From: Sonic Zhang <sonic.adi@gmail.com>
To: Dmitry Torokhov <dmitry.torokhov@gmail.com>, linux-input@vger.kernel.org
Cc: Michael Hennerich <michael.hennerich@analog.com>,
adi-buildroot-devel@lists.sourceforge.net,
Sonic Zhang <sonic.zhang@analog.com>
Subject: [PATCH v2] bfin_rotary: convert to use managed resources
Date: Thu, 5 Feb 2015 16:29:13 +0800 [thread overview]
Message-ID: <1423124953-9564-1-git-send-email-sonic.adi@gmail.com> (raw)
From: Sonic Zhang <sonic.zhang@analog.com>
- remap rotary register physical address into kernel space in probe
- replace kzalloc with devm_kzalloc
- replace request_irq with devm_request_irq
- remove memory free and irq free from the device remove function
- use devm_input_allocate_device
v2-changes:
- remove rotary register address remap operation from this patch
- Use devm_add_action() to integrate freeing of pins into the
rest of devm* unwind sequence.
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
---
drivers/input/misc/bfin_rotary.c | 84 ++++++++++++++++++--------------------
1 file changed, 39 insertions(+), 45 deletions(-)
diff --git a/drivers/input/misc/bfin_rotary.c b/drivers/input/misc/bfin_rotary.c
index dd929ad..80f66e7 100644
--- a/drivers/input/misc/bfin_rotary.c
+++ b/drivers/input/misc/bfin_rotary.c
@@ -93,6 +93,13 @@ static irqreturn_t bfin_rotary_isr(int irq, void *dev_id)
return IRQ_HANDLED;
}
+
+static void bfin_rotary_free_action(void *data)
+{
+ unsigned short *pin_list = (unsigned short *)data;
+ peripheral_free_list(pin_list);
+}
+
static int bfin_rotary_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -102,6 +109,31 @@ static int bfin_rotary_probe(struct platform_device *pdev)
struct input_dev *input;
int error;
+ rotary = devm_kzalloc(dev, sizeof(struct bfin_rot), GFP_KERNEL);
+ if (!rotary) {
+ dev_err(dev, "fail to malloc bfin_rot\n");
+ return -ENOMEM;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ rotary->base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(rotary->base))
+ return PTR_ERR(rotary->base);
+
+ rotary->irq = platform_get_irq(pdev, 0);
+ if (rotary->irq < 0) {
+ dev_err(dev, "No rotary IRQ specified\n");
+ return -ENOENT;
+ }
+
+ error = devm_request_irq(dev, rotary->irq, bfin_rotary_isr,
+ 0, dev_name(&pdev->dev), pdev);
+ if (error) {
+ dev_err(dev, "unable to claim irq %d; error %d\n",
+ rotary->irq, error);
+ return error;
+ }
+
/* Basic validation */
if ((pdata->rotary_up_key && !pdata->rotary_down_key) ||
(!pdata->rotary_up_key && pdata->rotary_down_key)) {
@@ -110,23 +142,15 @@ static int bfin_rotary_probe(struct platform_device *pdev)
error = peripheral_request_list(pdata->pin_list, dev_name(&pdev->dev));
if (error) {
- dev_err(&pdev->dev, "requesting peripherals failed\n");
+ dev_err(dev, "requesting peripherals failed\n");
return error;
}
- rotary = kzalloc(sizeof(struct bfin_rot), GFP_KERNEL);
- input = input_allocate_device();
- if (!rotary || !input) {
- error = -ENOMEM;
- goto out1;
- }
+ devm_add_action(dev, bfin_rotary_free_action, pdata->pin_list);
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- rotary->base = devm_ioremap_resource(dev, res);
- if (IS_ERR(rotary->base)) {
- error = PTR_ERR(rotary->base);
- goto out1;
- }
+ input = devm_input_allocate_device(dev);
+ if (!input)
+ return -ENOMEM;
rotary->input = input;
@@ -135,10 +159,6 @@ static int bfin_rotary_probe(struct platform_device *pdev)
rotary->button_key = pdata->rotary_button_key;
rotary->rel_code = pdata->rotary_rel_code;
- error = rotary->irq = platform_get_irq(pdev, 0);
- if (error < 0)
- goto out1;
-
input->name = pdev->name;
input->phys = "bfin-rotary/input0";
input->dev.parent = &pdev->dev;
@@ -164,20 +184,10 @@ static int bfin_rotary_probe(struct platform_device *pdev)
__set_bit(rotary->button_key, input->keybit);
}
- error = request_irq(rotary->irq, bfin_rotary_isr,
- 0, dev_name(&pdev->dev), pdev);
- if (error) {
- dev_err(&pdev->dev,
- "unable to claim irq %d; error %d\n",
- rotary->irq, error);
- goto out1;
- }
-
error = input_register_device(input);
if (error) {
- dev_err(&pdev->dev,
- "unable to register input device (%d)\n", error);
- goto out2;
+ dev_err(dev, "unable to register input device (%d)\n", error);
+ return error;
}
if (pdata->rotary_button_key)
@@ -201,31 +211,15 @@ static int bfin_rotary_probe(struct platform_device *pdev)
device_init_wakeup(&pdev->dev, 1);
return 0;
-
-out2:
- free_irq(rotary->irq, pdev);
-out1:
- input_free_device(input);
- kfree(rotary);
- peripheral_free_list(pdata->pin_list);
-
- return error;
}
static int bfin_rotary_remove(struct platform_device *pdev)
{
- struct bfin_rotary_platform_data *pdata = dev_get_platdata(&pdev->dev);
struct bfin_rot *rotary = platform_get_drvdata(pdev);
writew(0, rotary->base + CNT_CONFIG_OFF);
writew(0, rotary->base + CNT_IMASK_OFF);
- free_irq(rotary->irq, pdev);
- input_unregister_device(rotary->input);
- peripheral_free_list(pdata->pin_list);
-
- kfree(rotary);
-
return 0;
}
--
1.7.9.5
next reply other threads:[~2015-02-05 8:31 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-05 8:29 Sonic Zhang [this message]
2015-02-06 6:04 ` [PATCH v2] bfin_rotary: convert to use managed resources Dmitry Torokhov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1423124953-9564-1-git-send-email-sonic.adi@gmail.com \
--to=sonic.adi@gmail.com \
--cc=adi-buildroot-devel@lists.sourceforge.net \
--cc=dmitry.torokhov@gmail.com \
--cc=linux-input@vger.kernel.org \
--cc=michael.hennerich@analog.com \
--cc=sonic.zhang@analog.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).