From mboxrd@z Thu Jan 1 00:00:00 1970 From: Dan Murphy Subject: [PATCH v2] doc: dt/bindings: input: Fix drv260x binding document Date: Fri, 22 Aug 2014 12:12:19 -0500 Message-ID: <1408727539-15996-1-git-send-email-dmurphy@ti.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: Received: from arroyo.ext.ti.com ([192.94.94.40]:52526 "EHLO arroyo.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932297AbaHVRMs (ORCPT ); Fri, 22 Aug 2014 13:12:48 -0400 Sender: linux-input-owner@vger.kernel.org List-Id: linux-input@vger.kernel.org To: devicetree@vger.kernel.org, linux-input@vger.kernel.org Cc: linux-kernel@vger.kernel.org, dmitry.torokhov@gmail.com, linux-arm-kernel@lists.infradead.org, Dan Murphy Update the drv260x dt binding document: - Change the node name to the devices function not the device name. - Add vbat-supply to the example. - Fix indentation of the example. Signed-off-by: Dan Murphy --- v2 - Address comments on indentation, node declaration, add vbat-supply, removed description as it did not make sense - https://patchwork.kernel.org/patch/4765141/ .../devicetree/bindings/input/ti,drv260x.txt | 23 ++++++++++---------- 1 file changed, 11 insertions(+), 12 deletions(-) diff --git a/Documentation/devicetree/bindings/input/ti,drv260x.txt b/Documentation/devicetree/bindings/input/ti,drv260x.txt index a9c8519..ee09c8f 100644 --- a/Documentation/devicetree/bindings/input/ti,drv260x.txt +++ b/Documentation/devicetree/bindings/input/ti,drv260x.txt @@ -1,6 +1,4 @@ -Texas Instruments - drv260x Haptics driver family - -The drv260x family serial control bus communicates through I2C protocols +* Texas Instruments - drv260x Haptics driver family Required properties: - compatible - One of: @@ -37,15 +35,16 @@ Optional properties: 3.2 v. Example: -drv2605l: drv2605l@5a { - compatible = "ti,drv2605l"; - reg = <0x5a>; - enable-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>; - mode = ; - library-sel = ; - vib-rated-mv = <3200>; - vib-overdriver-mv = <3200>; -}; +haptics: haptics@5a { + compatible = "ti,drv2605l"; + reg = <0x5a>; + vbat-supply = <&vbat>; + enable-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>; + mode = ; + library-sel = ; + vib-rated-mv = <3200>; + vib-overdriver-mv = <3200>; +} For more product information please see the link below: http://www.ti.com/product/drv2605 -- 1.7.9.5