From: vishnupatekar <vishnupatekar0510-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org,
dmitry.torokhov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org,
linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org
Cc: leafy.myeh-Q9AEpCAkrSgqDJ6do+/SaQ@public.gmane.org,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
pawel.moll-5wv7dgnIgG8@public.gmane.org,
mark.rutland-5wv7dgnIgG8@public.gmane.org,
ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org,
galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-input-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
vishnupatekar
<VishnuPatekar0510-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Subject: [PATCHv2 3/3] ARM:dts:sunxi:ps2 dt nodes for A10/A20 PS2 controller.
Date: Sun, 7 Dec 2014 04:45:19 +0530 [thread overview]
Message-ID: <1417907719-26775-4-git-send-email-VishnuPatekar0510@gmail.com> (raw)
In-Reply-To: <1417907719-26775-1-git-send-email-VishnuPatekar0510-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Added ps2 nodes in lime2 board dts. By default ps20 and ps21 nodes are
commented as ps20 pins conflict with HDMI connector
on Lime2 Board.
Signed-off-by: vishnupatekar <VishnuPatekar0510-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
arch/arm/boot/dts/sun4i-a10.dtsi | 27 +++++++++++++++++++++
arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts | 13 ++++++++++
arch/arm/boot/dts/sun7i-a20.dtsi | 29 +++++++++++++++++++++++
3 files changed, 69 insertions(+)
diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
index 5e2ec2d..4726e8d 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -615,6 +615,19 @@
allwinner,drive = <0>;
allwinner,pull = <0>;
};
+ ps2_0_pins: ps2_0@0 {
+ allwinner,pins = "PI20","PI21";
+ allwinner,function = "ps2";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+ ps2_1_pins: ps2_1@0 {
+ allwinner,pins = "PH12","PH13";
+ allwinner,function = "ps2";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+
};
timer@01c20c00 {
@@ -781,5 +794,19 @@
#address-cells = <1>;
#size-cells = <0>;
};
+ ps20: ps2@0x01c2a000 {
+ compatible = "allwinner,sun4i-a10-ps2";
+ reg = <0x01c2a000 0x400>;
+ interrupts = <0 62 4>;
+ clocks = <&apb1_gates 6>;
+ status = "disabled";
+ };
+ ps21: ps2@0x01c2a400 {
+ compatible = "allwinner,sun4i-a10-ps2";
+ reg = <0x01c2a400 0x400>;
+ interrupts = <0 63 4>;
+ clocks = <&apb1_gates 7>;
+ status = "disabled";
+ };
};
};
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
index ed364d5..5624e63 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
@@ -112,6 +112,19 @@
pinctrl-0 = <&uart0_pins_a>;
status = "okay";
};
+ /* PS2 0 and PS2 1 are disabled by default
+ To enable PS2 0 and PS2 1 uncomment below ps20 and ps21 nodes
+ Please note that ps20 pins conflict with HDMI on Lime2 Board*/
+ /*ps20: ps2@0x01c2a000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ps2_0_pins>;
+ status = "okay";
+ };
+ ps21: ps2@0x01c2a400 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ps2_1_pins>;
+ status = "okay";
+ };*/
i2c0: i2c@01c2ac00 {
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index 8605f2b..96fe37d 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -852,6 +852,19 @@
allwinner,drive = <0>;
allwinner,pull = <0>;
};
+ ps2_0_pins: ps2_0@0 {
+ allwinner,pins = "PI20","PI21";
+ allwinner,function = "ps2";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+ ps2_1_pins: ps2_1@0 {
+ allwinner,pins = "PH12","PH13";
+ allwinner,function = "ps2";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+
};
timer@01c20c00 {
@@ -1079,5 +1092,21 @@
#interrupt-cells = <3>;
interrupts = <1 9 0xf04>;
};
+ ps20: ps2@0x01c2a000 {
+ compatible = "allwinner,sun7i-a20-ps2";
+ reg = <0x01c2a000 0x400>;
+ interrupts = <0 62 4>;
+ clocks = <&apb1_gates 6>;
+ status = "disabled";
+ };
+ ps21: ps2@0x01c2a400 {
+ compatible = "allwinner,sun7i-a20-ps2";
+ reg = <0x01c2a400 0x400>;
+ interrupts = <0 63 4>;
+ clocks = <&apb1_gates 7>;
+ status = "disabled";
+ };
+
+
};
};
--
1.7.9.5
next prev parent reply other threads:[~2014-12-06 23:15 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-06 23:15 [PATCHv2 0/3] ARM:sunxi:ps2 Added support for A10/A20 ps2 controller vishnupatekar
[not found] ` <1417907719-26775-1-git-send-email-VishnuPatekar0510-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2014-12-06 23:15 ` [PATCHv2 1/3] sunxi:dts-bindings:input:ps2 bindings for A10/A20 ps2 vishnupatekar
2014-12-08 22:15 ` Maxime Ripard
2014-12-09 10:21 ` Vishnu Patekar
2014-12-06 23:15 ` [PATCHv2 2/3] sunxi:drivers:input:ps2 Added sunxi A10/A20 ps2 driver vishnupatekar
[not found] ` <1417907719-26775-3-git-send-email-VishnuPatekar0510-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2014-12-08 4:43 ` Vishnu Patekar
2014-12-08 22:41 ` Maxime Ripard
[not found] ` <CAEzqOZu9TWmYyBOP8t+b7mepqdbKjhf-3P-uNJS_Od05XiBLZw@mail.gmail.com>
[not found] ` <CAEzqOZu9TWmYyBOP8t+b7mepqdbKjhf-3P-uNJS_Od05XiBLZw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-12-11 21:09 ` Maxime Ripard
2014-12-06 23:15 ` vishnupatekar [this message]
[not found] ` <1417907719-26775-4-git-send-email-VishnuPatekar0510-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2014-12-08 22:22 ` [PATCHv2 3/3] ARM:dts:sunxi:ps2 dt nodes for A10/A20 PS2 controller Maxime Ripard
2014-12-12 13:15 ` [PATCHv2 0/3] ARM:sunxi:ps2 Added support for A10/A20 ps2 controller Hans de Goede
[not found] ` <548AEA8E.6040100-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2014-12-12 13:55 ` Vishnu Patekar
[not found] <CAEzqOZu49Z99B4DWvuD=E2BKs7ihSVAunshheUn=Z-VAqivUxA@mail.gmail.com>
[not found] ` <CAEzqOZu49Z99B4DWvuD=E2BKs7ihSVAunshheUn=Z-VAqivUxA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-12-11 21:15 ` [PATCHv2 3/3] ARM:dts:sunxi:ps2 dt nodes for A10/A20 PS2 controller Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1417907719-26775-4-git-send-email-VishnuPatekar0510@gmail.com \
--to=vishnupatekar0510-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=dmitry.torokhov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
--cc=ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org \
--cc=leafy.myeh-Q9AEpCAkrSgqDJ6do+/SaQ@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-input-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org \
--cc=linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org \
--cc=pawel.moll-5wv7dgnIgG8@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).