From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
To: linux-input@vger.kernel.org, "Pali Rohár" <pali.rohar@gmail.com>
Cc: Yunkang Tang <yunkang.tang@cn.alps.com>,
Hans de Goede <hdegoede@redhat.com>
Subject: [PATCH 2/6] Input: ALPS - make Rushmore a separate protocol
Date: Wed, 14 Jan 2015 14:55:50 -0800 [thread overview]
Message-ID: <1421276154-8689-3-git-send-email-dmitry.torokhov@gmail.com> (raw)
In-Reply-To: <1421276154-8689-1-git-send-email-dmitry.torokhov@gmail.com>
Even though Rushmore is very close to V3 protocol it is sufficiently
different to warrant it's own protocol name.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
drivers/input/mouse/alps.c | 26 ++++++++++++++++----------
drivers/input/mouse/alps.h | 1 +
2 files changed, 17 insertions(+), 10 deletions(-)
diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c
index d995523..80aa6f8 100644
--- a/drivers/input/mouse/alps.c
+++ b/drivers/input/mouse/alps.c
@@ -99,7 +99,6 @@ static const struct alps_nibble_commands alps_v6_nibble_commands[] = {
#define ALPS_FOUR_BUTTONS 0x40 /* 4 direction button present */
#define ALPS_PS2_INTERLEAVED 0x80 /* 3-byte PS/2 packet interleaved with
6-byte ALPS packet */
-#define ALPS_IS_RUSHMORE 0x100 /* device is a rushmore */
#define ALPS_BUTTONPAD 0x200 /* device is a clickpad */
static const struct alps_model_info alps_model_data[] = {
@@ -412,7 +411,7 @@ static int alps_process_bitmap(struct alps_data *priv,
(2 * (priv->y_bits - 1));
/* y-bitmap order is reversed, except on rushmore */
- if (!(priv->flags & ALPS_IS_RUSHMORE)) {
+ if (priv->proto_version != ALPS_PROTO_V3_RUSHMORE) {
fields->mt[0].y = priv->y_max - fields->mt[0].y;
fields->mt[1].y = priv->y_max - fields->mt[1].y;
}
@@ -1275,7 +1274,7 @@ static psmouse_ret_t alps_process_byte(struct psmouse *psmouse)
psmouse->pktcnt - 1,
psmouse->packet[psmouse->pktcnt - 1]);
- if (priv->proto_version == ALPS_PROTO_V3 &&
+ if (priv->proto_version == ALPS_PROTO_V3_RUSHMORE &&
psmouse->pktcnt == psmouse->pktsize) {
/*
* Some Dell boxes, such as Latitude E6440 or E7440
@@ -2182,6 +2181,7 @@ static void alps_set_defaults(struct alps_data *priv)
priv->x_max = 1023;
priv->y_max = 767;
break;
+
case ALPS_PROTO_V3:
priv->hw_init = alps_hw_init_v3;
priv->process_packet = alps_process_packet_v3;
@@ -2190,6 +2190,18 @@ static void alps_set_defaults(struct alps_data *priv)
priv->nibble_commands = alps_v3_nibble_commands;
priv->addr_command = PSMOUSE_CMD_RESET_WRAP;
break;
+
+ case ALPS_PROTO_V3_RUSHMORE:
+ priv->hw_init = alps_hw_init_rushmore_v3;
+ priv->process_packet = alps_process_packet_v3;
+ priv->set_abs_params = alps_set_abs_params_mt;
+ priv->decode_fields = alps_decode_rushmore;
+ priv->nibble_commands = alps_v3_nibble_commands;
+ priv->addr_command = PSMOUSE_CMD_RESET_WRAP;
+ priv->x_bits = 16;
+ priv->y_bits = 12;
+ break;
+
case ALPS_PROTO_V4:
priv->hw_init = alps_hw_init_v4;
priv->process_packet = alps_process_packet_v4;
@@ -2313,15 +2325,9 @@ static int alps_identify(struct psmouse *psmouse, struct alps_data *priv)
return 0;
} else if (ec[0] == 0x88 && ec[1] == 0x08) {
- priv->proto_version = ALPS_PROTO_V3;
+ priv->proto_version = ALPS_PROTO_V3_RUSHMORE;
alps_set_defaults(priv);
- priv->hw_init = alps_hw_init_rushmore_v3;
- priv->decode_fields = alps_decode_rushmore;
- priv->x_bits = 16;
- priv->y_bits = 12;
- priv->flags |= ALPS_IS_RUSHMORE;
-
/* hack to make addr_command, nibble_command available */
psmouse->private = priv;
diff --git a/drivers/input/mouse/alps.h b/drivers/input/mouse/alps.h
index 94645bf..f19908a 100644
--- a/drivers/input/mouse/alps.h
+++ b/drivers/input/mouse/alps.h
@@ -17,6 +17,7 @@
#define ALPS_PROTO_V1 0x100
#define ALPS_PROTO_V2 0x200
#define ALPS_PROTO_V3 0x300
+#define ALPS_PROTO_V3_RUSHMORE 0x310
#define ALPS_PROTO_V4 0x400
#define ALPS_PROTO_V5 0x500
#define ALPS_PROTO_V6 0x600
--
2.2.0.rc0.207.ga3a616c
next prev parent reply other threads:[~2015-01-14 22:56 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-14 22:55 [PATCH 0/6] Fixes for ALPS trackstick Dmitry Torokhov
2015-01-14 22:55 ` [PATCH 1/6] Input: ALPS - renumber protocol numbers Dmitry Torokhov
2015-01-14 22:55 ` Dmitry Torokhov [this message]
2015-01-14 22:55 ` [PATCH 3/6] Input: ALPS - split protocol data from model info Dmitry Torokhov
2015-01-14 22:55 ` [PATCH 4/6] Input: ALPS - consolidate setting protocol parameters Dmitry Torokhov
2015-01-14 22:55 ` [PATCH 5/6] Input: ALPS - fix trackstick detection on some Dell Latitudes Dmitry Torokhov
2015-01-15 20:21 ` Pali Rohár
2015-01-15 21:00 ` Dmitry Torokhov
2015-01-17 10:26 ` Pali Rohár
2015-02-02 5:34 ` Dmitry Torokhov
2015-02-02 10:51 ` Pali Rohár
2015-01-14 22:55 ` [PATCH 6/6] Input: ALPS - mix trackstick and external PS/2 mouse data Dmitry Torokhov
2015-01-15 20:34 ` Pali Rohár
2015-01-15 21:00 ` Dmitry Torokhov
2015-01-18 9:45 ` Pali Rohár
2015-01-15 10:49 ` [PATCH 0/6] Fixes for ALPS trackstick Pali Rohár
2015-01-15 18:18 ` Dmitry Torokhov
2015-01-15 19:19 ` Pali Rohár
2015-01-15 19:38 ` Dmitry Torokhov
2015-01-15 20:28 ` Pali Rohár
2015-01-15 21:02 ` Dmitry Torokhov
2015-01-17 10:01 ` Pali Rohár
2015-01-18 7:22 ` Dmitry Torokhov
2015-01-18 9:47 ` Pali Rohár
2015-01-24 22:20 ` Pali Rohár
2015-02-02 5:49 ` Dmitry Torokhov
2015-02-02 10:49 ` Pali Rohár
2015-02-02 14:27 ` Pali Rohár
2015-02-08 12:26 ` Pali Rohár
2015-02-10 6:32 ` Dmitry Torokhov
2015-02-11 18:13 ` Pali Rohár
2015-02-12 7:52 ` Dmitry Torokhov
2015-02-12 20:25 ` Pali Rohár
2015-02-05 11:41 ` Pali Rohár
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1421276154-8689-3-git-send-email-dmitry.torokhov@gmail.com \
--to=dmitry.torokhov@gmail.com \
--cc=hdegoede@redhat.com \
--cc=linux-input@vger.kernel.org \
--cc=pali.rohar@gmail.com \
--cc=yunkang.tang@cn.alps.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).