From: Pavel Rojtberg <rojtberg@gmail.com>
To: linux-input@vger.kernel.org, pgriffais@valvesoftware.com,
dmitry.torokhov@gmail.com, gregkh@linuxfoundation.org
Cc: Pavel Rojtberg <rojtberg@gmail.com>
Subject: [PATCH 04/15] Input: xpad: remove needless bulk out URB used for LED setup
Date: Thu, 1 Oct 2015 22:57:15 +0200 [thread overview]
Message-ID: <1443733046-29610-5-git-send-email-rojtberg@gmail.com> (raw)
In-Reply-To: <1443733046-29610-1-git-send-email-rojtberg@gmail.com>
From: Pavel Rojtberg <rojtberg@gmail.com>
this code was probably wrong ever since and is redundant with
xpad_send_led_command.
Both try to send a similar command to the xbox360 controller. However
xpad_send_led_command correctly uses the pad_nr instead of
bInterfaceNumber to select the led and re-uses the irq_out URB instead
of creating a new one.
Note that this change only affects the two supported wireless
controllers. Tested using the xbox360 wireless controller (PC).
Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com>
---
drivers/input/joystick/xpad.c | 79 +-----------------------------------------------------------------
1 file changed, 1 insertion(+), 78 deletions(-)
diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c
index ab62d47..a379346 100644
--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -329,9 +329,6 @@ struct usb_xpad {
unsigned char *idata; /* input data */
dma_addr_t idata_dma;
- struct urb *bulk_out;
- unsigned char *bdata;
-
struct urb *irq_out; /* urb for interrupt out report */
unsigned char *odata; /* output data */
dma_addr_t odata_dma;
@@ -511,7 +508,6 @@ static void xpad360w_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned cha
if (data[0] & 0x08) {
if (data[1] & 0x80) {
xpad->pad_present = 1;
- usb_submit_urb(xpad->bulk_out, GFP_ATOMIC);
xpad_identify_controller(xpad);
} else
xpad->pad_present = 0;
@@ -669,28 +665,6 @@ exit:
__func__, retval);
}
-static void xpad_bulk_out(struct urb *urb)
-{
- struct usb_xpad *xpad = urb->context;
- struct device *dev = &xpad->intf->dev;
-
- switch (urb->status) {
- case 0:
- /* success */
- break;
- case -ECONNRESET:
- case -ENOENT:
- case -ESHUTDOWN:
- /* this urb is terminated, clean up */
- dev_dbg(dev, "%s - urb shutting down with status: %d\n",
- __func__, urb->status);
- break;
- default:
- dev_dbg(dev, "%s - nonzero urb status received: %d\n",
- __func__, urb->status);
- }
-}
-
static void xpad_irq_out(struct urb *urb)
{
struct usb_xpad *xpad = urb->context;
@@ -1216,52 +1190,6 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
if (xpad->xtype == XTYPE_XBOX360W) {
/*
- * Setup the message to set the LEDs on the
- * controller when it shows up
- */
- xpad->bulk_out = usb_alloc_urb(0, GFP_KERNEL);
- if (!xpad->bulk_out) {
- error = -ENOMEM;
- goto fail7;
- }
-
- xpad->bdata = kzalloc(XPAD_PKT_LEN, GFP_KERNEL);
- if (!xpad->bdata) {
- error = -ENOMEM;
- goto fail8;
- }
-
- xpad->bdata[2] = 0x08;
- switch (intf->cur_altsetting->desc.bInterfaceNumber) {
- case 0:
- xpad->bdata[3] = 0x42;
- break;
- case 2:
- xpad->bdata[3] = 0x43;
- break;
- case 4:
- xpad->bdata[3] = 0x44;
- break;
- case 6:
- xpad->bdata[3] = 0x45;
- }
-
- ep_irq_in = &intf->cur_altsetting->endpoint[1].desc;
- if (usb_endpoint_is_bulk_out(ep_irq_in)) {
- usb_fill_bulk_urb(xpad->bulk_out, udev,
- usb_sndbulkpipe(udev,
- ep_irq_in->bEndpointAddress),
- xpad->bdata, XPAD_PKT_LEN,
- xpad_bulk_out, xpad);
- } else {
- usb_fill_int_urb(xpad->bulk_out, udev,
- usb_sndintpipe(udev,
- ep_irq_in->bEndpointAddress),
- xpad->bdata, XPAD_PKT_LEN,
- xpad_bulk_out, xpad, 0);
- }
-
- /*
* Submit the int URB immediately rather than waiting for open
* because we get status messages from the device whether
* or not any controllers are attached. In fact, it's
@@ -1271,13 +1199,11 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
xpad->irq_in->dev = xpad->udev;
error = usb_submit_urb(xpad->irq_in, GFP_KERNEL);
if (error)
- goto fail9;
+ goto fail7;
}
return 0;
- fail9: kfree(xpad->bdata);
- fail8: usb_free_urb(xpad->bulk_out);
fail7: input_unregister_device(input_dev);
input_dev = NULL;
fail6: xpad_led_disconnect(xpad);
@@ -1301,8 +1227,6 @@ static void xpad_disconnect(struct usb_interface *intf)
xpad_deinit_output(xpad);
if (xpad->xtype == XTYPE_XBOX360W) {
- usb_kill_urb(xpad->bulk_out);
- usb_free_urb(xpad->bulk_out);
usb_kill_urb(xpad->irq_in);
}
@@ -1310,7 +1234,6 @@ static void xpad_disconnect(struct usb_interface *intf)
usb_free_coherent(xpad->udev, XPAD_PKT_LEN,
xpad->idata, xpad->idata_dma);
- kfree(xpad->bdata);
kfree(xpad);
usb_set_intfdata(intf, NULL);
--
1.9.1
next prev parent reply other threads:[~2015-10-01 20:57 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-01 20:57 [PATCH 00/15] Input: xpad: updates Pavel Rojtberg
2015-10-01 20:57 ` [PATCH 01/15] Input: xpad: add Covert Forces edition of the Xbox One controller Pavel Rojtberg
2015-10-10 16:42 ` Dmitry Torokhov
2015-10-01 20:57 ` [PATCH 02/15] Input: xpad: fix Razer Atrox Arcade Stick button mapping Pavel Rojtberg
2015-10-10 16:43 ` Dmitry Torokhov
2015-10-01 20:57 ` [PATCH 03/15] Input: xpad: clarify LED enumeration Pavel Rojtberg
2015-10-10 16:44 ` Dmitry Torokhov
2015-10-01 20:57 ` Pavel Rojtberg [this message]
2015-10-10 16:45 ` [PATCH 04/15] Input: xpad: remove needless bulk out URB used for LED setup Dmitry Torokhov
2015-10-01 20:57 ` [PATCH 05/15] Input: xpad: factor out URB submission in xpad_play_effect Pavel Rojtberg
2015-10-10 16:45 ` Dmitry Torokhov
2015-10-01 20:57 ` [PATCH 06/15] Input: xpad: x360w: report dpad as buttons and axes Pavel Rojtberg
2015-10-10 16:45 ` Dmitry Torokhov
2015-10-01 20:57 ` [PATCH 07/15] Input: xpad: move the input device creation to a new function Pavel Rojtberg
2015-10-10 18:00 ` Dmitry Torokhov
2015-10-15 19:19 ` Pavel Rojtberg
2015-10-17 16:49 ` Dmitry Torokhov
2015-10-17 18:08 ` Pavel Rojtberg
2015-10-01 20:57 ` [PATCH 08/15] Input: xpad: query Wireless controller state at init Pavel Rojtberg
2015-10-01 20:57 ` [PATCH 09/15] Input: xpad: handle "present" and "gone" correctly Pavel Rojtberg
2015-10-10 16:42 ` Dmitry Torokhov
2015-10-01 20:57 ` [PATCH 10/15] Input: xpad: use ida() for finding the pad_nr Pavel Rojtberg
2015-10-01 22:53 ` Pavel Rojtberg
2015-10-10 17:06 ` Dmitry Torokhov
2015-10-01 20:57 ` [PATCH 11/15] Input: xpad: do not submit active URBs Pavel Rojtberg
2015-10-01 20:57 ` [PATCH 12/15] Input: xpad: replace mutex by spinlock Pavel Rojtberg
2015-10-10 18:10 ` Dmitry Torokhov
2015-10-01 20:57 ` [PATCH 13/15] Input: xpad: re-submit pending ff and led requests Pavel Rojtberg
2015-10-01 20:57 ` [PATCH 14/15] Input: xpad: workaround dead irq_out after suspend/ resume Pavel Rojtberg
2015-10-01 20:57 ` [PATCH 15/15] Input: xpad: update Xbox One Force Feedback Support Pavel Rojtberg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1443733046-29610-5-git-send-email-rojtberg@gmail.com \
--to=rojtberg@gmail.com \
--cc=dmitry.torokhov@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-input@vger.kernel.org \
--cc=pgriffais@valvesoftware.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).