From mboxrd@z Thu Jan 1 00:00:00 1970 From: Markus Pargmann Subject: [PATCH v6 2/8] ARM: dt: Binding documentation for imx25 GCQ Date: Thu, 29 Jan 2015 15:09:10 +0100 Message-ID: <1422540556-14828-3-git-send-email-mpa@pengutronix.de> References: <1422540556-14828-1-git-send-email-mpa@pengutronix.de> Return-path: In-Reply-To: <1422540556-14828-1-git-send-email-mpa-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Shawn Guo , Samuel Ortiz , Dmitry Torokhov , Jonathan Cameron , Fabio Estevam , Peter Meerwald , Hartmut Knaack Cc: Denis Carikli , =?UTF-8?q?Eric=20B=C3=A9nard?= , Sascha Hauer , linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, Lee Jones , linux-input-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-iio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Lars-Peter Clausen , devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Rob Herring , Pawel Moll , Mark Rutland , Ian Campbell , Kumar Gala , Markus Pargmann List-Id: linux-input@vger.kernel.org The documentation describes the bindings for the imx25 GCQ unit which is essentially a generic conversion queue using the imx25 ADC. Signed-off-by: Markus Pargmann --- Notes: Changes in v6: - Moved the raw_read code out to a different function to cleanup the code - Changed bindings to use adc-refp and adc-refn. Also a bit of cleanup in the setup routine. - Added defines for a complete list of references in the dt binding macros Changes in v5: - Fixed locking - Removed module owner .../devicetree/bindings/iio/adc/fsl,imx25-gcq.txt | 54 ++++++++++++++++++++++ 1 file changed, 54 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/adc/fsl,imx25-gcq.txt diff --git a/Documentation/devicetree/bindings/iio/adc/fsl,imx25-gcq.txt b/Documentation/devicetree/bindings/iio/adc/fsl,imx25-gcq.txt new file mode 100644 index 000000000000..9f7c08990034 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/fsl,imx25-gcq.txt @@ -0,0 +1,54 @@ +Freescale i.MX25 ADC GCQ device + +This is a generic conversion queue device that can convert any of the +analog inputs using the ADC unit of the i.MX25. + +Required properties: + - compatible: Should be "fsl,imx25-gcq". + - reg: Should be the register range of the module. + - interrupts: Should be the interrupt number of the module. + Typically this is <1>. + - interrupt-parent: phandle to the tsadc module of the i.MX25. + - #address-cells: Should be <1> (setting for the subnodes) + - #size-cells: Should be <0> (setting for the subnodes) + +Optional properties: + - vref-supply: The regulator supplying the ADC reference voltage. + Required when at least one subnode uses the external reference. + +Sub-nodes: +Optionally you can define subnodes which define the reference voltage +for the analog inputs. + +Required properties for subnodes: + - reg: Should be the number of the analog input. + 0: xp + 1: yp + 2: xn + 3: yn + 4: wiper + 5: inaux0 + 6: inaux1 + 7: inaux2 +Optional properties for subnodes: + - fsl,adc-refp: specifies the positive reference input as defined in + + - fsl,adc-refn: specifies the negative reference input as defined in + + +Example: + + adc: adc@50030800 { + compatible = "fsl,imx25-gcq"; + reg = <0x50030800 0x60>; + interrupt-parent = <&tscadc>; + interrupts = <1>; + #address-cells = <1>; + #size-cells = <0>; + + inaux@5 { + reg = <5>; + fsl,adc-refp = ; + fsl,adc-refn = ; + }; + }; -- 2.1.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html