From: WEN Pingbo <pingbo.wen@linaro.org>
To: dmitry.torokhov@gmail.com, arnd@arndb.de
Cc: y2038@lists.linaro.org, WEN Pingbo <pingbo.wen@linaro.org>,
linux-kernel@vger.kernel.org, linux-input@vger.kernel.org
Subject: [PATCH] hp_sdc: fixed y2038 problem
Date: Sun, 18 Oct 2015 17:44:19 +0800 [thread overview]
Message-ID: <1445161459-26918-1-git-send-email-pingbo.wen@linaro.org> (raw)
Two replacements happened in this patch:
1. using timespec64 to prevent time overflow in 2038
2. using ktime_get_ts64 to avoid wall time issues(leap second, etc)
Signed-off-by: WEN Pingbo <pingbo.wen@linaro.org>
---
drivers/input/serio/hp_sdc.c | 18 +++++++++---------
include/linux/hp_sdc.h | 6 +++---
2 files changed, 12 insertions(+), 12 deletions(-)
diff --git a/drivers/input/serio/hp_sdc.c b/drivers/input/serio/hp_sdc.c
index 852858e..76fb7fa 100644
--- a/drivers/input/serio/hp_sdc.c
+++ b/drivers/input/serio/hp_sdc.c
@@ -193,7 +193,7 @@ static void hp_sdc_take(int irq, void *dev_id, uint8_t status, uint8_t data)
curr->seq[curr->idx++] = status;
curr->seq[curr->idx++] = data;
hp_sdc.rqty -= 2;
- do_gettimeofday(&hp_sdc.rtv);
+ ktime_get_ts64(&hp_sdc.rtv);
if (hp_sdc.rqty <= 0) {
/* All data has been gathered. */
@@ -306,13 +306,13 @@ static void hp_sdc_tasklet(unsigned long foo)
write_lock_irq(&hp_sdc.rtq_lock);
if (hp_sdc.rcurr >= 0) {
- struct timeval tv;
+ struct timespec64 ts64;
- do_gettimeofday(&tv);
- if (tv.tv_sec > hp_sdc.rtv.tv_sec)
- tv.tv_usec += USEC_PER_SEC;
+ ktime_get_ts64(&ts64);
+ if (ts64.tv_sec > hp_sdc.rtv.tv_sec)
+ ts64.tv_nsec += NSEC_PER_SEC;
- if (tv.tv_usec - hp_sdc.rtv.tv_usec > HP_SDC_MAX_REG_DELAY) {
+ if (ts64.tv_nsec - hp_sdc.rtv.tv_nsec > HP_SDC_MAX_REG_DELAY) {
hp_sdc_transaction *curr;
uint8_t tmp;
@@ -321,8 +321,8 @@ static void hp_sdc_tasklet(unsigned long foo)
* we'll need to figure out a way to communicate
* it back to the application. and be less verbose.
*/
- printk(KERN_WARNING PREFIX "read timeout (%ius)!\n",
- (int)(tv.tv_usec - hp_sdc.rtv.tv_usec));
+ printk(KERN_WARNING PREFIX "read timeout (%llins)!\n",
+ (s64)(ts64.tv_nsec - hp_sdc.rtv.tv_nsec));
curr->idx += hp_sdc.rqty;
hp_sdc.rqty = 0;
tmp = curr->seq[curr->actidx];
@@ -551,7 +551,7 @@ unsigned long hp_sdc_put(void)
/* Start a new read */
hp_sdc.rqty = curr->seq[curr->idx];
- do_gettimeofday(&hp_sdc.rtv);
+ ktime_get_ts64(&hp_sdc.rtv);
curr->idx++;
/* Still need to lock here in case of spurious irq. */
write_lock_irq(&hp_sdc.rtq_lock);
diff --git a/include/linux/hp_sdc.h b/include/linux/hp_sdc.h
index d392975..1535640 100644
--- a/include/linux/hp_sdc.h
+++ b/include/linux/hp_sdc.h
@@ -47,9 +47,9 @@
#endif
-/* No 4X status reads take longer than this (in usec).
+/* No 4X status reads take longer than this (in nsec).
*/
-#define HP_SDC_MAX_REG_DELAY 20000
+#define HP_SDC_MAX_REG_DELAY 20000000
typedef void (hp_sdc_irqhook) (int irq, void *dev_id,
uint8_t status, uint8_t data);
@@ -281,7 +281,7 @@ typedef struct {
hp_sdc_transaction *tq[HP_SDC_QUEUE_LEN]; /* All pending read/writes */
int rcurr, rqty; /* Current read transact in process */
- struct timeval rtv; /* Time when current read started */
+ struct timespec64 rtv; /* Time when current read started */
int wcurr; /* Current write transact in process */
int dev_err; /* carries status from registration */
--
1.9.1
_______________________________________________
Y2038 mailing list
Y2038@lists.linaro.org
https://lists.linaro.org/mailman/listinfo/y2038
next reply other threads:[~2015-10-18 9:44 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-18 9:44 WEN Pingbo [this message]
2015-10-19 9:01 ` [Y2038] [PATCH] hp_sdc: fixed y2038 problem Arnd Bergmann
2015-10-21 8:52 ` Pingbo Wen
2015-10-23 8:53 ` [PATCH V2] " WEN Pingbo
2015-10-23 9:25 ` [Y2038] " Arnd Bergmann
2015-10-23 9:31 ` Pingbo Wen
2015-10-23 11:29 ` [PATCH V3] hp_sdc: convert struct timeval to ktime_t WEN Pingbo
2015-10-23 11:45 ` Arnd Bergmann
2015-10-23 12:19 ` Pingbo Wen
2015-10-23 12:34 ` Arnd Bergmann
2015-10-24 4:07 ` [PATCH V4] " WEN Pingbo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1445161459-26918-1-git-send-email-pingbo.wen@linaro.org \
--to=pingbo.wen@linaro.org \
--cc=arnd@arndb.de \
--cc=dmitry.torokhov@gmail.com \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=y2038@lists.linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).