From: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
To: Chanwoo Choi <cw00.choi@samsung.com>,
MyungJoo Ham <myungjoo.ham@samsung.com>,
Dmitry Torokhov <dmitry.torokhov@gmail.com>,
Samuel Ortiz <sameo@linux.intel.com>,
Lee Jones <lee.jones@linaro.org>,
Sebastian Reichel <sre@kernel.org>,
Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>,
David Woodhouse <dwmw2@infradead.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>,
linux-kernel@vger.kernel.org, linux-input@vger.kernel.org,
linux-pm@vger.kernel.org
Cc: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
Subject: [PATCH v2 7/9] mfd/extcon: max77843: Rename defines to allow inclusion with max77693
Date: Sun, 24 May 2015 14:43:31 +0900 [thread overview]
Message-ID: <1432446213-4886-8-git-send-email-k.kozlowski.k@gmail.com> (raw)
In-Reply-To: <1432446213-4886-1-git-send-email-k.kozlowski.k@gmail.com>
Add MAX77843_MUIC prefix to some of the defines used in max77843 extcon
driver so the max77693-private.h can be included simultaneously with
max77843-private.h.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
---
drivers/extcon/extcon-max77843.c | 49 +++++++----
include/linux/mfd/max77843-private.h | 154 +++++++++++++++++------------------
2 files changed, 109 insertions(+), 94 deletions(-)
diff --git a/drivers/extcon/extcon-max77843.c b/drivers/extcon/extcon-max77843.c
index 0f5910dcccb7..8a38d4acf026 100644
--- a/drivers/extcon/extcon-max77843.c
+++ b/drivers/extcon/extcon-max77843.c
@@ -206,11 +206,11 @@ static int max77843_muic_set_path(struct max77843_muic_info *info,
if (attached)
ctrl1 = val;
else
- ctrl1 = CONTROL1_SW_OPEN;
+ ctrl1 = MAX77843_MUIC_CONTROL1_SW_OPEN;
ret = regmap_update_bits(max77843->regmap_muic,
MAX77843_MUIC_REG_CONTROL1,
- CONTROL1_COM_SW, ctrl1);
+ MAX77843_MUIC_CONTROL1_COM_SW, ctrl1);
if (ret < 0) {
dev_err(info->dev, "Cannot switch MUIC port\n");
return ret;
@@ -244,7 +244,7 @@ static int max77843_muic_get_cable_type(struct max77843_muic_info *info,
adc = info->status[MAX77843_MUIC_STATUS1] &
MAX77843_MUIC_STATUS1_ADC_MASK;
- adc >>= STATUS1_ADC_SHIFT;
+ adc >>= MAX77843_MUIC_STATUS1_ADC_SHIFT;
switch (group) {
case MAX77843_CABLE_GROUP_ADC:
@@ -310,7 +310,7 @@ static int max77843_muic_get_cable_type(struct max77843_muic_info *info,
/* Get VBVolt register bit */
gnd_type |= (info->status[MAX77843_MUIC_STATUS2] &
MAX77843_MUIC_STATUS2_VBVOLT_MASK);
- gnd_type >>= STATUS2_VBVOLT_SHIFT;
+ gnd_type >>= MAX77843_MUIC_STATUS2_VBVOLT_SHIFT;
/* Offset of GND cable */
gnd_type |= MAX77843_MUIC_GND_USB_HOST;
@@ -339,7 +339,9 @@ static int max77843_muic_adc_gnd_handler(struct max77843_muic_info *info)
switch (gnd_cable_type) {
case MAX77843_MUIC_GND_USB_HOST:
case MAX77843_MUIC_GND_USB_HOST_VB:
- ret = max77843_muic_set_path(info, CONTROL1_SW_USB, attached);
+ ret = max77843_muic_set_path(info,
+ MAX77843_MUIC_CONTROL1_SW_USB,
+ attached);
if (ret < 0)
return ret;
@@ -347,7 +349,9 @@ static int max77843_muic_adc_gnd_handler(struct max77843_muic_info *info)
break;
case MAX77843_MUIC_GND_MHL_VB:
case MAX77843_MUIC_GND_MHL:
- ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
+ ret = max77843_muic_set_path(info,
+ MAX77843_MUIC_CONTROL1_SW_OPEN,
+ attached);
if (ret < 0)
return ret;
@@ -366,7 +370,7 @@ static int max77843_muic_jig_handler(struct max77843_muic_info *info,
int cable_type, bool attached)
{
int ret;
- u8 path = CONTROL1_SW_OPEN;
+ u8 path = MAX77843_MUIC_CONTROL1_SW_OPEN;
dev_dbg(info->dev, "external connector is %s (adc:0x%02x)\n",
attached ? "attached" : "detached", cable_type);
@@ -374,10 +378,10 @@ static int max77843_muic_jig_handler(struct max77843_muic_info *info,
switch (cable_type) {
case MAX77843_MUIC_ADC_FACTORY_MODE_USB_OFF:
case MAX77843_MUIC_ADC_FACTORY_MODE_USB_ON:
- path = CONTROL1_SW_USB;
+ path = MAX77843_MUIC_CONTROL1_SW_USB;
break;
case MAX77843_MUIC_ADC_FACTORY_MODE_UART_OFF:
- path = CONTROL1_SW_UART;
+ path = MAX77843_MUIC_CONTROL1_SW_UART;
break;
default:
return -EINVAL;
@@ -475,14 +479,18 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info)
switch (chg_type) {
case MAX77843_MUIC_CHG_USB:
- ret = max77843_muic_set_path(info, CONTROL1_SW_USB, attached);
+ ret = max77843_muic_set_path(info,
+ MAX77843_MUIC_CONTROL1_SW_USB,
+ attached);
if (ret < 0)
return ret;
extcon_set_cable_state_(info->edev, EXTCON_USB, attached);
break;
case MAX77843_MUIC_CHG_DOWNSTREAM:
- ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
+ ret = max77843_muic_set_path(info,
+ MAX77843_MUIC_CONTROL1_SW_OPEN,
+ attached);
if (ret < 0)
return ret;
@@ -490,14 +498,18 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info)
attached);
break;
case MAX77843_MUIC_CHG_DEDICATED:
- ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
+ ret = max77843_muic_set_path(info,
+ MAX77843_MUIC_CONTROL1_SW_OPEN,
+ attached);
if (ret < 0)
return ret;
extcon_set_cable_state_(info->edev, EXTCON_TA, attached);
break;
case MAX77843_MUIC_CHG_SPECIAL_500MA:
- ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
+ ret = max77843_muic_set_path(info,
+ MAX77843_MUIC_CONTROL1_SW_OPEN,
+ attached);
if (ret < 0)
return ret;
@@ -505,7 +517,9 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info)
attached);
break;
case MAX77843_MUIC_CHG_SPECIAL_1A:
- ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
+ ret = max77843_muic_set_path(info,
+ MAX77843_MUIC_CONTROL1_SW_OPEN,
+ attached);
if (ret < 0)
return ret;
@@ -529,7 +543,8 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info)
"failed to detect %s accessory (chg_type:0x%x)\n",
attached ? "attached" : "detached", chg_type);
- max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
+ max77843_muic_set_path(info, MAX77843_MUIC_CONTROL1_SW_OPEN,
+ attached);
return -EINVAL;
}
@@ -668,7 +683,7 @@ static int max77843_muic_set_debounce_time(struct max77843_muic_info *info,
ret = regmap_update_bits(max77843->regmap_muic,
MAX77843_MUIC_REG_CONTROL4,
MAX77843_MUIC_CONTROL4_ADCDBSET_MASK,
- time << CONTROL4_ADCDBSET_SHIFT);
+ time << MAX77843_MUIC_CONTROL4_ADCDBSET_SHIFT);
if (ret < 0) {
dev_err(info->dev, "Cannot write MUIC regmap\n");
return ret;
@@ -769,7 +784,7 @@ static int max77843_muic_probe(struct platform_device *pdev)
max77843_muic_set_debounce_time(info, MAX77843_DEBOUNCE_TIME_25MS);
/* Set initial path for UART */
- max77843_muic_set_path(info, CONTROL1_SW_UART, true);
+ max77843_muic_set_path(info, MAX77843_MUIC_CONTROL1_SW_UART, true);
/* Check revision number of MUIC device */
ret = regmap_read(max77843->regmap_muic, MAX77843_MUIC_REG_ID, &id);
diff --git a/include/linux/mfd/max77843-private.h b/include/linux/mfd/max77843-private.h
index 0121d9440340..c19303b0ccfd 100644
--- a/include/linux/mfd/max77843-private.h
+++ b/include/linux/mfd/max77843-private.h
@@ -318,62 +318,62 @@ enum max77843_irq_muic {
MAX77843_INTSRCMASK_SYS_MASK | MAX77843_INTSRCMASK_CHGR_MASK)
/* MAX77843 STATUS register*/
-#define STATUS1_ADC_SHIFT 0
-#define STATUS1_ADCERROR_SHIFT 6
-#define STATUS1_ADC1K_SHIFT 7
-#define STATUS2_CHGTYP_SHIFT 0
-#define STATUS2_CHGDETRUN_SHIFT 3
-#define STATUS2_DCDTMR_SHIFT 4
-#define STATUS2_DXOVP_SHIFT 5
-#define STATUS2_VBVOLT_SHIFT 6
-#define STATUS3_VBADC_SHIFT 0
-#define STATUS3_VDNMON_SHIFT 4
-#define STATUS3_DNRES_SHIFT 5
-#define STATUS3_MPNACK_SHIFT 6
-
-#define MAX77843_MUIC_STATUS1_ADC_MASK (0x1f << STATUS1_ADC_SHIFT)
-#define MAX77843_MUIC_STATUS1_ADCERROR_MASK BIT(STATUS1_ADCERROR_SHIFT)
-#define MAX77843_MUIC_STATUS1_ADC1K_MASK BIT(STATUS1_ADC1K_SHIFT)
-#define MAX77843_MUIC_STATUS2_CHGTYP_MASK (0x7 << STATUS2_CHGTYP_SHIFT)
-#define MAX77843_MUIC_STATUS2_CHGDETRUN_MASK BIT(STATUS2_CHGDETRUN_SHIFT)
-#define MAX77843_MUIC_STATUS2_DCDTMR_MASK BIT(STATUS2_DCDTMR_SHIFT)
-#define MAX77843_MUIC_STATUS2_DXOVP_MASK BIT(STATUS2_DXOVP_SHIFT)
-#define MAX77843_MUIC_STATUS2_VBVOLT_MASK BIT(STATUS2_VBVOLT_SHIFT)
-#define MAX77843_MUIC_STATUS3_VBADC_MASK (0xf << STATUS3_VBADC_SHIFT)
-#define MAX77843_MUIC_STATUS3_VDNMON_MASK BIT(STATUS3_VDNMON_SHIFT)
-#define MAX77843_MUIC_STATUS3_DNRES_MASK BIT(STATUS3_DNRES_SHIFT)
-#define MAX77843_MUIC_STATUS3_MPNACK_MASK BIT(STATUS3_MPNACK_SHIFT)
+#define MAX77843_MUIC_STATUS1_ADC_SHIFT 0
+#define MAX77843_MUIC_STATUS1_ADCERROR_SHIFT 6
+#define MAX77843_MUIC_STATUS1_ADC1K_SHIFT 7
+#define MAX77843_MUIC_STATUS2_CHGTYP_SHIFT 0
+#define MAX77843_MUIC_STATUS2_CHGDETRUN_SHIFT 3
+#define MAX77843_MUIC_STATUS2_DCDTMR_SHIFT 4
+#define MAX77843_MUIC_STATUS2_DXOVP_SHIFT 5
+#define MAX77843_MUIC_STATUS2_VBVOLT_SHIFT 6
+#define MAX77843_MUIC_STATUS3_VBADC_SHIFT 0
+#define MAX77843_MUIC_STATUS3_VDNMON_SHIFT 4
+#define MAX77843_MUIC_STATUS3_DNRES_SHIFT 5
+#define MAX77843_MUIC_STATUS3_MPNACK_SHIFT 6
+
+#define MAX77843_MUIC_STATUS1_ADC_MASK (0x1f << MAX77843_MUIC_STATUS1_ADC_SHIFT)
+#define MAX77843_MUIC_STATUS1_ADCERROR_MASK BIT(MAX77843_MUIC_STATUS1_ADCERROR_SHIFT)
+#define MAX77843_MUIC_STATUS1_ADC1K_MASK BIT(MAX77843_MUIC_STATUS1_ADC1K_SHIFT)
+#define MAX77843_MUIC_STATUS2_CHGTYP_MASK (0x7 << MAX77843_MUIC_STATUS2_CHGTYP_SHIFT)
+#define MAX77843_MUIC_STATUS2_CHGDETRUN_MASK BIT(MAX77843_MUIC_STATUS2_CHGDETRUN_SHIFT)
+#define MAX77843_MUIC_STATUS2_DCDTMR_MASK BIT(MAX77843_MUIC_STATUS2_DCDTMR_SHIFT)
+#define MAX77843_MUIC_STATUS2_DXOVP_MASK BIT(MAX77843_MUIC_STATUS2_DXOVP_SHIFT)
+#define MAX77843_MUIC_STATUS2_VBVOLT_MASK BIT(MAX77843_MUIC_STATUS2_VBVOLT_SHIFT)
+#define MAX77843_MUIC_STATUS3_VBADC_MASK (0xf << MAX77843_MUIC_STATUS3_VBADC_SHIFT)
+#define MAX77843_MUIC_STATUS3_VDNMON_MASK BIT(MAX77843_MUIC_STATUS3_VDNMON_SHIFT)
+#define MAX77843_MUIC_STATUS3_DNRES_MASK BIT(MAX77843_MUIC_STATUS3_DNRES_SHIFT)
+#define MAX77843_MUIC_STATUS3_MPNACK_MASK BIT(MAX77843_MUIC_STATUS3_MPNACK_SHIFT)
/* MAX77843 CONTROL register */
-#define CONTROL1_COMP1SW_SHIFT 0
-#define CONTROL1_COMP2SW_SHIFT 3
-#define CONTROL1_IDBEN_SHIFT 7
-#define CONTROL2_LOWPWR_SHIFT 0
-#define CONTROL2_ADCEN_SHIFT 1
-#define CONTROL2_CPEN_SHIFT 2
-#define CONTROL2_ACC_DET_SHIFT 5
-#define CONTROL2_USBCPINT_SHIFT 6
-#define CONTROL2_RCPS_SHIFT 7
-#define CONTROL3_JIGSET_SHIFT 0
-#define CONTROL4_ADCDBSET_SHIFT 0
-#define CONTROL4_USBAUTO_SHIFT 4
-#define CONTROL4_FCTAUTO_SHIFT 5
-#define CONTROL4_ADCMODE_SHIFT 6
-
-#define MAX77843_MUIC_CONTROL1_COMP1SW_MASK (0x7 << CONTROL1_COMP1SW_SHIFT)
-#define MAX77843_MUIC_CONTROL1_COMP2SW_MASK (0x7 << CONTROL1_COMP2SW_SHIFT)
-#define MAX77843_MUIC_CONTROL1_IDBEN_MASK BIT(CONTROL1_IDBEN_SHIFT)
-#define MAX77843_MUIC_CONTROL2_LOWPWR_MASK BIT(CONTROL2_LOWPWR_SHIFT)
-#define MAX77843_MUIC_CONTROL2_ADCEN_MASK BIT(CONTROL2_ADCEN_SHIFT)
-#define MAX77843_MUIC_CONTROL2_CPEN_MASK BIT(CONTROL2_CPEN_SHIFT)
-#define MAX77843_MUIC_CONTROL2_ACC_DET_MASK BIT(CONTROL2_ACC_DET_SHIFT)
-#define MAX77843_MUIC_CONTROL2_USBCPINT_MASK BIT(CONTROL2_USBCPINT_SHIFT)
-#define MAX77843_MUIC_CONTROL2_RCPS_MASK BIT(CONTROL2_RCPS_SHIFT)
-#define MAX77843_MUIC_CONTROL3_JIGSET_MASK (0x3 << CONTROL3_JIGSET_SHIFT)
-#define MAX77843_MUIC_CONTROL4_ADCDBSET_MASK (0x3 << CONTROL4_ADCDBSET_SHIFT)
-#define MAX77843_MUIC_CONTROL4_USBAUTO_MASK BIT(CONTROL4_USBAUTO_SHIFT)
-#define MAX77843_MUIC_CONTROL4_FCTAUTO_MASK BIT(CONTROL4_FCTAUTO_SHIFT)
-#define MAX77843_MUIC_CONTROL4_ADCMODE_MASK (0x3 << CONTROL4_ADCMODE_SHIFT)
+#define MAX77843_MUIC_CONTROL1_COMP1SW_SHIFT 0
+#define MAX77843_MUIC_CONTROL1_COMP2SW_SHIFT 3
+#define MAX77843_MUIC_CONTROL1_IDBEN_SHIFT 7
+#define MAX77843_MUIC_CONTROL2_LOWPWR_SHIFT 0
+#define MAX77843_MUIC_CONTROL2_ADCEN_SHIFT 1
+#define MAX77843_MUIC_CONTROL2_CPEN_SHIFT 2
+#define MAX77843_MUIC_CONTROL2_ACC_DET_SHIFT 5
+#define MAX77843_MUIC_CONTROL2_USBCPINT_SHIFT 6
+#define MAX77843_MUIC_CONTROL2_RCPS_SHIFT 7
+#define MAX77843_MUIC_CONTROL3_JIGSET_SHIFT 0
+#define MAX77843_MUIC_CONTROL4_ADCDBSET_SHIFT 0
+#define MAX77843_MUIC_CONTROL4_USBAUTO_SHIFT 4
+#define MAX77843_MUIC_CONTROL4_FCTAUTO_SHIFT 5
+#define MAX77843_MUIC_CONTROL4_ADCMODE_SHIFT 6
+
+#define MAX77843_MUIC_CONTROL1_COMP1SW_MASK (0x7 << MAX77843_MUIC_CONTROL1_COMP1SW_SHIFT)
+#define MAX77843_MUIC_CONTROL1_COMP2SW_MASK (0x7 << MAX77843_MUIC_CONTROL1_COMP2SW_SHIFT)
+#define MAX77843_MUIC_CONTROL1_IDBEN_MASK BIT(MAX77843_MUIC_CONTROL1_IDBEN_SHIFT)
+#define MAX77843_MUIC_CONTROL2_LOWPWR_MASK BIT(MAX77843_MUIC_CONTROL2_LOWPWR_SHIFT)
+#define MAX77843_MUIC_CONTROL2_ADCEN_MASK BIT(MAX77843_MUIC_CONTROL2_ADCEN_SHIFT)
+#define MAX77843_MUIC_CONTROL2_CPEN_MASK BIT(MAX77843_MUIC_CONTROL2_CPEN_SHIFT)
+#define MAX77843_MUIC_CONTROL2_ACC_DET_MASK BIT(MAX77843_MUIC_CONTROL2_ACC_DET_SHIFT)
+#define MAX77843_MUIC_CONTROL2_USBCPINT_MASK BIT(MAX77843_MUIC_CONTROL2_USBCPINT_SHIFT)
+#define MAX77843_MUIC_CONTROL2_RCPS_MASK BIT(MAX77843_MUIC_CONTROL2_RCPS_SHIFT)
+#define MAX77843_MUIC_CONTROL3_JIGSET_MASK (0x3 << MAX77843_MUIC_CONTROL3_JIGSET_SHIFT)
+#define MAX77843_MUIC_CONTROL4_ADCDBSET_MASK (0x3 << MAX77843_MUIC_CONTROL4_ADCDBSET_SHIFT)
+#define MAX77843_MUIC_CONTROL4_USBAUTO_MASK BIT(MAX77843_MUIC_CONTROL4_USBAUTO_SHIFT)
+#define MAX77843_MUIC_CONTROL4_FCTAUTO_MASK BIT(MAX77843_MUIC_CONTROL4_FCTAUTO_SHIFT)
+#define MAX77843_MUIC_CONTROL4_ADCMODE_MASK (0x3 << MAX77843_MUIC_CONTROL4_ADCMODE_SHIFT)
/* MAX77843 switch port */
#define COM_OPEN 0
@@ -383,38 +383,38 @@ enum max77843_irq_muic {
#define COM_AUX_USB 4
#define COM_AUX_UART 5
-#define CONTROL1_COM_SW \
+#define MAX77843_MUIC_CONTROL1_COM_SW \
((MAX77843_MUIC_CONTROL1_COMP1SW_MASK | \
MAX77843_MUIC_CONTROL1_COMP2SW_MASK))
-#define CONTROL1_SW_OPEN \
- ((COM_OPEN << CONTROL1_COMP1SW_SHIFT | \
- COM_OPEN << CONTROL1_COMP2SW_SHIFT))
-#define CONTROL1_SW_USB \
- ((COM_USB << CONTROL1_COMP1SW_SHIFT | \
- COM_USB << CONTROL1_COMP2SW_SHIFT))
-#define CONTROL1_SW_AUDIO \
- ((COM_AUDIO << CONTROL1_COMP1SW_SHIFT | \
- COM_AUDIO << CONTROL1_COMP2SW_SHIFT))
-#define CONTROL1_SW_UART \
- ((COM_UART << CONTROL1_COMP1SW_SHIFT | \
- COM_UART << CONTROL1_COMP2SW_SHIFT))
-#define CONTROL1_SW_AUX_USB \
- ((COM_AUX_USB << CONTROL1_COMP1SW_SHIFT | \
- COM_AUX_USB << CONTROL1_COMP2SW_SHIFT))
-#define CONTROL1_SW_AUX_UART \
- ((COM_AUX_UART << CONTROL1_COMP1SW_SHIFT | \
- COM_AUX_UART << CONTROL1_COMP2SW_SHIFT))
+#define MAX77843_MUIC_CONTROL1_SW_OPEN \
+ ((COM_OPEN << MAX77843_MUIC_CONTROL1_COMP1SW_SHIFT | \
+ COM_OPEN << MAX77843_MUIC_CONTROL1_COMP2SW_SHIFT))
+#define MAX77843_MUIC_CONTROL1_SW_USB \
+ ((COM_USB << MAX77843_MUIC_CONTROL1_COMP1SW_SHIFT | \
+ COM_USB << MAX77843_MUIC_CONTROL1_COMP2SW_SHIFT))
+#define MAX77843_MUIC_CONTROL1_SW_AUDIO \
+ ((COM_AUDIO << MAX77843_MUIC_CONTROL1_COMP1SW_SHIFT | \
+ COM_AUDIO << MAX77843_MUIC_CONTROL1_COMP2SW_SHIFT))
+#define MAX77843_MUIC_CONTROL1_SW_UART \
+ ((COM_UART << MAX77843_MUIC_CONTROL1_COMP1SW_SHIFT | \
+ COM_UART << MAX77843_MUIC_CONTROL1_COMP2SW_SHIFT))
+#define MAX77843_MUIC_CONTROL1_SW_AUX_USB \
+ ((COM_AUX_USB << MAX77843_MUIC_CONTROL1_COMP1SW_SHIFT | \
+ COM_AUX_USB << MAX77843_MUIC_CONTROL1_COMP2SW_SHIFT))
+#define MAX77843_MUIC_CONTROL1_SW_AUX_UART \
+ ((COM_AUX_UART << MAX77843_MUIC_CONTROL1_COMP1SW_SHIFT | \
+ COM_AUX_UART << MAX77843_MUIC_CONTROL1_COMP2SW_SHIFT))
#define MAX77843_DISABLE 0
#define MAX77843_ENABLE 1
#define CONTROL4_AUTO_DISABLE \
- ((MAX77843_DISABLE << CONTROL4_USBAUTO_SHIFT) | \
- (MAX77843_DISABLE << CONTROL4_FCTAUTO_SHIFT))
+ ((MAX77843_DISABLE << MAX77843_MUIC_CONTROL4_USBAUTO_SHIFT) | \
+ (MAX77843_DISABLE << MAX77843_MUIC_CONTROL4_FCTAUTO_SHIFT))
#define CONTROL4_AUTO_ENABLE \
- ((MAX77843_ENABLE << CONTROL4_USBAUTO_SHIFT) | \
- (MAX77843_ENABLE << CONTROL4_FCTAUTO_SHIFT))
+ ((MAX77843_ENABLE << MAX77843_MUIC_CONTROL4_USBAUTO_SHIFT) | \
+ (MAX77843_ENABLE << MAX77843_MUIC_CONTROL4_FCTAUTO_SHIFT))
/* MAX77843 SAFEOUT LDO Control register */
#define SAFEOUTCTRL_SAFEOUT1_SHIFT 0
--
2.1.4
next prev parent reply other threads:[~2015-05-24 5:43 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-24 5:43 [PATCH v2 0/9] regulator/power/mfd/input/extcon: Merge max77843 into max77693 Krzysztof Kozlowski
2015-05-24 5:43 ` [PATCH v2 1/9] mfd/extcon: max77693: Remove unused extern declarations and max77693_dev members Krzysztof Kozlowski
2015-05-24 5:43 ` [PATCH v2 2/9] mfd: max77693: Store I2C device type as enum and add default unknown Krzysztof Kozlowski
2015-05-27 10:23 ` Lee Jones
2015-05-27 11:13 ` Krzysztof Kozłowski
2015-05-27 12:15 ` Lee Jones
2015-05-27 12:24 ` Lee Jones
2015-05-24 5:43 ` [PATCH v2 3/9] regulator: max77693: Support different register configurations Krzysztof Kozlowski
2015-05-24 5:43 ` [PATCH v2 4/9] extcon/input/mfd/power/regulator: max77693: Move state container to common header Krzysztof Kozlowski
2015-05-26 17:46 ` Dmitry Torokhov
2015-05-27 10:25 ` Lee Jones
2015-05-27 13:55 ` Chanwoo Choi
2015-05-24 5:43 ` [PATCH v2 5/9] extcon/input/mfd/regulator: max77843: Switch to common max77693 state container Krzysztof Kozlowski
2015-05-26 17:46 ` Dmitry Torokhov
2015-05-27 10:25 ` Lee Jones
2015-05-27 13:54 ` Chanwoo Choi
2015-05-24 5:43 ` [PATCH v2 6/9] mfd/extcon: max77693: Rename defines to allow inclusion with max77843 Krzysztof Kozlowski
2015-05-27 10:26 ` Lee Jones
2015-05-27 13:52 ` Chanwoo Choi
2015-05-24 5:43 ` Krzysztof Kozlowski [this message]
2015-05-27 13:50 ` [PATCH v2 7/9] mfd/extcon: max77843: Rename defines to allow inclusion with max77693 Chanwoo Choi
2015-05-27 23:42 ` Krzysztof Kozłowski
2015-05-29 11:06 ` Chanwoo Choi
2015-05-24 5:43 ` [PATCH v2 8/9] regulator: max77693: Add support for MAX77843 device Krzysztof Kozlowski
2015-05-24 5:43 ` [PATCH v2 9/9] regulator: Remove the max77843 driver Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1432446213-4886-8-git-send-email-k.kozlowski.k@gmail.com \
--to=k.kozlowski.k@gmail.com \
--cc=broonie@kernel.org \
--cc=cw00.choi@samsung.com \
--cc=dbaryshkov@gmail.com \
--cc=dmitry.torokhov@gmail.com \
--cc=dwmw2@infradead.org \
--cc=lee.jones@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=myungjoo.ham@samsung.com \
--cc=sameo@linux.intel.com \
--cc=sre@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).