From: Christian Gmeiner <christian.gmeiner@gmail.com>
To: linux-input@vger.kernel.org
Cc: benjamin.tissoires@gmail.com, jkosina@suse.cz,
Christian Gmeiner <christian.gmeiner@gmail.com>
Subject: [PATCH] HID: add support for PenMount HID TouchScreen Driver v4
Date: Wed, 3 Sep 2014 10:33:53 +0200 [thread overview]
Message-ID: <1409733233-11533-1-git-send-email-christian.gmeiner@gmail.com> (raw)
This patch adds a seperate hid-penmount driver to work
around an issue with the HID report descriptor. The
descriptor does not contain the ContactID usage and as
result the touchscreen is represented as normal mouse
to the system.
This driver maps the button 0 emitted by the touchscreen
to BTN_TOUCH. This makes it possible to use touch events
in userspace.
changes from v1 to v2
- incorporated feedback from Benjamin Tissoires
changes from v2 to v3
- add missing hid-core.c and hid-ids.h changes
changes from v3 to v4
- incorporated feedback from Benjamin Tissoires
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
---
drivers/hid/Kconfig | 6 ++++++
drivers/hid/Makefile | 1 +
drivers/hid/hid-core.c | 1 +
drivers/hid/hid-ids.h | 1 +
drivers/hid/hid-penmount.c | 49 ++++++++++++++++++++++++++++++++++++++++++++++
5 files changed, 58 insertions(+)
create mode 100644 drivers/hid/hid-penmount.c
diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index c18d5d7..0351b66 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -530,6 +530,17 @@ config PANTHERLORD_FF
Say Y here if you have a PantherLord/GreenAsia based game controller
or adapter and want to enable force feedback support for it.
+config HID_PENMOUNT
+ tristate "Penmount touch device"
+ depends on USB_HID
+ ---help---
+ This selects a driver for the PenMount 6000 touch controller.
+
+ The driver works around a problem in the report descript allowing
+ the userspace to touch events instead of mouse events.
+
+ Say Y here if you have a Penmount based touch controller.
+
config HID_PETALYNX
tristate "Petalynx Maxter remote control"
depends on HID
diff --git a/drivers/hid/Makefile b/drivers/hid/Makefile
index 4dbac7f..e2850d8 100644
--- a/drivers/hid/Makefile
+++ b/drivers/hid/Makefile
@@ -71,6 +71,7 @@ obj-$(CONFIG_HID_NTRIG) += hid-ntrig.o
obj-$(CONFIG_HID_ORTEK) += hid-ortek.o
obj-$(CONFIG_HID_PRODIKEYS) += hid-prodikeys.o
obj-$(CONFIG_HID_PANTHERLORD) += hid-pl.o
+obj-$(CONFIG_HID_PENMOUNT) += hid-penmount.o
obj-$(CONFIG_HID_PETALYNX) += hid-petalynx.o
obj-$(CONFIG_HID_PICOLCD) += hid-picolcd.o
hid-picolcd-y += hid-picolcd_core.o
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index 12b6e67..6827196 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1880,6 +1880,7 @@ static const struct hid_device_id hid_have_special_driver[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_18) },
{ HID_USB_DEVICE(USB_VENDOR_ID_ORTEK, USB_DEVICE_ID_ORTEK_PKB1700) },
{ HID_USB_DEVICE(USB_VENDOR_ID_ORTEK, USB_DEVICE_ID_ORTEK_WKB2000) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_PENMOUNT, USB_DEVICE_ID_PENMOUNT_6000) },
{ HID_USB_DEVICE(USB_VENDOR_ID_PETALYNX, USB_DEVICE_ID_PETALYNX_MAXTER_REMOTE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_PRIMAX, USB_DEVICE_ID_PRIMAX_KEYBOARD) },
#if IS_ENABLED(CONFIG_HID_ROCCAT)
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 25cd674..3943ffe 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -722,6 +722,7 @@
#define USB_DEVICE_ID_PENMOUNT_PCI 0x3500
#define USB_DEVICE_ID_PENMOUNT_1610 0x1610
#define USB_DEVICE_ID_PENMOUNT_1640 0x1640
+#define USB_DEVICE_ID_PENMOUNT_6000 0x6000
#define USB_VENDOR_ID_PETALYNX 0x18b1
#define USB_DEVICE_ID_PETALYNX_MAXTER_REMOTE 0x0037
diff --git a/drivers/hid/hid-penmount.c b/drivers/hid/hid-penmount.c
new file mode 100644
index 0000000..c11dce8
--- /dev/null
+++ b/drivers/hid/hid-penmount.c
@@ -0,0 +1,49 @@
+/*
+ * HID driver for PenMount touchscreens
+ *
+ * Copyright (c) 2014 Christian Gmeiner <christian.gmeiner <at> gmail.com>
+ *
+ * based on hid-penmount copyrighted by
+ * PenMount Touch Solutions <penmount <at> seed.net.tw>
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/hid.h>
+#include "hid-ids.h"
+
+static int penmount_input_mapping(struct hid_device *hdev,
+ struct hid_input *hi, struct hid_field *field,
+ struct hid_usage *usage, unsigned long **bit, int *max)
+{
+ if ((usage->hid & HID_USAGE_PAGE) == HID_UP_BUTTON) {
+ hid_map_usage(hi, usage, bit, max, EV_KEY, BTN_TOUCH);
+ return 1;
+ }
+
+ return 0;
+}
+
+static const struct hid_device_id penmount_devices[] = {
+ { HID_USB_DEVICE(USB_VENDOR_ID_PENMOUNT, USB_DEVICE_ID_PENMOUNT_6000) },
+ { }
+};
+MODULE_DEVICE_TABLE(hid, penmount_devices);
+
+static struct hid_driver penmount_driver = {
+ .name = "hid-penmount",
+ .id_table = penmount_devices,
+ .input_mapping = penmount_input_mapping,
+};
+
+module_hid_driver(penmount_driver);
+
+MODULE_AUTHOR("Christian Gmeiner <christian.gmeiner@gmail.com>");
+MODULE_DESCRIPTION("PenMount HID TouchScreen driver");
+MODULE_LICENSE("GPL");
--
1.9.3
reply other threads:[~2014-09-03 8:34 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1409733233-11533-1-git-send-email-christian.gmeiner@gmail.com \
--to=christian.gmeiner@gmail.com \
--cc=benjamin.tissoires@gmail.com \
--cc=jkosina@suse.cz \
--cc=linux-input@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).