From: Jason Gerecke <killertofu@gmail.com>
To: linux-input@vger.kernel.org
Cc: Jiri Kosina <jkosina@suse.cz>,
Benjamin Tissoires <benjamin.tissoires@redhat.com>,
Ping Cheng <pinglinux@gmail.com>, Aaron Skomra <skomra@gmail.com>,
Jason Gerecke <killertofu@gmail.com>,
Jason Gerecke <jason.gerecke@wacom.com>,
Clifford Jolly <expiredpopsicle@gmail.com>
Subject: [PATCH v2] HID: wacom: Add support for Cintiq Companion 2
Date: Thu, 8 Oct 2015 11:28:38 -0700 [thread overview]
Message-ID: <1444328918-3157-1-git-send-email-killertofu@gmail.com> (raw)
In-Reply-To: <CADvPr_5M_o46S_Y1qnWSmJVgTVeNaBo77x5fPgYdQhyKYG_gNg@mail.gmail.com>
Adds support for the EMR (pen+pad) and touchscreen devices used by the
Wacom Cintiq Companion 2. This applies both to using the device as a
standalone system, as well as when operating in "Cintiq mode" (where
the EMR/touchscreen are simply exposed as USB devices to the system
its connected to).
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Clifford Jolly <expiredpopsicle@gmail.com>
---
drivers/hid/wacom_sys.c | 2 +-
drivers/hid/wacom_wac.c | 41 ++++++++++++++++++++++++++++++++++++++++-
drivers/hid/wacom_wac.h | 1 +
3 files changed, 42 insertions(+), 2 deletions(-)
diff --git a/drivers/hid/wacom_sys.c b/drivers/hid/wacom_sys.c
index 5f6e48e..2e7a1c7 100644
--- a/drivers/hid/wacom_sys.c
+++ b/drivers/hid/wacom_sys.c
@@ -420,7 +420,7 @@ static int wacom_query_tablet_data(struct hid_device *hdev,
/* MT Tablet PC touch */
return wacom_set_device_mode(hdev, 3, 4, 4);
}
- else if (features->type == WACOM_24HDT || features->type == CINTIQ_HYBRID) {
+ else if (features->type == WACOM_24HDT || features->type == CINTIQ_HYBRID || features->type == CINTIQ_COMPANION_2) {
return wacom_set_device_mode(hdev, 18, 3, 2);
}
else if (features->type == WACOM_27QHDT) {
diff --git a/drivers/hid/wacom_wac.c b/drivers/hid/wacom_wac.c
index 46bd02b..44d4cc3 100644
--- a/drivers/hid/wacom_wac.c
+++ b/drivers/hid/wacom_wac.c
@@ -765,7 +765,7 @@ static void wacom_intuos_general(struct wacom_wac *wacom)
/* general pen packet */
if ((data[1] & 0xb8) == 0xa0) {
t = (data[6] << 2) | ((data[7] >> 6) & 3);
- if (features->type >= INTUOS4S && features->type <= CINTIQ_HYBRID) {
+ if (features->type >= INTUOS4S && features->type <= CINTIQ_COMPANION_2) {
t = (t << 1) | (data[1] & 1);
}
input_report_abs(input, ABS_PRESSURE, t);
@@ -948,6 +948,27 @@ static int wacom_intuos_irq(struct wacom_wac *wacom)
} else {
input_report_abs(input, ABS_MISC, 0);
}
+
+ } else if (features->type == CINTIQ_COMPANION_2) {
+ input_report_key(input, BTN_1, (data[1] & 0x02));
+ input_report_key(input, BTN_2, (data[2] & 0x01));
+ input_report_key(input, BTN_3, (data[2] & 0x02));
+ input_report_key(input, BTN_4, (data[2] & 0x04));
+ input_report_key(input, BTN_5, (data[2] & 0x08));
+ input_report_key(input, BTN_6, (data[1] & 0x04));
+
+ input_report_key(input, BTN_7, (data[2] & 0x10)); /* Right */
+ input_report_key(input, BTN_8, (data[2] & 0x20)); /* Up */
+ input_report_key(input, BTN_9, (data[2] & 0x40)); /* Left */
+ input_report_key(input, BTN_A, (data[2] & 0x80)); /* Down */
+ input_report_key(input, BTN_0, (data[1] & 0x01)); /* Center */
+
+ if (data[4] | (data[3] & 0x01)) {
+ input_report_abs(input, ABS_MISC, PAD_DEVICE_ID);
+ } else {
+ input_report_abs(input, ABS_MISC, 0);
+ }
+
} else if (features->type >= INTUOS5S && features->type <= INTUOSPL) {
int i;
@@ -2290,6 +2311,7 @@ void wacom_wac_irq(struct wacom_wac *wacom_wac, size_t len)
case WACOM_27QHD:
case DTK:
case CINTIQ_HYBRID:
+ case CINTIQ_COMPANION_2:
sync = wacom_intuos_irq(wacom_wac);
break;
@@ -2543,6 +2565,7 @@ int wacom_setup_pen_input_capabilities(struct input_dev *input_dev,
case CINTIQ:
case WACOM_13HD:
case CINTIQ_HYBRID:
+ case CINTIQ_COMPANION_2:
input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0);
input_abs_set_res(input_dev, ABS_Z, 287);
__set_bit(INPUT_PROP_DIRECT, input_dev->propbit);
@@ -2595,6 +2618,12 @@ int wacom_setup_pen_input_capabilities(struct input_dev *input_dev,
__clear_bit(ABS_MISC, input_dev->absbit);
/* fall through */
+ case CINTIQ_COMPANION_2:
+ for (i = 0; i < 10; i++)
+ __set_bit(BTN_0 + i, input_dev->keybit);
+ __set_bit(BTN_A, input_dev->keybit);
+ break;
+
case DTUS:
case DTUSX:
case PL:
@@ -3347,6 +3376,14 @@ static const struct wacom_features wacom_features_0x318 =
static const struct wacom_features wacom_features_0x319 =
{ "Wacom Wireless Bamboo PAD", 4095, 4095, /* Touch */
.type = BAMBOO_PAD, 35, 48, .touch_max = 4 };
+static const struct wacom_features wacom_features_0x325 =
+ { "Wacom ISDv5 325", 59552, 33848, 2047, 63,
+ CINTIQ_COMPANION_2, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES,
+ WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET,
+ .oVid = USB_VENDOR_ID_WACOM, .oPid = 0x326 };
+static const struct wacom_features wacom_features_0x326 = /* Touch */
+ { "Wacom ISDv5 326", .type = HID_GENERIC, .oVid = USB_VENDOR_ID_WACOM,
+ .oPid = 0x325 };
static const struct wacom_features wacom_features_0x323 =
{ "Wacom Intuos P M", 21600, 13500, 1023, 31,
INTUOSHT, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
@@ -3506,6 +3543,8 @@ const struct hid_device_id wacom_ids[] = {
{ USB_DEVICE_WACOM(0x318) },
{ USB_DEVICE_WACOM(0x319) },
{ USB_DEVICE_WACOM(0x323) },
+ { USB_DEVICE_WACOM(0x325) },
+ { USB_DEVICE_WACOM(0x326) },
{ USB_DEVICE_WACOM(0x32A) },
{ USB_DEVICE_WACOM(0x32B) },
{ USB_DEVICE_WACOM(0x32C) },
diff --git a/drivers/hid/wacom_wac.h b/drivers/hid/wacom_wac.h
index 809c03e..5a1ec76 100644
--- a/drivers/hid/wacom_wac.h
+++ b/drivers/hid/wacom_wac.h
@@ -124,6 +124,7 @@ enum {
WACOM_24HD,
WACOM_27QHD,
CINTIQ_HYBRID,
+ CINTIQ_COMPANION_2,
CINTIQ,
WACOM_BEE,
WACOM_13HD,
--
2.6.1
next prev parent reply other threads:[~2015-10-08 18:28 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-07 23:55 [PATCH] HID: wacom: Add support for Cintiq Companion 2 Jason Gerecke
2015-10-08 0:59 ` Bastien Nocera
2015-10-08 2:31 ` Cliff Jolly
2015-10-08 18:28 ` Jason Gerecke [this message]
2015-10-11 23:02 ` [PATCH v2] " Jiri Kosina
2015-10-12 16:23 ` Jason Gerecke
2015-10-13 17:03 ` [PATCH v3] " Jason Gerecke
2015-10-21 9:21 ` Jiri Kosina
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1444328918-3157-1-git-send-email-killertofu@gmail.com \
--to=killertofu@gmail.com \
--cc=benjamin.tissoires@redhat.com \
--cc=expiredpopsicle@gmail.com \
--cc=jason.gerecke@wacom.com \
--cc=jkosina@suse.cz \
--cc=linux-input@vger.kernel.org \
--cc=pinglinux@gmail.com \
--cc=skomra@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).