[PATCH] HID: wacom: make the WL connection friendly for the desktop

[Benjamin Tissoires <benjamin.tissoires@redhat.com>]

Currently, tablets connected to the WL receiver all share the same
VID/PID. There is no way for the user space to know which one is which
besides parsing the name. We can force the PID to be set to the
actual hardware. This way, the input device will have the correct PID
which can be match in libwacom.

With only this trick, the pad input does not inherit the ID_INPUT_TABLET
udev property from its parent. We can force udev to accept it by declaring
a BTN_STYLUS which is never used.

This way, tablets connected through WL can be used from the user point of
view in the same way they are used while connected through wire.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
---

Hi guys,

to continue on Ping's work regarding the Wireless reciever, here is a patch
which allows to have the same user experience regardless the transport layer.
Unfortunately, a libwacom patch is also required, but once both are applied,
there is no differences between the wired and wireless connections. Yeah!

Cheers,
Benjamin

 drivers/hid/wacom_sys.c | 2 +-
 drivers/hid/wacom_wac.c | 3 +++
 2 files changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/hid/wacom_sys.c b/drivers/hid/wacom_sys.c
index 9e4e188..a8b7f16 100644
--- a/drivers/hid/wacom_sys.c
+++ b/drivers/hid/wacom_sys.c
@@ -1035,7 +1035,7 @@ static struct input_dev *wacom_allocate_input(struct wacom *wacom)
 	input_dev->uniq = hdev->uniq;
 	input_dev->id.bustype = hdev->bus;
 	input_dev->id.vendor  = hdev->vendor;
-	input_dev->id.product = hdev->product;
+	input_dev->id.product = wacom_wac->pid ? wacom_wac->pid : hdev->product;
 	input_dev->id.version = hdev->version;
 	input_set_drvdata(input_dev, wacom);
 
diff --git a/drivers/hid/wacom_wac.c b/drivers/hid/wacom_wac.c
index c3cbbfb..b8180e4 100644
--- a/drivers/hid/wacom_wac.c
+++ b/drivers/hid/wacom_wac.c
@@ -1990,6 +1990,9 @@ int wacom_setup_pad_input_capabilities(struct input_dev *input_dev,
 	input_set_abs_params(input_dev, ABS_X, 0, 1, 0, 0);
 	input_set_abs_params(input_dev, ABS_Y, 0, 1, 0, 0);
 
+	/* kept for making udev and libwacom accepting the pad */
+	__set_bit(BTN_STYLUS, input_dev->keybit);
+
 	switch (features->type) {
 	case GRAPHIRE_BT:
 		__set_bit(BTN_0, input_dev->keybit);
-- 
2.1.0