From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jason Gerecke Subject: [PATCH] HID: wacom: Report correct device resolution when using the wireless adapater Date: Wed, 5 Aug 2015 15:44:53 -0700 Message-ID: <1438814693-12051-1-git-send-email-killertofu@gmail.com> Return-path: Received: from mail-pa0-f50.google.com ([209.85.220.50]:34549 "EHLO mail-pa0-f50.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754405AbbHEWpI (ORCPT ); Wed, 5 Aug 2015 18:45:08 -0400 Received: by pawu10 with SMTP id u10so46335978paw.1 for ; Wed, 05 Aug 2015 15:45:07 -0700 (PDT) Sender: linux-input-owner@vger.kernel.org List-Id: linux-input@vger.kernel.org To: Jiri Kosina , Benjamin Tissoires Cc: linux-input@vger.kernel.org, Ping Cheng , Aaron Skomra , Jason Gerecke , Jason Gerecke The 'wacom_wireless_work' function does not recalculate the tablet's resolution, causing the value contained in the 'features' struct to always be reported to userspace. This value is valid only for the pen interface, meaning that the value will be incorrect for the touchpad (if present). This in particular causes problems for libinput which relies on the reported resolution being correct. This patch adds the necessary calls to recalculate the resolution for each interface. This requires a little bit of code shuffling since both the 'wacom_set_default_phy' and 'wacom_calculate_res' are declared below their new first point of use in 'wacom_wireless_work'. Signed-off-by: Jason Gerecke --- Jiri: Would it be possible to target this patch for 4.2? drivers/hid/wacom_sys.c | 70 ++++++++++++++++++++++++++----------------------- 1 file changed, 37 insertions(+), 33 deletions(-) diff --git a/drivers/hid/wacom_sys.c b/drivers/hid/wacom_sys.c index 4c0ffca..7e064b0 100644 --- a/drivers/hid/wacom_sys.c +++ b/drivers/hid/wacom_sys.c @@ -1282,6 +1282,39 @@ fail_register_pen_input: return error; } +/* + * Not all devices report physical dimensions from HID. + * Compute the default from hardcoded logical dimension + * and resolution before driver overwrites them. + */ +static void wacom_set_default_phy(struct wacom_features *features) +{ + if (features->x_resolution) { + features->x_phy = (features->x_max * 100) / + features->x_resolution; + features->y_phy = (features->y_max * 100) / + features->y_resolution; + } +} + +static void wacom_calculate_res(struct wacom_features *features) +{ + /* set unit to "100th of a mm" for devices not reported by HID */ + if (!features->unit) { + features->unit = 0x11; + features->unitExpo = -3; + } + + features->x_resolution = wacom_calc_hid_res(features->x_max, + features->x_phy, + features->unit, + features->unitExpo); + features->y_resolution = wacom_calc_hid_res(features->y_max, + features->y_phy, + features->unit, + features->unitExpo); +} + static void wacom_wireless_work(struct work_struct *work) { struct wacom *wacom = container_of(work, struct wacom, work); @@ -1339,6 +1372,8 @@ static void wacom_wireless_work(struct work_struct *work) if (wacom_wac1->features.type != INTUOSHT && wacom_wac1->features.type != BAMBOO_PT) wacom_wac1->features.device_type |= WACOM_DEVICETYPE_PAD; + wacom_set_default_phy(&wacom_wac1->features); + wacom_calculate_res(&wacom_wac1->features); snprintf(wacom_wac1->pen_name, WACOM_NAME_MAX, "%s (WL) Pen", wacom_wac1->features.name); snprintf(wacom_wac1->pad_name, WACOM_NAME_MAX, "%s (WL) Pad", @@ -1357,7 +1392,9 @@ static void wacom_wireless_work(struct work_struct *work) wacom_wac2->features = *((struct wacom_features *)id->driver_data); wacom_wac2->features.pktlen = WACOM_PKGLEN_BBTOUCH3; + wacom_set_default_phy(&wacom_wac2->features); wacom_wac2->features.x_max = wacom_wac2->features.y_max = 4096; + wacom_calculate_res(&wacom_wac2->features); snprintf(wacom_wac2->touch_name, WACOM_NAME_MAX, "%s (WL) Finger",wacom_wac2->features.name); snprintf(wacom_wac2->pad_name, WACOM_NAME_MAX, @@ -1405,39 +1442,6 @@ void wacom_battery_work(struct work_struct *work) } } -/* - * Not all devices report physical dimensions from HID. - * Compute the default from hardcoded logical dimension - * and resolution before driver overwrites them. - */ -static void wacom_set_default_phy(struct wacom_features *features) -{ - if (features->x_resolution) { - features->x_phy = (features->x_max * 100) / - features->x_resolution; - features->y_phy = (features->y_max * 100) / - features->y_resolution; - } -} - -static void wacom_calculate_res(struct wacom_features *features) -{ - /* set unit to "100th of a mm" for devices not reported by HID */ - if (!features->unit) { - features->unit = 0x11; - features->unitExpo = -3; - } - - features->x_resolution = wacom_calc_hid_res(features->x_max, - features->x_phy, - features->unit, - features->unitExpo); - features->y_resolution = wacom_calc_hid_res(features->y_max, - features->y_phy, - features->unit, - features->unitExpo); -} - static size_t wacom_compute_pktlen(struct hid_device *hdev) { struct hid_report_enum *report_enum; -- 2.5.0