* [PATCH 1/7] arm: imx: power-off: change to syscon to access register
2015-05-14 17:18 [PATCH 0/7] Change snvs rtc and poweroff to use syscon add pwrkey driver Frank.Li-KZfg59tc24xl57MIdRCFDg
@ 2015-05-14 17:18 ` Frank.Li
2015-05-14 17:18 ` [PATCH 2/7] rtc: arm: imx: snvs: change use " Frank.Li
` (5 subsequent siblings)
6 siblings, 0 replies; 8+ messages in thread
From: Frank.Li @ 2015-05-14 17:18 UTC (permalink / raw)
To: lznuaa, shawn.guo, dmitry.torokhov, robh+dt
Cc: devicetree, Frank Li, rtc-linux, linux-pm, linux-input,
linux-arm-kernel
From: Frank Li <Frank.Li@freescale.com>
snvs is MFP device, which included rtc, ON/OFF key, power off
Signed-off-by: Frank Li <Frank.Li@freescale.com>
---
drivers/power/reset/imx-snvs-poweroff.c | 21 +++++++++++++++------
1 file changed, 15 insertions(+), 6 deletions(-)
diff --git a/drivers/power/reset/imx-snvs-poweroff.c b/drivers/power/reset/imx-snvs-poweroff.c
index ad6ce50..b4881d7 100644
--- a/drivers/power/reset/imx-snvs-poweroff.c
+++ b/drivers/power/reset/imx-snvs-poweroff.c
@@ -22,21 +22,30 @@
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/platform_device.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
-static void __iomem *snvs_base;
+static struct regmap *snvs;
+
+#define SNVS_LPCR 0x38
static void do_imx_poweroff(void)
{
- u32 value = readl(snvs_base);
-
/* set TOP and DP_EN bit */
- writel(value | 0x60, snvs_base);
+ regmap_update_bits(snvs, SNVS_LPCR, 0x60, 0x60);
}
static int imx_poweroff_probe(struct platform_device *pdev)
{
- snvs_base = of_iomap(pdev->dev.of_node, 0);
- if (!snvs_base) {
+ struct device_node *nd;
+
+ nd = of_get_parent(pdev->dev.of_node);
+ if (!nd)
+ return -ENODEV;
+ snvs = syscon_node_to_regmap (nd);
+ of_node_put(nd);
+
+ if (!snvs) {
dev_err(&pdev->dev, "failed to get memory\n");
return -ENODEV;
}
--
1.9.1
^ permalink raw reply related [flat|nested] 8+ messages in thread* [PATCH 2/7] rtc: arm: imx: snvs: change use syscon to access register
2015-05-14 17:18 [PATCH 0/7] Change snvs rtc and poweroff to use syscon add pwrkey driver Frank.Li-KZfg59tc24xl57MIdRCFDg
2015-05-14 17:18 ` [PATCH 1/7] arm: imx: power-off: change to syscon to access register Frank.Li
@ 2015-05-14 17:18 ` Frank.Li
2015-05-14 17:18 ` [PATCH 3/7] Document: dt: fsl: snvs: change support syscon Frank.Li
` (4 subsequent siblings)
6 siblings, 0 replies; 8+ messages in thread
From: Frank.Li @ 2015-05-14 17:18 UTC (permalink / raw)
To: lznuaa, shawn.guo, dmitry.torokhov, robh+dt
Cc: linux-arm-kernel, linux-input, rtc-linux, linux-pm, devicetree,
Frank Li
From: Frank Li <Frank.Li@freescale.com>
snvs included rtc, on/off key, power-off module
change to syscon to access register
Signed-off-by: Frank Li <Frank.Li@freescale.com>
---
drivers/rtc/rtc-snvs.c | 124 +++++++++++++++++++++----------------------------
1 file changed, 54 insertions(+), 70 deletions(-)
diff --git a/drivers/rtc/rtc-snvs.c b/drivers/rtc/rtc-snvs.c
index 0479e80..4e85fbe 100644
--- a/drivers/rtc/rtc-snvs.c
+++ b/drivers/rtc/rtc-snvs.c
@@ -18,14 +18,16 @@
#include <linux/platform_device.h>
#include <linux/rtc.h>
#include <linux/clk.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
/* These register offsets are relative to LP (Low Power) range */
-#define SNVS_LPCR 0x04
-#define SNVS_LPSR 0x18
-#define SNVS_LPSRTCMR 0x1c
-#define SNVS_LPSRTCLR 0x20
-#define SNVS_LPTAR 0x24
-#define SNVS_LPPGDR 0x30
+#define SNVS_LPCR 0x38
+#define SNVS_LPSR 0x4c
+#define SNVS_LPSRTCMR 0x50
+#define SNVS_LPSRTCLR 0x54
+#define SNVS_LPTAR 0x58
+#define SNVS_LPPGDR 0x64
#define SNVS_LPCR_SRTC_ENV (1 << 0)
#define SNVS_LPCR_LPTA_EN (1 << 1)
@@ -37,31 +39,35 @@
struct snvs_rtc_data {
struct rtc_device *rtc;
- void __iomem *ioaddr;
+ struct regmap *snvs;
int irq;
spinlock_t lock;
struct clk *clk;
};
-static u32 rtc_read_lp_counter(void __iomem *ioaddr)
+static u32 rtc_read_lp_counter(struct regmap *snvs)
{
u64 read1, read2;
-
+ u32 val;
do {
- read1 = readl(ioaddr + SNVS_LPSRTCMR);
+ regmap_read(snvs, SNVS_LPSRTCMR, &val);
+ read1 = val;
read1 <<= 32;
- read1 |= readl(ioaddr + SNVS_LPSRTCLR);
+ regmap_read(snvs, SNVS_LPSRTCLR, &val);
+ read1 |= val;
- read2 = readl(ioaddr + SNVS_LPSRTCMR);
+ regmap_read(snvs, SNVS_LPSRTCMR, &val);
+ read2 = val;
read2 <<= 32;
- read2 |= readl(ioaddr + SNVS_LPSRTCLR);
+ regmap_read(snvs, SNVS_LPSRTCLR, &val);
+ read2 |= val;
} while (read1 != read2);
/* Convert 47-bit counter to 32-bit raw second count */
return (u32) (read1 >> CNTR_TO_SECS_SH);
}
-static void rtc_write_sync_lp(void __iomem *ioaddr)
+static void rtc_write_sync_lp(struct regmap *snvs)
{
u32 count1, count2, count3;
int i;
@@ -69,15 +75,15 @@ static void rtc_write_sync_lp(void __iomem *ioaddr)
/* Wait for 3 CKIL cycles */
for (i = 0; i < 3; i++) {
do {
- count1 = readl(ioaddr + SNVS_LPSRTCLR);
- count2 = readl(ioaddr + SNVS_LPSRTCLR);
+ regmap_read(snvs, SNVS_LPSRTCLR, &count1);
+ regmap_read(snvs, SNVS_LPSRTCLR, &count2);
} while (count1 != count2);
/* Now wait until counter value changes */
do {
do {
- count2 = readl(ioaddr + SNVS_LPSRTCLR);
- count3 = readl(ioaddr + SNVS_LPSRTCLR);
+ regmap_read(snvs, SNVS_LPSRTCLR, &count2);
+ regmap_read(snvs, SNVS_LPSRTCLR, &count3);
} while (count2 != count3);
} while (count3 == count1);
}
@@ -85,23 +91,14 @@ static void rtc_write_sync_lp(void __iomem *ioaddr)
static int snvs_rtc_enable(struct snvs_rtc_data *data, bool enable)
{
- unsigned long flags;
int timeout = 1000;
u32 lpcr;
- spin_lock_irqsave(&data->lock, flags);
-
- lpcr = readl(data->ioaddr + SNVS_LPCR);
- if (enable)
- lpcr |= SNVS_LPCR_SRTC_ENV;
- else
- lpcr &= ~SNVS_LPCR_SRTC_ENV;
- writel(lpcr, data->ioaddr + SNVS_LPCR);
-
- spin_unlock_irqrestore(&data->lock, flags);
+ regmap_update_bits(data->snvs, SNVS_LPCR, SNVS_LPCR_SRTC_ENV,
+ enable ? SNVS_LPCR_SRTC_ENV : 0);
while (--timeout) {
- lpcr = readl(data->ioaddr + SNVS_LPCR);
+ regmap_read(data->snvs, SNVS_LPCR, &lpcr);
if (enable) {
if (lpcr & SNVS_LPCR_SRTC_ENV)
@@ -121,7 +118,7 @@ static int snvs_rtc_enable(struct snvs_rtc_data *data, bool enable)
static int snvs_rtc_read_time(struct device *dev, struct rtc_time *tm)
{
struct snvs_rtc_data *data = dev_get_drvdata(dev);
- unsigned long time = rtc_read_lp_counter(data->ioaddr);
+ unsigned long time = rtc_read_lp_counter(data->snvs);
rtc_time_to_tm(time, tm);
@@ -139,8 +136,8 @@ static int snvs_rtc_set_time(struct device *dev, struct rtc_time *tm)
snvs_rtc_enable(data, false);
/* Write 32-bit time to 47-bit timer, leaving 15 LSBs blank */
- writel(time << CNTR_TO_SECS_SH, data->ioaddr + SNVS_LPSRTCLR);
- writel(time >> (32 - CNTR_TO_SECS_SH), data->ioaddr + SNVS_LPSRTCMR);
+ regmap_write(data->snvs, SNVS_LPSRTCLR, time << CNTR_TO_SECS_SH);
+ regmap_write(data->snvs, SNVS_LPSRTCMR, time >> (32 - CNTR_TO_SECS_SH));
/* Enable RTC again */
snvs_rtc_enable(data, true);
@@ -153,10 +150,10 @@ static int snvs_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
struct snvs_rtc_data *data = dev_get_drvdata(dev);
u32 lptar, lpsr;
- lptar = readl(data->ioaddr + SNVS_LPTAR);
+ regmap_read(data->snvs, SNVS_LPTAR, &lptar);
rtc_time_to_tm(lptar, &alrm->time);
- lpsr = readl(data->ioaddr + SNVS_LPSR);
+ regmap_read(data->snvs, SNVS_LPSR, &lpsr);
alrm->pending = (lpsr & SNVS_LPSR_LPTA) ? 1 : 0;
return 0;
@@ -165,21 +162,11 @@ static int snvs_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
static int snvs_rtc_alarm_irq_enable(struct device *dev, unsigned int enable)
{
struct snvs_rtc_data *data = dev_get_drvdata(dev);
- u32 lpcr;
- unsigned long flags;
- spin_lock_irqsave(&data->lock, flags);
+ regmap_update_bits(data->snvs, SNVS_LPCR, (SNVS_LPCR_LPTA_EN | SNVS_LPCR_LPWUI_EN),
+ enable ? (SNVS_LPCR_LPTA_EN | SNVS_LPCR_LPWUI_EN) : 0);
- lpcr = readl(data->ioaddr + SNVS_LPCR);
- if (enable)
- lpcr |= (SNVS_LPCR_LPTA_EN | SNVS_LPCR_LPWUI_EN);
- else
- lpcr &= ~(SNVS_LPCR_LPTA_EN | SNVS_LPCR_LPWUI_EN);
- writel(lpcr, data->ioaddr + SNVS_LPCR);
-
- spin_unlock_irqrestore(&data->lock, flags);
-
- rtc_write_sync_lp(data->ioaddr);
+ rtc_write_sync_lp(data->snvs);
return 0;
}
@@ -189,24 +176,14 @@ static int snvs_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
struct snvs_rtc_data *data = dev_get_drvdata(dev);
struct rtc_time *alrm_tm = &alrm->time;
unsigned long time;
- unsigned long flags;
- u32 lpcr;
rtc_tm_to_time(alrm_tm, &time);
- spin_lock_irqsave(&data->lock, flags);
-
- /* Have to clear LPTA_EN before programming new alarm time in LPTAR */
- lpcr = readl(data->ioaddr + SNVS_LPCR);
- lpcr &= ~SNVS_LPCR_LPTA_EN;
- writel(lpcr, data->ioaddr + SNVS_LPCR);
-
- spin_unlock_irqrestore(&data->lock, flags);
-
- writel(time, data->ioaddr + SNVS_LPTAR);
+ regmap_update_bits(data->snvs, SNVS_LPCR, SNVS_LPCR_LPTA_EN, 0);
+ regmap_write(data->snvs, SNVS_LPTAR, time);
/* Clear alarm interrupt status bit */
- writel(SNVS_LPSR_LPTA, data->ioaddr + SNVS_LPSR);
+ regmap_write(data->snvs, SNVS_LPSR, SNVS_LPSR_LPTA);
return snvs_rtc_alarm_irq_enable(dev, alrm->enabled);
}
@@ -226,7 +203,7 @@ static irqreturn_t snvs_rtc_irq_handler(int irq, void *dev_id)
u32 lpsr;
u32 events = 0;
- lpsr = readl(data->ioaddr + SNVS_LPSR);
+ regmap_read(data->snvs, SNVS_LPSR, &lpsr);
if (lpsr & SNVS_LPSR_LPTA) {
events |= (RTC_AF | RTC_IRQF);
@@ -238,7 +215,7 @@ static irqreturn_t snvs_rtc_irq_handler(int irq, void *dev_id)
}
/* clear interrupt status */
- writel(lpsr, data->ioaddr + SNVS_LPSR);
+ regmap_write(data->snvs, SNVS_LPSR, lpsr);
return events ? IRQ_HANDLED : IRQ_NONE;
}
@@ -246,17 +223,24 @@ static irqreturn_t snvs_rtc_irq_handler(int irq, void *dev_id)
static int snvs_rtc_probe(struct platform_device *pdev)
{
struct snvs_rtc_data *data;
- struct resource *res;
int ret;
+ struct device_node *snvs_np;
data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
if (!data)
return -ENOMEM;
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- data->ioaddr = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(data->ioaddr))
- return PTR_ERR(data->ioaddr);
+ snvs_np = of_get_parent(pdev->dev.of_node);
+ if (!snvs_np)
+ return -ENODEV;
+
+ data->snvs = syscon_node_to_regmap(snvs_np);
+ of_node_put(snvs_np);
+
+ if (!data->snvs) {
+ pr_err("Can't snvs syscon\n");
+ return -ENODEV;
+ }
data->irq = platform_get_irq(pdev, 0);
if (data->irq < 0)
@@ -279,10 +263,10 @@ static int snvs_rtc_probe(struct platform_device *pdev)
spin_lock_init(&data->lock);
/* Initialize glitch detect */
- writel(SNVS_LPPGDR_INIT, data->ioaddr + SNVS_LPPGDR);
+ regmap_write(data->snvs, SNVS_LPPGDR, SNVS_LPPGDR_INIT);
/* Clear interrupt status */
- writel(0xffffffff, data->ioaddr + SNVS_LPSR);
+ regmap_write(data->snvs, SNVS_LPSR, 0xffffffff);
/* Enable RTC */
snvs_rtc_enable(data, true);
--
1.9.1
^ permalink raw reply related [flat|nested] 8+ messages in thread* [PATCH 3/7] Document: dt: fsl: snvs: change support syscon
2015-05-14 17:18 [PATCH 0/7] Change snvs rtc and poweroff to use syscon add pwrkey driver Frank.Li-KZfg59tc24xl57MIdRCFDg
2015-05-14 17:18 ` [PATCH 1/7] arm: imx: power-off: change to syscon to access register Frank.Li
2015-05-14 17:18 ` [PATCH 2/7] rtc: arm: imx: snvs: change use " Frank.Li
@ 2015-05-14 17:18 ` Frank.Li
[not found] ` <1431623933-3473-1-git-send-email-Frank.Li-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
` (3 subsequent siblings)
6 siblings, 0 replies; 8+ messages in thread
From: Frank.Li @ 2015-05-14 17:18 UTC (permalink / raw)
To: lznuaa, shawn.guo, dmitry.torokhov, robh+dt
Cc: linux-arm-kernel, linux-input, rtc-linux, linux-pm, devicetree,
Frank Li
From: Frank Li <Frank.Li@freescale.com>
snvs actually is multi fucntion driver.
Change to use syscon to access register.
Signed-off-by: Frank Li <Frank.Li@freescale.com>
---
.../devicetree/bindings/crypto/fsl-sec4.txt | 51 ++++++++++++++++------
.../bindings/power_supply/imx-snvs-poweroff.txt | 24 +---------
2 files changed, 39 insertions(+), 36 deletions(-)
diff --git a/Documentation/devicetree/bindings/crypto/fsl-sec4.txt b/Documentation/devicetree/bindings/crypto/fsl-sec4.txt
index e402277..ca04206 100644
--- a/Documentation/devicetree/bindings/crypto/fsl-sec4.txt
+++ b/Documentation/devicetree/bindings/crypto/fsl-sec4.txt
@@ -288,12 +288,13 @@ Secure Non-Volatile Storage (SNVS) Node
Node defines address range and the associated
interrupt for the SNVS function. This function
monitors security state information & reports
- security violations.
+ security violations. This also included rtc,
+ system power off and ON/OFF key.
- compatible
Usage: required
Value type: <string>
- Definition: Must include "fsl,sec-v4.0-mon".
+ Definition: Must include "fsl,sec-v4.0-mon" and "syscon".
- reg
Usage: required
@@ -324,7 +325,7 @@ Secure Non-Volatile Storage (SNVS) Node
the child address, parent address, & length.
- interrupts
- Usage: required
+ Usage: optional
Value type: <prop_encoded-array>
Definition: Specifies the interrupts generated by this
device. The value of the interrupts property
@@ -341,7 +342,7 @@ Secure Non-Volatile Storage (SNVS) Node
EXAMPLE
sec_mon@314000 {
- compatible = "fsl,sec-v4.0-mon";
+ compatible = "fsl,sec-v4.0-mon", "syscon";
reg = <0x314000 0x1000>;
ranges = <0 0x314000 0x1000>;
interrupt-parent = <&mpic>;
@@ -358,19 +359,41 @@ Secure Non-Volatile Storage (SNVS) Low Power (LP) RTC Node
Value type: <string>
Definition: Must include "fsl,sec-v4.0-mon-rtc-lp".
- - reg
+ - interrupts
Usage: required
- Value type: <prop-encoded-array>
- Definition: A standard property. Specifies the physical
- address and length of the SNVS LP configuration registers.
+ Value type: <prop_encoded-array>
+ Definition: Specifies the interrupts generated by this
+ device. The value of the interrupts property
+ consists of one interrupt specifier. The format
+ of the specifier is defined by the binding document
+ describing the node's interrupt parent.
EXAMPLE
- sec_mon_rtc_lp@314000 {
+ sec_mon_rtc_lp@1 {
compatible = "fsl,sec-v4.0-mon-rtc-lp";
- reg = <0x34 0x58>;
+ interrupts = <93 2>;
};
=====================================================================
+System power off Driver
+
+ A SNVS child node that define system power off
+ SNVS_LPCR in SNVS module can power off the whole system by pull
+ PMIC_ON_REQ low if PMIC_ON_REQ is connected with external PMIC.
+ If you don't want to use PMIC_ON_REQ as power on/off control,
+ please set status='disabled' to disable this driver.
+
+ - compatible
+ Usage: regquied
+ Value type: <string>
+ Definition: Must include "fsl,sec-v4.0-poweroff"
+
+EXAMPLE
+ snvs_poweroff: snvs-poweroff {
+ compatible = "fsl,sec-v4.0-poweroff";
+};
+
+=====================================================================
FULL EXAMPLE
crypto: crypto@300000 {
@@ -443,13 +466,15 @@ FULL EXAMPLE
compatible = "fsl,sec-v4.0-mon";
reg = <0x314000 0x1000>;
ranges = <0 0x314000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <93 2>;
sec_mon_rtc_lp@34 {
compatible = "fsl,sec-v4.0-mon-rtc-lp";
- reg = <0x34 0x58>;
+ interrupts = <93 2>;
};
+
+ snvs_poweroff: snvs-poweroff@38 {
+ compatible = "fsl,sec-v4.0-poweroff";
+ };
};
=====================================================================
diff --git a/Documentation/devicetree/bindings/power_supply/imx-snvs-poweroff.txt b/Documentation/devicetree/bindings/power_supply/imx-snvs-poweroff.txt
index dc7c9ba..70c1425 100644
--- a/Documentation/devicetree/bindings/power_supply/imx-snvs-poweroff.txt
+++ b/Documentation/devicetree/bindings/power_supply/imx-snvs-poweroff.txt
@@ -1,23 +1 @@
-i.mx6 Poweroff Driver
-
-SNVS_LPCR in SNVS module can power off the whole system by pull
-PMIC_ON_REQ low if PMIC_ON_REQ is connected with external PMIC.
-If you don't want to use PMIC_ON_REQ as power on/off control,
-please set status='disabled' to disable this driver.
-
-Required Properties:
--compatible: "fsl,sec-v4.0-poweroff"
--reg: Specifies the physical address of the SNVS_LPCR register
-
-Example:
- snvs@020cc000 {
- compatible = "fsl,sec-v4.0-mon", "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x020cc000 0x4000>;
- .....
- snvs_poweroff: snvs-poweroff@38 {
- compatible = "fsl,sec-v4.0-poweroff";
- reg = <0x38 0x4>;
- };
- }
+See Documentation/devicetree/bindings/crypto/fsl-sec4.txt
--
1.9.1
^ permalink raw reply related [flat|nested] 8+ messages in thread[parent not found: <1431623933-3473-1-git-send-email-Frank.Li-KZfg59tc24xl57MIdRCFDg@public.gmane.org>]
* [PATCH 4/7] arm: dts: imx: update snvs to use syscon access register
[not found] ` <1431623933-3473-1-git-send-email-Frank.Li-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
@ 2015-05-14 17:18 ` Frank.Li-KZfg59tc24xl57MIdRCFDg
0 siblings, 0 replies; 8+ messages in thread
From: Frank.Li-KZfg59tc24xl57MIdRCFDg @ 2015-05-14 17:18 UTC (permalink / raw)
To: lznuaa-Re5JQEeQqe8AvxtiuMwx3w, shawn.guo-QSEj5FYQhm4dnm+yROfE0A,
dmitry.torokhov-Re5JQEeQqe8AvxtiuMwx3w,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-input-u79uwXL29TY76Z2rM5mHXA,
rtc-linux-/JYPxA39Uh5TLH3MbocFFw, linux-pm-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA, Frank Li
From: Frank Li <Frank.Li-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
snvs is MFP device. Change dts to use syscon to allocate register resource.
Signed-off-by: Frank Li <Frank.Li-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
---
arch/arm/boot/dts/imx6qdl.dtsi | 12 ++++--------
arch/arm/boot/dts/imx6sl.dtsi | 12 ++++--------
arch/arm/boot/dts/imx6sx.dtsi | 12 ++++--------
arch/arm/boot/dts/vfxxx.dtsi | 9 +++------
4 files changed, 15 insertions(+), 30 deletions(-)
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index 0482a66..6d8161d 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -687,21 +687,17 @@
};
snvs@020cc000 {
- compatible = "fsl,sec-v4.0-mon", "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x020cc000 0x4000>;
+ compatible = "fsl,sec-v4.0-mon", "syscon", "simple-bus";
+ reg = <0x020cc000 0x4000>;
- snvs_rtc: snvs-rtc-lp@34 {
+ snvs_rtc: snvs-rtc-lp {
compatible = "fsl,sec-v4.0-mon-rtc-lp";
- reg = <0x34 0x58>;
interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>,
<0 20 IRQ_TYPE_LEVEL_HIGH>;
};
- snvs_poweroff: snvs-poweroff@38 {
+ snvs_poweroff: snvs-poweroff {
compatible = "fsl,sec-v4.0-poweroff";
- reg = <0x38 0x4>;
status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
index a78e715..2ec9021 100644
--- a/arch/arm/boot/dts/imx6sl.dtsi
+++ b/arch/arm/boot/dts/imx6sl.dtsi
@@ -564,21 +564,17 @@
};
snvs@020cc000 {
- compatible = "fsl,sec-v4.0-mon", "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x020cc000 0x4000>;
+ compatible = "fsl,sec-v4.0-mon", "syscon", "simple-bus";
+ reg = <0x020cc000 0x4000>;
- snvs_rtc: snvs-rtc-lp@34 {
+ snvs_rtc: snvs-rtc-lp {
compatible = "fsl,sec-v4.0-mon-rtc-lp";
- reg = <0x34 0x58>;
interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>,
<0 20 IRQ_TYPE_LEVEL_HIGH>;
};
- snvs_poweroff: snvs-poweroff@38 {
+ snvs_poweroff: snvs-poweroff {
compatible = "fsl,sec-v4.0-poweroff";
- reg = <0x38 0x4>;
status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
index 708175d..7bc5b20 100644
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -662,20 +662,16 @@
};
snvs: snvs@020cc000 {
- compatible = "fsl,sec-v4.0-mon", "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x020cc000 0x4000>;
+ compatible = "fsl,sec-v4.0-mon", "syscon", "simple-bus";
+ reg = <0x020cc000 0x4000>;
- snvs_rtc: snvs-rtc-lp@34 {
+ snvs_rtc: snvs-rtc-lp {
compatible = "fsl,sec-v4.0-mon-rtc-lp";
- reg = <0x34 0x58>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
};
- snvs_poweroff: snvs-poweroff@38 {
+ snvs_poweroff: snvs-poweroff {
compatible = "fsl,sec-v4.0-poweroff";
- reg = <0x38 0x4>;
status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi
index 4aa3351..e038378 100644
--- a/arch/arm/boot/dts/vfxxx.dtsi
+++ b/arch/arm/boot/dts/vfxxx.dtsi
@@ -404,14 +404,11 @@
};
snvs0: snvs@400a7000 {
- compatible = "fsl,sec-v4.0-mon", "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x400a7000 0x2000>;
+ compatible = "fsl,sec-v4.0-mon", "syscon", "simple-bus";
+ reg = <0x400a7000 0x2000>;
- snvsrtc: snvs-rtc-lp@34 {
+ snvsrtc: snvs-rtc-lp {
compatible = "fsl,sec-v4.0-mon-rtc-lp";
- reg = <0x34 0x58>;
interrupts = <100 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_SNVS>;
clock-names = "snvs-rtc";
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH 5/7] input: keyboard: imx: add snvs power key driver
2015-05-14 17:18 [PATCH 0/7] Change snvs rtc and poweroff to use syscon add pwrkey driver Frank.Li-KZfg59tc24xl57MIdRCFDg
` (3 preceding siblings ...)
[not found] ` <1431623933-3473-1-git-send-email-Frank.Li-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
@ 2015-05-14 17:18 ` Frank.Li
2015-05-14 17:18 ` [PATCH 6/7] document: devicetree: input: imx: i.mx snvs power device tree bindings Frank.Li
2015-05-14 17:18 ` [PATCH 7/7] arm: dts: imx6sx: enable snvs power key Frank.Li
6 siblings, 0 replies; 8+ messages in thread
From: Frank.Li @ 2015-05-14 17:18 UTC (permalink / raw)
To: lznuaa, shawn.guo, dmitry.torokhov, robh+dt
Cc: linux-arm-kernel, linux-input, rtc-linux, linux-pm, devicetree,
Robin Gong, Frank Li
From: Robin Gong <b38343@freescale.com>
add snvs power key driver.
It work in imx chips after i.mx6sx
ON/OFF key used power on/off whole system.
This driver make it wakeup from suspend state when short press
ON/OFF key.
Long time press will trig SNVS power off chip without software
intervention.
Signed-off-by: Robin Gong <b38343@freescale.com>
Signed-off-by: Frank Li <Frank.Li@freescale.com>
---
drivers/input/keyboard/Kconfig | 11 ++
drivers/input/keyboard/Makefile | 1 +
drivers/input/keyboard/snvs_pwrkey.c | 232 +++++++++++++++++++++++++++++++++++
3 files changed, 244 insertions(+)
create mode 100644 drivers/input/keyboard/snvs_pwrkey.c
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index 106fbac..61b3fab 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -400,6 +400,17 @@ config KEYBOARD_MPR121
To compile this driver as a module, choose M here: the
module will be called mpr121_touchkey.
+config KEYBOARD_SNVS_PWRKEY
+ tristate "IMX SNVS Power Key Driver"
+ depends on SOC_IMX6SX
+ depends on OF
+ help
+ This is the snvs powerkey driver for the Freescale i.MX application
+ processors that are newer than i.MX6 SX.
+
+ To compile this driver as a module, choose M here; the
+ module will be called snvs_pwrkey.
+
config KEYBOARD_IMX
tristate "IMX keypad support"
depends on ARCH_MXC
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
index df28d55..1d416dd 100644
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
@@ -51,6 +51,7 @@ obj-$(CONFIG_KEYBOARD_QT1070) += qt1070.o
obj-$(CONFIG_KEYBOARD_QT2160) += qt2160.o
obj-$(CONFIG_KEYBOARD_SAMSUNG) += samsung-keypad.o
obj-$(CONFIG_KEYBOARD_SH_KEYSC) += sh_keysc.o
+obj-$(CONFIG_KEYBOARD_SNVS_PWRKEY) += snvs_pwrkey.o
obj-$(CONFIG_KEYBOARD_SPEAR) += spear-keyboard.o
obj-$(CONFIG_KEYBOARD_STMPE) += stmpe-keypad.o
obj-$(CONFIG_KEYBOARD_STOWAWAY) += stowaway.o
diff --git a/drivers/input/keyboard/snvs_pwrkey.c b/drivers/input/keyboard/snvs_pwrkey.c
new file mode 100644
index 0000000..98c340e
--- /dev/null
+++ b/drivers/input/keyboard/snvs_pwrkey.c
@@ -0,0 +1,232 @@
+/*
+ * Driver for the IMX SNVS ON/OFF Power Key
+ * Copyright (C) 2015 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+
+#define SNVS_LPSR_REG 0x4C /* LP Status Register */
+#define SNVS_LPCR_REG 0x38 /* LP Control Register */
+#define SNVS_HPSR_REG 0x14
+#define SNVS_HPSR_BTN BIT(6)
+#define SNVS_LPSR_SPO BIT(18)
+#define SNVS_LPCR_DEP_EN BIT(5)
+
+#define DEBOUNCE_TIME 30
+#define REPEAT_INTERVAL 60
+
+struct pwrkey_drv_data {
+ struct regmap *snvs;
+ int irq;
+ int keycode;
+ int keystate; /* 1:pressed */
+ int wakeup;
+ struct timer_list check_timer;
+ struct input_dev *input;
+};
+
+static void imx_imx_snvs_check_for_events(unsigned long data)
+{
+ struct pwrkey_drv_data *pdata = (struct pwrkey_drv_data *) data;
+ struct input_dev *input = pdata->input;
+ u32 state;
+
+ regmap_read(pdata->snvs, SNVS_HPSR_REG, &state);
+ state = state & SNVS_HPSR_BTN ? 1 : 0;
+
+ /* only report new event if status changed */
+ if (state ^ pdata->keystate) {
+ pdata->keystate = state;
+ input_event(input, EV_KEY, pdata->keycode, state);
+ input_sync(input);
+ pm_relax(pdata->input->dev.parent);
+ }
+
+ /* repeat check if pressed long */
+ if (state) {
+ mod_timer(&pdata->check_timer,
+ jiffies + msecs_to_jiffies(REPEAT_INTERVAL));
+ }
+}
+
+static irqreturn_t imx_snvs_pwrkey_interrupt(int irq, void *dev_id)
+{
+ struct platform_device *pdev = dev_id;
+ struct pwrkey_drv_data *pdata = platform_get_drvdata(pdev);
+ u32 lp_status;
+
+ pm_wakeup_event(pdata->input->dev.parent, 0);
+
+ regmap_read(pdata->snvs, SNVS_LPSR_REG, &lp_status);
+ if (lp_status & SNVS_LPSR_SPO)
+ mod_timer(&pdata->check_timer, jiffies + msecs_to_jiffies(DEBOUNCE_TIME));
+
+ /* clear SPO status */
+ regmap_write(pdata->snvs, SNVS_LPSR_REG, SNVS_LPSR_SPO);
+
+ return IRQ_HANDLED;
+}
+
+static void imx_snvs_pwrkey_act(void *pdata)
+{
+ struct pwrkey_drv_data *pd = pdata;
+
+ del_timer_sync(&pd->check_timer);
+}
+
+static int imx_snvs_pwrkey_probe(struct platform_device *pdev)
+{
+ struct pwrkey_drv_data *pdata = NULL;
+ struct input_dev *input = NULL;
+ struct device_node *np, *snvs_np;
+ int error;
+
+ /* Get SNVS register Page */
+ np = pdev->dev.of_node;
+ if (!np)
+ return -ENODEV;
+
+ pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return -ENOMEM;
+
+ snvs_np = of_get_parent(pdev->dev.of_node);
+ if (!snvs_np)
+ return -ENODEV;
+
+ pdata->snvs = syscon_node_to_regmap(snvs_np);
+ of_node_put(snvs_np);
+
+ if (!pdata->snvs) {
+ pr_err("Can't get snvs syscon\n");
+ return -ENODEV;
+ }
+
+ if (of_property_read_u32(np, "linux,keycode", &pdata->keycode)) {
+ pdata->keycode = KEY_POWER;
+ dev_warn(&pdev->dev, "KEY_POWER without setting in dts\n");
+ }
+
+ pdata->wakeup = of_property_read_bool(np, "wakeup");
+
+ pdata->irq = platform_get_irq(pdev, 0);
+ if (pdata->irq < 0) {
+ dev_err(&pdev->dev, "no irq defined in platform data\n");
+ return -EINVAL;
+ }
+
+ regmap_update_bits(pdata->snvs, SNVS_LPCR_REG, SNVS_LPCR_DEP_EN, SNVS_LPCR_DEP_EN);
+
+ /* clear the unexpected interrupt before driver ready */
+ regmap_write(pdata->snvs, SNVS_LPSR_REG, SNVS_LPSR_SPO);
+
+ setup_timer(&pdata->check_timer,
+ imx_imx_snvs_check_for_events, (unsigned long) pdata);
+
+ input = devm_input_allocate_device(&pdev->dev);
+ if (!input) {
+ dev_err(&pdev->dev, "failed to allocate the input device\n");
+ return -ENOMEM;
+ }
+
+ input->name = pdev->name;
+ input->phys = "snvs-pwrkey/input0";
+ input->id.bustype = BUS_HOST;
+
+ input_set_capability(input, EV_KEY, pdata->keycode);
+
+ /* input customer action to cancel release timer */
+ error = devm_add_action(&pdev->dev, imx_snvs_pwrkey_act, pdata);
+ if (error) {
+ dev_err(&pdev->dev, "failed to register remove action\n");
+ return error;
+ }
+
+ error = devm_request_irq(&pdev->dev, pdata->irq,
+ imx_snvs_pwrkey_interrupt,
+ 0, pdev->name, pdev);
+
+ if (error) {
+ dev_err(&pdev->dev, "interrupt not available.\n");
+ return error;
+ }
+
+ error = input_register_device(input);
+ if (error < 0) {
+ dev_err(&pdev->dev, "failed to register input device\n");
+ input_free_device(input);
+ return error;
+ }
+
+ pdata->input = input;
+ platform_set_drvdata(pdev, pdata);
+
+ device_init_wakeup(&pdev->dev, pdata->wakeup);
+
+ return 0;
+}
+
+static int imx_snvs_pwrkey_suspend(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct pwrkey_drv_data *pdata = platform_get_drvdata(pdev);
+
+ if (device_may_wakeup(&pdev->dev))
+ enable_irq_wake(pdata->irq);
+
+ return 0;
+}
+
+static int imx_snvs_pwrkey_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct pwrkey_drv_data *pdata = platform_get_drvdata(pdev);
+
+ if (device_may_wakeup(&pdev->dev))
+ disable_irq_wake(pdata->irq);
+
+ return 0;
+}
+
+static const struct of_device_id imx_snvs_pwrkey_ids[] = {
+ { .compatible = "fsl,sec-v4.0-pwrkey" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, imx_snvs_pwrkey_ids);
+
+static SIMPLE_DEV_PM_OPS(imx_snvs_pwrkey_pm_ops, imx_snvs_pwrkey_suspend,
+ imx_snvs_pwrkey_resume);
+
+static struct platform_driver imx_snvs_pwrkey_driver = {
+ .driver = {
+ .name = "snvs_pwrkey",
+ .pm = &imx_snvs_pwrkey_pm_ops,
+ .of_match_table = imx_snvs_pwrkey_ids,
+ },
+ .probe = imx_snvs_pwrkey_probe,
+};
+module_platform_driver(imx_snvs_pwrkey_driver);
+
+MODULE_AUTHOR("Freescale Semiconductor");
+MODULE_DESCRIPTION("i.MX snvs power key Driver");
+MODULE_LICENSE("GPL");
--
1.9.1
^ permalink raw reply related [flat|nested] 8+ messages in thread* [PATCH 6/7] document: devicetree: input: imx: i.mx snvs power device tree bindings
2015-05-14 17:18 [PATCH 0/7] Change snvs rtc and poweroff to use syscon add pwrkey driver Frank.Li-KZfg59tc24xl57MIdRCFDg
` (4 preceding siblings ...)
2015-05-14 17:18 ` [PATCH 5/7] input: keyboard: imx: add snvs power key driver Frank.Li
@ 2015-05-14 17:18 ` Frank.Li
2015-05-14 17:18 ` [PATCH 7/7] arm: dts: imx6sx: enable snvs power key Frank.Li
6 siblings, 0 replies; 8+ messages in thread
From: Frank.Li @ 2015-05-14 17:18 UTC (permalink / raw)
To: lznuaa, shawn.guo, dmitry.torokhov, robh+dt
Cc: linux-arm-kernel, linux-input, rtc-linux, linux-pm, devicetree,
Frank Li, Robin Gong
From: Frank Li <Frank.Li@freescale.com>
The snvs-pwrkey is designed to enable POWER key function which controlled
by SNVS ONOFF. the driver can report the status of POWER key and wakeup
system if pressed after system suspend.
Signed-off-by: Frank Li <Frank.Li@freescale.com>
Signed-off-by: Robin Gong <b38343@freescale.com>
---
.../devicetree/bindings/crypto/fsl-sec4.txt | 42 ++++++++++++++++++++++
.../devicetree/bindings/input/snvs-pwrkey.txt | 1 +
2 files changed, 43 insertions(+)
create mode 100644 Documentation/devicetree/bindings/input/snvs-pwrkey.txt
diff --git a/Documentation/devicetree/bindings/crypto/fsl-sec4.txt b/Documentation/devicetree/bindings/crypto/fsl-sec4.txt
index ca04206..99a57b7 100644
--- a/Documentation/devicetree/bindings/crypto/fsl-sec4.txt
+++ b/Documentation/devicetree/bindings/crypto/fsl-sec4.txt
@@ -394,6 +394,41 @@ EXAMPLE
};
=====================================================================
+System ON/OFF key driver
+
+ The snvs-pwrkey is designed to enable POWER key function which controlled
+ by SNVS ONOFF, the driver can report the status of POWER key and wakeup
+ system if pressed after system suspend.
+
+ - compatible:
+ Usage: required
+ Value type: <string>
+ Definition: Mush include "fsl,sec-v4.0-pwrkey".
+
+ - interrupts:
+ Usage: required
+ Value type: <prop_encoded-array>
+ Definition: The SNVS ON/OFF interrupt number to the CPU(s).
+
+ - linux,keycode:
+ Usage: option
+ Value type: <int>
+ Definition: Keycode to emit, KEY_POWER by default.
+
+ - wakeup:
+ Usage: option
+ Value type: <boo>
+ Definition: Button can wake-up the system
+
+EXAMPLE:
+ snvs-pwrkey@0x020cc000 {
+ compatible = "fsl,sec-v4.0-pwrkey";
+ interrupts = <0 4 0x4>
+ linux,keycode = <116>; /* KEY_POWER */
+ wakeup;
+ };
+
+=====================================================================
FULL EXAMPLE
crypto: crypto@300000 {
@@ -475,6 +510,13 @@ FULL EXAMPLE
snvs_poweroff: snvs-poweroff@38 {
compatible = "fsl,sec-v4.0-poweroff";
};
+
+ snvs-pwrkey@0x020cc000 {
+ compatible = "fsl,sec-v4.0-pwrkey";
+ interrupts = <0 4 0x4>;
+ linux,keycode = <116>; /* KEY_POWER */
+ wakeup;
+ };
};
=====================================================================
diff --git a/Documentation/devicetree/bindings/input/snvs-pwrkey.txt b/Documentation/devicetree/bindings/input/snvs-pwrkey.txt
new file mode 100644
index 0000000..70c1425
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/snvs-pwrkey.txt
@@ -0,0 +1 @@
+See Documentation/devicetree/bindings/crypto/fsl-sec4.txt
--
1.9.1
^ permalink raw reply related [flat|nested] 8+ messages in thread* [PATCH 7/7] arm: dts: imx6sx: enable snvs power key
2015-05-14 17:18 [PATCH 0/7] Change snvs rtc and poweroff to use syscon add pwrkey driver Frank.Li-KZfg59tc24xl57MIdRCFDg
` (5 preceding siblings ...)
2015-05-14 17:18 ` [PATCH 6/7] document: devicetree: input: imx: i.mx snvs power device tree bindings Frank.Li
@ 2015-05-14 17:18 ` Frank.Li
6 siblings, 0 replies; 8+ messages in thread
From: Frank.Li @ 2015-05-14 17:18 UTC (permalink / raw)
To: lznuaa, shawn.guo, dmitry.torokhov, robh+dt
Cc: devicetree, Frank Li, rtc-linux, linux-pm, linux-input,
linux-arm-kernel
From: Frank Li <Frank.Li@freescale.com>
enable snvs ONOFF power key support
Signed-off-by: Frank Li <Frank.Li@freescale.com>
---
arch/arm/boot/dts/imx6sx.dtsi | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
index 7bc5b20..24041d7 100644
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -674,6 +674,13 @@
compatible = "fsl,sec-v4.0-poweroff";
status = "disabled";
};
+
+ snvs_pwrkey: snvs-powerkey {
+ compatible = "fsl,sec-v4.0-pwrkey";
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ linux,keycode = <116>; /* KEY_POWER */
+ wakeup;
+ };
};
epit1: epit@020d0000 {
--
1.9.1
^ permalink raw reply related [flat|nested] 8+ messages in thread