From mboxrd@z Thu Jan 1 00:00:00 1970 From: Simon Wood Subject: [PATCH] HID: hid-sony: Prevent LED overrun Date: Tue, 17 Feb 2015 20:14:50 -0700 Message-ID: <1424229290-32089-1-git-send-email-simon@mungewell.org> Return-path: Received: from smtp-out-04.shaw.ca ([64.59.134.12]:4365 "EHLO smtp-out-04.shaw.ca" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751609AbbBRDYe (ORCPT ); Tue, 17 Feb 2015 22:24:34 -0500 Sender: linux-input-owner@vger.kernel.org List-Id: linux-input@vger.kernel.org To: linux-input@vger.kernel.org Cc: linux-kernel@vger.kernel.org, Jiri Kosina , Simon Wood If the value written to led1 is larger than 1 (for SixAxis or Intec controllers), it can effect other leds on the device. For example: # echo 3 > /sys/class/leds/0003\:054C\:0268.0013\:\:sony1/brightness turns on both led1 and led2, led2 does not then behave as expected through it's own interface. Patch limits the LEDs 'value' to the 'max brightness', thus preventing bug. Tested with SixAxis DS3, DS4 and Intec (3rd party) controllers, via USB connection. Signed-off-by: Simon Wood --- drivers/hid/hid-sony.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/hid/hid-sony.c b/drivers/hid/hid-sony.c index 31e9d25..385fa1f 100644 --- a/drivers/hid/hid-sony.c +++ b/drivers/hid/hid-sony.c @@ -1296,6 +1296,9 @@ static void sony_led_set_brightness(struct led_classdev *led, drv_data->led_delay_on[n] || drv_data->led_delay_off[n]))) { + if (value > led->max_brightness) + value = led->max_brightness; + drv_data->led_state[n] = value; /* Setting the brightness stops the blinking */ -- 1.9.1