[PATCH 1/2] HID: wacom: Report ABS_TILT_{X,Y} as signed values

[Jason Gerecke <killertofu@gmail.com>]

Centers the ABS_TILT_{X,Y} axes so that a value of zero is reported when
the pen is vertical. Combined with resolution information in the next
patch, this makes it possible for userspace to calculate the pen angle
without needing hardware-specific knowledge. The xf86-input-wacom driver
was updated to support signed tilt values in late-2012 (2f2acec).

Signed-off-by: Jason Gerecke <killertofu@gmail.com>
---
 drivers/hid/wacom_wac.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/hid/wacom_wac.c b/drivers/hid/wacom_wac.c
index 8a83da9..525b648 100644
--- a/drivers/hid/wacom_wac.c
+++ b/drivers/hid/wacom_wac.c
@@ -600,8 +600,8 @@ static void wacom_intuos_general(struct wacom_wac *wacom)
 		}
 		input_report_abs(input, ABS_PRESSURE, t);
 		input_report_abs(input, ABS_TILT_X,
-				((data[7] << 1) & 0x7e) | (data[8] >> 7));
-		input_report_abs(input, ABS_TILT_Y, data[8] & 0x7f);
+				 (((data[7] << 1) & 0x7e) | (data[8] >> 7)) - 64);
+		input_report_abs(input, ABS_TILT_Y, (data[8] & 0x7f) - 64);
 		input_report_key(input, BTN_STYLUS, data[1] & 2);
 		input_report_key(input, BTN_STYLUS2, data[1] & 4);
 		input_report_key(input, BTN_TOUCH, t > 10);
@@ -612,8 +612,8 @@ static void wacom_intuos_general(struct wacom_wac *wacom)
 		input_report_abs(input, ABS_WHEEL,
 				(data[6] << 2) | ((data[7] >> 6) & 3));
 		input_report_abs(input, ABS_TILT_X,
-				((data[7] << 1) & 0x7e) | (data[8] >> 7));
-		input_report_abs(input, ABS_TILT_Y, data[8] & 0x7f);
+				 (((data[7] << 1) & 0x7e) | (data[8] >> 7)) - 64);
+		input_report_abs(input, ABS_TILT_Y, (data[8] & 0x7f) - 64);
 	}
 }
 
@@ -915,8 +915,8 @@ static int wacom_intuos_irq(struct wacom_wac *wacom)
 				input_report_key(input, BTN_EXTRA,  data[6] & 0x10);
 
 				input_report_abs(input, ABS_TILT_X,
-					((data[7] << 1) & 0x7e) | (data[8] >> 7));
-				input_report_abs(input, ABS_TILT_Y, data[8] & 0x7f);
+					(((data[7] << 1) & 0x7e) | (data[8] >> 7)) - 64);
+				input_report_abs(input, ABS_TILT_Y, (data[8] & 0x7f) - 64);
 			} else {
 				/* 2D mouse packet */
 				input_report_key(input, BTN_LEFT,   data[8] & 0x04);
@@ -1926,8 +1926,8 @@ static void wacom_setup_cintiq(struct wacom_wac *wacom_wac)
 	input_set_abs_params(input_dev, ABS_DISTANCE,
 			     0, wacom_wac->features.distance_max, 0, 0);
 	input_set_abs_params(input_dev, ABS_WHEEL, 0, 1023, 0, 0);
-	input_set_abs_params(input_dev, ABS_TILT_X, 0, 127, 0, 0);
-	input_set_abs_params(input_dev, ABS_TILT_Y, 0, 127, 0, 0);
+	input_set_abs_params(input_dev, ABS_TILT_X, -64, 63, 0, 0);
+	input_set_abs_params(input_dev, ABS_TILT_Y, -64, 63, 0, 0);
 }
 
 static void wacom_setup_intuos(struct wacom_wac *wacom_wac)
-- 
2.1.3