From: Johan Hovold <johan@kernel.org>
To: Bryan Wu <cooloney@gmail.com>, Richard Purdie <rpurdie@rpsys.net>
Cc: "Dmitry Torokhov" <dmitry.torokhov@gmail.com>,
"Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
linux-input@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-leds@vger.kernel.org,
"Janne Kanniainen" <janne.kanniainen@gmail.com>,
"Jiri Kosina" <jkosina@suse.cz>, "Bjørn Mork" <bjorn@mork.no>,
"Johan Hovold" <johan@kernel.org>
Subject: [PATCH 05/13] leds: lm3642: fix attribute-creation race
Date: Wed, 25 Jun 2014 19:08:48 +0200 [thread overview]
Message-ID: <1403716136-32694-6-git-send-email-johan@kernel.org> (raw)
In-Reply-To: <1403716136-32694-1-git-send-email-johan@kernel.org>
Use the attribute groups of the led-class to create the flash and
torch-LED attributes during probe in order to avoid racing with
userspace.
Signed-off-by: Johan Hovold <johan@kernel.org>
---
drivers/leds/leds-lm3642.c | 30 ++++++++++++++----------------
1 file changed, 14 insertions(+), 16 deletions(-)
diff --git a/drivers/leds/leds-lm3642.c b/drivers/leds/leds-lm3642.c
index ceb6b3cde6fe..d3dec0132769 100644
--- a/drivers/leds/leds-lm3642.c
+++ b/drivers/leds/leds-lm3642.c
@@ -313,6 +313,18 @@ static const struct regmap_config lm3642_regmap = {
.max_register = REG_MAX,
};
+static struct attribute *lm3642_flash_attrs[] = {
+ &dev_attr_strobe_pin.attr,
+ NULL
+};
+ATTRIBUTE_GROUPS(lm3642_flash);
+
+static struct attribute *lm3642_torch_attrs[] = {
+ &dev_attr_torch_pin.attr,
+ NULL
+};
+ATTRIBUTE_GROUPS(lm3642_torch);
+
static int lm3642_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
@@ -364,17 +376,13 @@ static int lm3642_probe(struct i2c_client *client,
chip->cdev_flash.max_brightness = 16;
chip->cdev_flash.brightness_set = lm3642_strobe_brightness_set;
chip->cdev_flash.default_trigger = "flash";
+ chip->cdev_flash.groups = lm3642_flash_groups,
err = led_classdev_register((struct device *)
&client->dev, &chip->cdev_flash);
if (err < 0) {
dev_err(chip->dev, "failed to register flash\n");
goto err_out;
}
- err = device_create_file(chip->cdev_flash.dev, &dev_attr_strobe_pin);
- if (err < 0) {
- dev_err(chip->dev, "failed to create strobe-pin file\n");
- goto err_create_flash_pin_file;
- }
/* torch */
INIT_WORK(&chip->work_torch, lm3642_deferred_torch_brightness_set);
@@ -382,17 +390,13 @@ static int lm3642_probe(struct i2c_client *client,
chip->cdev_torch.max_brightness = 8;
chip->cdev_torch.brightness_set = lm3642_torch_brightness_set;
chip->cdev_torch.default_trigger = "torch";
+ chip->cdev_torch.groups = lm3642_torch_groups,
err = led_classdev_register((struct device *)
&client->dev, &chip->cdev_torch);
if (err < 0) {
dev_err(chip->dev, "failed to register torch\n");
goto err_create_torch_file;
}
- err = device_create_file(chip->cdev_torch.dev, &dev_attr_torch_pin);
- if (err < 0) {
- dev_err(chip->dev, "failed to create torch-pin file\n");
- goto err_create_torch_pin_file;
- }
/* indicator */
INIT_WORK(&chip->work_indicator,
@@ -411,12 +415,8 @@ static int lm3642_probe(struct i2c_client *client,
return 0;
err_create_indicator_file:
- device_remove_file(chip->cdev_torch.dev, &dev_attr_torch_pin);
-err_create_torch_pin_file:
led_classdev_unregister(&chip->cdev_torch);
err_create_torch_file:
- device_remove_file(chip->cdev_flash.dev, &dev_attr_strobe_pin);
-err_create_flash_pin_file:
led_classdev_unregister(&chip->cdev_flash);
err_out:
return err;
@@ -428,10 +428,8 @@ static int lm3642_remove(struct i2c_client *client)
led_classdev_unregister(&chip->cdev_indicator);
flush_work(&chip->work_indicator);
- device_remove_file(chip->cdev_torch.dev, &dev_attr_torch_pin);
led_classdev_unregister(&chip->cdev_torch);
flush_work(&chip->work_torch);
- device_remove_file(chip->cdev_flash.dev, &dev_attr_strobe_pin);
led_classdev_unregister(&chip->cdev_flash);
flush_work(&chip->work_flash);
regmap_write(chip->regmap, REG_ENABLE, 0);
--
1.8.5.5
next prev parent reply other threads:[~2014-06-25 17:08 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-25 17:08 [PATCH 00/13] leds: fix attribute-creation races Johan Hovold
2014-06-25 17:08 ` [PATCH 01/13] leds: add led-class attribute-group support Johan Hovold
2014-06-25 17:08 ` [PATCH 02/13] leds: lm3550: fix attribute-creation race Johan Hovold
2014-06-25 17:08 ` [PATCH 03/13] leds: lm3533: " Johan Hovold
2014-06-25 17:08 ` [PATCH 04/13] leds: lm355x: " Johan Hovold
2014-06-25 17:08 ` Johan Hovold [this message]
2014-06-25 17:08 ` [PATCH 06/13] leds: max8997: " Johan Hovold
2014-06-25 17:08 ` [PATCH 07/13] leds: netxbig: " Johan Hovold
2014-06-25 22:30 ` Bryan Wu
2014-06-25 17:08 ` [PATCH 08/13] leds: ns2: " Johan Hovold
2014-06-25 17:08 ` [PATCH 09/13] leds: ss4200: " Johan Hovold
2014-06-25 17:08 ` [PATCH 10/13] leds: wm831x-status: " Johan Hovold
2014-06-25 17:08 ` [PATCH 11/13] input: lm8323: " Johan Hovold
2014-06-25 22:45 ` Bryan Wu
2014-06-27 18:50 ` Dmitry Torokhov
2014-06-30 23:06 ` Bryan Wu
2014-06-25 17:08 ` [PATCH 12/13] leds: lp55xx-common: fix sysfs entry leak Johan Hovold
2014-06-25 17:08 ` [PATCH 13/13] leds: lp55xx-common: fix attribute-creation race Johan Hovold
2014-06-25 22:46 ` [PATCH 00/13] leds: fix attribute-creation races Bryan Wu
2014-06-26 23:25 ` Greg Kroah-Hartman
2014-06-27 10:05 ` Jiri Kosina
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1403716136-32694-6-git-send-email-johan@kernel.org \
--to=johan@kernel.org \
--cc=bjorn@mork.no \
--cc=cooloney@gmail.com \
--cc=dmitry.torokhov@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=janne.kanniainen@gmail.com \
--cc=jkosina@suse.cz \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=rpurdie@rpsys.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).