linux-input.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Mika Westerberg <mika.westerberg@linux.intel.com>
To: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>,
	Mika Westerberg <mika.westerberg@linux.intel.com>,
	linux-input@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2] HID: multitouch: Fetch feature reports on demand for Win8 devices
Date: Wed,  7 Oct 2015 15:33:43 +0300	[thread overview]
Message-ID: <1444221223-33481-1-git-send-email-mika.westerberg@linux.intel.com> (raw)
In-Reply-To: <alpine.LNX.2.00.1510061606440.2758@pobox.suse.cz>

Some newer Intel Skylake based Dell laptops with Win8 precision touchpad
fail when initial feature reports are fetched from it. Below is an example
output with some additional debug included:

 i2c_hid i2c-DLL0704:01: Fetching the HID descriptor
 i2c_hid i2c-DLL0704:01: __i2c_hid_command: cmd=20 00
 i2c_hid i2c-DLL0704:01: HID Descriptor: 1e 00 00 01 99 02 21 00 24 ...
 ...
 i2c_hid i2c-DLL0704:01: i2c_hid_get_report
 i2c_hid i2c-DLL0704:01: __i2c_hid_command: cmd=22 00 38 02 23 00
 i2c_hid i2c-DLL0704:01: report (len=4): 04 00 08 05
 i2c_hid i2c-DLL0704:01: report id 13
 i2c_hid i2c-DLL0704:01: i2c_hid_get_report
 i2c_hid i2c-DLL0704:01: __i2c_hid_command: cmd=22 00 3d 02 23 00
 i2c_hid i2c-DLL0704:01: failed to retrieve report from device.
 i2c_hid i2c-DLL0704:01: report id 7
 i2c_hid i2c-DLL0704:01: i2c_hid_get_report
 i2c_hid i2c-DLL0704:01: __i2c_hid_command: cmd=22 00 37 02 23 00
 i2c_hid i2c-DLL0704:01: report (len=259): 03 01 07 fc 28 fe 84 40 ...
 i2c_hid i2c-DLL0704:01: report id 4
 i2c_hid i2c-DLL0704:01: i2c_hid_get_report
 i2c_hid i2c-DLL0704:01: __i2c_hid_command: cmd=22 00 34 02 23 00

We manage to fetch few reports but then the touchpad dies:

 i2c_designware i2c_designware.1: i2c_dw_handle_tx_abort: lost arbitration
 i2c_hid i2c-DLL0704:01: failed to retrieve report from device.

it eventually pulls the whole I2C bus low:

 i2c_designware i2c_designware.1: controller timed out
 i2c_hid i2c-DLL0704:01: failed to set a report to device.

Fix this by preventing initial feature report retrieval for Win8 devices.
Instead we fetch reports as needed in mt_feature_mapping(). This prevents
fetching reports which might cause problems with the device in question.

Suggested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
---
Added check for MT_CLS_WIN_8 so that the fix is only done for real Win8
devices.

 drivers/hid/hid-multitouch.c | 45 +++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 44 insertions(+), 1 deletion(-)

diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c
index 661b4fce1a5d..dd64461e5e85 100644
--- a/drivers/hid/hid-multitouch.c
+++ b/drivers/hid/hid-multitouch.c
@@ -309,6 +309,41 @@ static struct attribute_group mt_attribute_group = {
 	.attrs = sysfs_attrs
 };
 
+static void mt_get_feature(struct hid_device *hdev, struct hid_report *report)
+{
+	struct mt_device *td = hid_get_drvdata(hdev);
+	int ret, size = hid_report_len(report);
+	u8 *buf;
+
+	/*
+	 * Only fetch the feature report if initial reports are not already
+	 * been retrieved. Currently this is only done for Windows 8 touch
+	 * devices.
+	 */
+	if (!(hdev->quirks & HID_QUIRK_NO_INIT_REPORTS))
+		return;
+	if (td->mtclass.name != MT_CLS_WIN_8)
+		return;
+
+	buf = hid_alloc_report_buf(report, GFP_KERNEL);
+	if (!buf)
+		return;
+
+	ret = hid_hw_raw_request(hdev, report->id, buf, size,
+				 HID_FEATURE_REPORT, HID_REQ_GET_REPORT);
+	if (ret < 0) {
+		dev_warn(&hdev->dev, "failed to fetch feature %d\n",
+			 report->id);
+	} else {
+		ret = hid_report_raw_event(hdev, HID_FEATURE_REPORT, buf,
+					   size, 0);
+		if (ret)
+			dev_warn(&hdev->dev, "failed to report feature\n");
+	}
+
+	kfree(buf);
+}
+
 static void mt_feature_mapping(struct hid_device *hdev,
 		struct hid_field *field, struct hid_usage *usage)
 {
@@ -327,6 +362,8 @@ static void mt_feature_mapping(struct hid_device *hdev,
 
 		break;
 	case HID_DG_CONTACTMAX:
+		mt_get_feature(hdev, field->report);
+
 		td->maxcontact_report_id = field->report->id;
 		td->maxcontacts = field->value[0];
 		if (!td->maxcontacts &&
@@ -343,6 +380,7 @@ static void mt_feature_mapping(struct hid_device *hdev,
 			break;
 		}
 
+		mt_get_feature(hdev, field->report);
 		if (field->value[usage->usage_index] == MT_BUTTONTYPE_CLICKPAD)
 			td->is_buttonpad = true;
 
@@ -1029,8 +1067,13 @@ static int mt_probe(struct hid_device *hdev, const struct hid_device_id *id)
 		 * reports. Fortunately, the Win8 spec says that all touches
 		 * should be sent during each report, making the initialization
 		 * of input reports unnecessary.
+		 *
+		 * In addition some touchpads do not behave well if we read
+		 * all feature reports from them. Instead we prevent
+		 * initial report fetching and then selectively fetch each
+		 * report we are interested in.
 		 */
-		hdev->quirks |= HID_QUIRK_NO_INIT_INPUT_REPORTS;
+		hdev->quirks |= HID_QUIRK_NO_INIT_REPORTS;
 
 	td = devm_kzalloc(&hdev->dev, sizeof(struct mt_device), GFP_KERNEL);
 	if (!td) {
-- 
2.5.3


  reply	other threads:[~2015-10-07 12:33 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-09-28 14:47 [PATCH] HID: multitouch: Fetch feature reports on demand for Win8 devices Mika Westerberg
2015-09-29  9:04 ` Benjamin Tissoires
2015-09-30  8:45   ` Mika Westerberg
2015-10-06 14:07     ` Jiri Kosina
2015-10-07 12:33       ` Mika Westerberg [this message]
2015-10-07 13:34         ` [PATCH v2] " Benjamin Tissoires
2015-10-07 15:56           ` Seth Forshee
2015-10-08  1:12             ` Andrew Duggan
2015-10-08  9:40               ` Mika Westerberg
2015-10-09  1:10                 ` Andrew Duggan
2015-10-09  8:53                   ` Mika Westerberg
2015-10-09 13:39                     ` Benjamin Tissoires
2015-10-11 22:51         ` Jiri Kosina

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1444221223-33481-1-git-send-email-mika.westerberg@linux.intel.com \
    --to=mika.westerberg@linux.intel.com \
    --cc=benjamin.tissoires@redhat.com \
    --cc=jikos@kernel.org \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).