From: Simon Wood <simon@mungewell.org>
To: linux-input@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, Jiri Kosina <jkosina@suse.cz>,
Frank Praznik <frank.praznik@oh.rr.com>,
Simon Wood <simon@mungewell.org>
Subject: [PATCH 4/4] HID: hid-sony: PS Move fix report descriptor
Date: Tue, 9 Jun 2015 21:27:07 -0600 [thread overview]
Message-ID: <1433906827-11146-4-git-send-email-simon@mungewell.org> (raw)
In-Reply-To: <1433906827-11146-1-git-send-email-simon@mungewell.org>
Fix the report descriptor so that the buttons and trigger are correctly reported.
The format of the input report is described here:
https://github.com/nitsch/moveonpc/wiki/Input-report
The Accelerometers and Gyros (1st frame only) are also reported as axis, but
the Magnetometers are NOT as 'fixing' their byte order would break user-space
drivers such as PSMoveAPI.
It is hoped to resolve this at a future time.
Signed-off-by: Simon Wood <simon@mungewell.org>
---
drivers/hid/hid-sony.c | 69 ++++++++++++++++++++++++++++++++------------------
1 file changed, 44 insertions(+), 25 deletions(-)
diff --git a/drivers/hid/hid-sony.c b/drivers/hid/hid-sony.c
index 51cb1ac..2ce0295 100644
--- a/drivers/hid/hid-sony.c
+++ b/drivers/hid/hid-sony.c
@@ -153,52 +153,71 @@ static __u8 motion_rdesc[] = {
0xA1, 0x01, /* Collection (Application), */
0xA1, 0x02, /* Collection (Logical), */
0x85, 0x01, /* Report ID (1), */
- 0x75, 0x08, /* Report Size (8), */
- 0x95, 0x01, /* Report Count (1), */
- 0x15, 0x00, /* Logical Minimum (0), */
- 0x26, 0xFF, 0x00, /* Logical Maximum (255), */
- 0x81, 0x03, /* Input (Constant, Variable), */
0x75, 0x01, /* Report Size (1), */
- 0x95, 0x13, /* Report Count (19), */
+ 0x95, 0x15, /* Report Count (21), */
0x15, 0x00, /* Logical Minimum (0), */
0x25, 0x01, /* Logical Maximum (1), */
0x35, 0x00, /* Physical Minimum (0), */
0x45, 0x01, /* Physical Maximum (1), */
0x05, 0x09, /* Usage Page (Button), */
0x19, 0x01, /* Usage Minimum (01h), */
- 0x29, 0x13, /* Usage Maximum (13h), */
- 0x81, 0x02, /* Input (Variable), */
- 0x75, 0x01, /* Report Size (1), */
- 0x95, 0x0D, /* Report Count (13), */
+ 0x29, 0x15, /* Usage Maximum (15h), */
+ 0x81, 0x02, /* Input (Variable), * Buttons */
+ 0x95, 0x0B, /* Report Count (11), */
0x06, 0x00, 0xFF, /* Usage Page (FF00h), */
- 0x81, 0x03, /* Input (Constant, Variable), */
+ 0x81, 0x03, /* Input (Constant, Variable), * Padding */
0x15, 0x00, /* Logical Minimum (0), */
0x26, 0xFF, 0x00, /* Logical Maximum (255), */
0x05, 0x01, /* Usage Page (Desktop), */
- 0x09, 0x01, /* Usage (Pointer), */
0xA1, 0x00, /* Collection (Physical), */
0x75, 0x08, /* Report Size (8), */
- 0x95, 0x04, /* Report Count (4), */
+ 0x95, 0x01, /* Report Count (1), */
0x35, 0x00, /* Physical Minimum (0), */
0x46, 0xFF, 0x00, /* Physical Maximum (255), */
0x09, 0x30, /* Usage (X), */
- 0x09, 0x31, /* Usage (Y), */
- 0x09, 0x32, /* Usage (Z), */
- 0x09, 0x35, /* Usage (Rz), */
- 0x81, 0x02, /* Input (Variable), */
+ 0x81, 0x02, /* Input (Variable), * Trigger */
0xC0, /* End Collection, */
- 0x05, 0x01, /* Usage Page (Desktop), */
- 0x95, 0x13, /* Report Count (19), */
- 0x09, 0x01, /* Usage (Pointer), */
+ 0x06, 0x00, 0xFF, /* Usage Page (FF00h), */
+ 0x75, 0x08, /* Report Size (8), */
+ 0x95, 0x07, /* Report Count (7), * skip 7 bytes */
0x81, 0x02, /* Input (Variable), */
- 0x95, 0x0C, /* Report Count (12), */
- 0x81, 0x01, /* Input (Constant), */
+ 0x05, 0x01, /* Usage Page (Desktop), */
0x75, 0x10, /* Report Size (16), */
- 0x95, 0x04, /* Report Count (4), */
- 0x26, 0xFF, 0x03, /* Logical Maximum (1023), */
- 0x46, 0xFF, 0x03, /* Physical Maximum (1023), */
+ 0x46, 0xFF, 0xFF, /* Physical Maximum (65535), */
+ 0x27, 0xFF, 0xFF, 0x00, 0x00, /* Logical Maximum (65535), */
+ 0x95, 0x03, /* Report Count (3), * 3x Accels */
+ 0x09, 0x33, /* Usage (rX), */
+ 0x09, 0x34, /* Usage (rY), */
+ 0x09, 0x35, /* Usage (rZ), */
+ 0x81, 0x02, /* Input (Variable), */
+ 0x06, 0x00, 0xFF, /* Usage Page (FF00h), */
+ 0x95, 0x03, /* Report Count (3), * Skip Accels 2nd frame */
+ 0x81, 0x02, /* Input (Variable), */
+ 0x05, 0x01, /* Usage Page (Desktop), */
0x09, 0x01, /* Usage (Pointer), */
+ 0x95, 0x03, /* Report Count (3), * 3x Gyros */
+ 0x81, 0x02, /* Input (Variable), */
+ 0x06, 0x00, 0xFF, /* Usage Page (FF00h), */
+ 0x95, 0x03, /* Report Count (3), * Skip Gyros 2nd frame */
0x81, 0x02, /* Input (Variable), */
+ 0x75, 0x0C, /* Report Size (12), */
+ 0x46, 0xFF, 0x0F, /* Physical Maximum (4095), */
+ 0x26, 0xFF, 0x0F, /* Logical Maximum (4095), */
+ 0x95, 0x04, /* Report Count (4), * Skip Temp and Magnetometers */
+ 0x81, 0x02, /* Input (Variable), */
+ 0x75, 0x08, /* Report Size (8), */
+ 0x46, 0xFF, 0x00, /* Physical Maximum (255), */
+ 0x26, 0xFF, 0x00, /* Logical Maximum (255), */
+ 0x95, 0x06, /* Report Count (6), * Skip Timestamp and Extension Bytes */
+ 0x81, 0x02, /* Input (Variable), */
+ 0x75, 0x08, /* Report Size (8), */
+ 0x95, 0x30, /* Report Count (48), */
+ 0x09, 0x01, /* Usage (Pointer), */
+ 0x91, 0x02, /* Output (Variable), */
+ 0x75, 0x08, /* Report Size (8), */
+ 0x95, 0x30, /* Report Count (48), */
+ 0x09, 0x01, /* Usage (Pointer), */
+ 0xB1, 0x02, /* Feature (Variable), */
0xC0, /* End Collection, */
0xA1, 0x02, /* Collection (Logical), */
0x85, 0x02, /* Report ID (2), */
--
2.1.4
next prev parent reply other threads:[~2015-06-10 3:27 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-10 3:27 [PATCH 1/4] HID: hid-sony: Add quirk for MOTION_CONTROLLER_BT Simon Wood
2015-06-10 3:27 ` [PATCH 2/4] HID_ hid-sony_ Add support PS3 Move Battery via BT Simon Wood
2015-06-10 3:27 ` [PATCH 3/4] HID: hid-sony: PS3 Move enable LEDs and Rumble " Simon Wood
2015-06-10 3:27 ` Simon Wood [this message]
2015-06-12 11:15 ` [PATCH 1/4] HID: hid-sony: Add quirk for MOTION_CONTROLLER_BT Jiri Kosina
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1433906827-11146-4-git-send-email-simon@mungewell.org \
--to=simon@mungewell.org \
--cc=frank.praznik@oh.rr.com \
--cc=jkosina@suse.cz \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).