */
+ if (features->device_type != BTN_TOOL_FINGER)
+ return 1;
+
+ __clear_bit(ABS_MISC, input_dev->absbit);
+
+ __set_bit(BTN_LEFT, input_dev->keybit);
+ __set_bit(BTN_FORWARD, input_dev->keybit);
+ __set_bit(BTN_BACK, input_dev->keybit);
+ __set_bit(BTN_RIGHT, input_dev->keybit);
+
+ break;
+
default:
/* no pad supported */
return 1;
--
1.9.0
next prev parent reply other threads:[~2014-06-23 20:57 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-23 20:57 [PATCH 0/5] Input - wacom: split out pad data from the stylus input device Benjamin Tissoires
2014-06-23 20:57 ` [PATCH 1/5] Input - wacom: create a separate input device for pads Benjamin Tissoires
2014-06-24 0:18 ` Ping Cheng
2014-06-24 14:00 ` Benjamin Tissoires
2014-07-11 0:18 ` Jason Gerecke
2014-07-11 13:17 ` [Linuxwacom-devel] " Benjamin Tissoires
2014-06-23 20:57 ` [PATCH 2/5] Input - wacom: split out the pad device for Intuos/Cintiq Benjamin Tissoires
2014-06-23 20:57 ` Benjamin Tissoires [this message]
2014-06-23 20:57 ` [PATCH 4/5] Input - wacom: split out the pad device for DTUS Benjamin Tissoires
2014-06-23 20:57 ` [PATCH 5/5] Input - wacom: split out the pad device for Graphire G4 and MO Benjamin Tissoires
2014-07-11 1:21 ` [PATCH 0/5] Input - wacom: split out pad data from the stylus input device Jason Gerecke
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1403557039-1487-4-git-send-email-benjamin.tissoires@redhat.com \
--to=benjamin.tissoires@redhat.com \
--cc=dmitry.torokhov@gmail.com \
--cc=killertofu@gmail.com \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxwacom-devel@lists.sourceforge.net \
--cc=pinglinux@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).