From: Simon Wood <simon@mungewell.org>
To: linux-input@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, "Jiri Kosina" <jkosina@suse.cz>,
Edwin <Edwin@Velds.nl>,
"Michal Malý" <madcatxster@devoid-pointer.net>,
"elias vanderstuyft" <elias.vds@gmail.com>,
"Benjamin Tissoires" <benjamin.tissoires@redhat.com>,
"Simon Wood" <simon@mungewell.org>
Subject: [Patch-V2 3/6] HID: hid-logitech-hidpp: Add basic support for Logitech G920
Date: Thu, 12 Nov 2015 09:25:32 -0700 [thread overview]
Message-ID: <1447345535-2912-4-git-send-email-simon@mungewell.org> (raw)
In-Reply-To: <1447345535-2912-1-git-send-email-simon@mungewell.org>
This patch adds basic support for the Logitech G920 wheel when in HID
mode. This wheel 'speaks' the HID++ protocol, and therefor is driven
with hid-logitech-hidpp.
At this stage the driver only shows that it can communicate with the
wheel by outputting the name discovered over HID++.
The normal HID functions work to give input functionality using
joystick/event interface.
Note: in 'hidpp_probe()' we have to start the hardware to get packets
flowing, the same might apply in future for other devices which don't
use the unifying protocol.
Signed-off-by: Simon Wood <simon@mungewell.org>
---
drivers/hid/hid-core.c | 1 +
drivers/hid/hid-ids.h | 1 +
drivers/hid/hid-logitech-hidpp.c | 71 +++++++++++++++++++++++++++++++---------
3 files changed, 57 insertions(+), 16 deletions(-)
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index c6f7a69..190260c 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1902,6 +1902,7 @@ static const struct hid_device_id hid_have_special_driver[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_RUMBLEPAD) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_RUMBLEPAD2_2) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_G29_WHEEL) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_G920_WHEEL) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_WINGMAN_F3D) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_WINGMAN_FFG ) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_FORCE3D_PRO) },
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index ac1feea..269e758 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -619,6 +619,7 @@
#define USB_DEVICE_ID_LOGITECH_RUMBLEPAD2 0xc218
#define USB_DEVICE_ID_LOGITECH_RUMBLEPAD2_2 0xc219
#define USB_DEVICE_ID_LOGITECH_G29_WHEEL 0xc24f
+#define USB_DEVICE_ID_LOGITECH_G920_WHEEL 0xc262
#define USB_DEVICE_ID_LOGITECH_WINGMAN_F3D 0xc283
#define USB_DEVICE_ID_LOGITECH_FORCE3D_PRO 0xc286
#define USB_DEVICE_ID_LOGITECH_FLIGHT_SYSTEM_G940 0xc287
diff --git a/drivers/hid/hid-logitech-hidpp.c b/drivers/hid/hid-logitech-hidpp.c
index 0f53dc8..699a486 100644
--- a/drivers/hid/hid-logitech-hidpp.c
+++ b/drivers/hid/hid-logitech-hidpp.c
@@ -49,11 +49,13 @@ MODULE_PARM_DESC(disable_tap_to_click,
#define HIDPP_QUIRK_CLASS_WTP BIT(0)
#define HIDPP_QUIRK_CLASS_M560 BIT(1)
#define HIDPP_QUIRK_CLASS_K400 BIT(2)
+#define HIDPP_QUIRK_CLASS_G920 BIT(3)
/* bits 2..20 are reserved for classes */
#define HIDPP_QUIRK_CONNECT_EVENTS BIT(21)
#define HIDPP_QUIRK_WTP_PHYSICAL_BUTTONS BIT(22)
#define HIDPP_QUIRK_NO_HIDINPUT BIT(23)
+#define HIDPP_QUIRK_FORCE_OUTPUT_REPORTS BIT(24)
#define HIDPP_QUIRK_DELAYED_INIT (HIDPP_QUIRK_NO_HIDINPUT | \
HIDPP_QUIRK_CONNECT_EVENTS)
@@ -146,8 +148,11 @@ static void hidpp_connect_event(struct hidpp_device *hidpp_dev);
static int __hidpp_send_report(struct hid_device *hdev,
struct hidpp_report *hidpp_report)
{
+ struct hidpp_device *hidpp = hid_get_drvdata(hdev);
int fields_count, ret;
+ hidpp = hid_get_drvdata(hdev);
+
switch (hidpp_report->report_id) {
case REPORT_ID_HIDPP_SHORT:
fields_count = HIDPP_REPORT_SHORT_LENGTH;
@@ -168,9 +173,13 @@ static int __hidpp_send_report(struct hid_device *hdev,
*/
hidpp_report->device_index = 0xff;
- ret = hid_hw_raw_request(hdev, hidpp_report->report_id,
- (u8 *)hidpp_report, fields_count, HID_OUTPUT_REPORT,
- HID_REQ_SET_REPORT);
+ if (hidpp->quirks & HIDPP_QUIRK_FORCE_OUTPUT_REPORTS) {
+ ret = hid_hw_output_report(hdev, (u8 *)hidpp_report, fields_count);
+ } else {
+ ret = hid_hw_raw_request(hdev, hidpp_report->report_id,
+ (u8 *)hidpp_report, fields_count, HID_OUTPUT_REPORT,
+ HID_REQ_SET_REPORT);
+ }
return ret == fields_count ? 0 : -1;
}
@@ -1430,10 +1439,12 @@ static void hidpp_overwrite_name(struct hid_device *hdev, bool use_unifying)
else
name = hidpp_get_device_name(hidpp);
- if (!name)
+ if (!name) {
hid_err(hdev, "unable to retrieve the name of the device");
- else
+ } else {
+ dbg_hid("HID++: Got name: %s\n", name);
snprintf(hdev->name, sizeof(hdev->name), "%s", name);
+ }
kfree(name);
}
@@ -1596,6 +1607,25 @@ static int hidpp_probe(struct hid_device *hdev, const struct hid_device_id *id)
goto hid_parse_fail;
}
+ if (hidpp->quirks & HIDPP_QUIRK_DELAYED_INIT)
+ connect_mask &= ~HID_CONNECT_HIDINPUT;
+
+ if (hidpp->quirks & HIDPP_QUIRK_CLASS_G920) {
+ ret = hid_hw_start(hdev, connect_mask);
+ if (ret) {
+ hid_err(hdev, "hw start failed\n");
+ goto hid_hw_start_fail;
+ }
+ ret = hid_hw_open(hdev);
+ if (ret < 0) {
+ dev_err(&hdev->dev, "%s:hid_hw_open returned error:%d\n",
+ __func__, ret);
+ hid_hw_stop(hdev);
+ goto hid_hw_start_fail;
+ }
+ }
+
+
/* Allow incoming packets */
hid_device_io_start(hdev);
@@ -1604,8 +1634,7 @@ static int hidpp_probe(struct hid_device *hdev, const struct hid_device_id *id)
if (!connected) {
ret = -ENODEV;
hid_err(hdev, "Device not connected");
- hid_device_io_stop(hdev);
- goto hid_parse_fail;
+ goto hid_hw_open_failed;
}
hid_info(hdev, "HID++ %u.%u device connected.\n",
@@ -1618,19 +1647,18 @@ static int hidpp_probe(struct hid_device *hdev, const struct hid_device_id *id)
if (connected && (hidpp->quirks & HIDPP_QUIRK_CLASS_WTP)) {
ret = wtp_get_config(hidpp);
if (ret)
- goto hid_parse_fail;
+ goto hid_hw_open_failed;
}
/* Block incoming packets */
hid_device_io_stop(hdev);
- if (hidpp->quirks & HIDPP_QUIRK_NO_HIDINPUT)
- connect_mask &= ~HID_CONNECT_HIDINPUT;
-
- ret = hid_hw_start(hdev, connect_mask);
- if (ret) {
- hid_err(hdev, "%s:hid_hw_start returned error\n", __func__);
- goto hid_hw_start_fail;
+ if (!(hidpp->quirks & HIDPP_QUIRK_CLASS_G920)) {
+ ret = hid_hw_start(hdev, connect_mask);
+ if (ret) {
+ hid_err(hdev, "%s:hid_hw_start returned error\n", __func__);
+ goto hid_hw_start_fail;
+ }
}
if (hidpp->quirks & HIDPP_QUIRK_CONNECT_EVENTS) {
@@ -1642,6 +1670,12 @@ static int hidpp_probe(struct hid_device *hdev, const struct hid_device_id *id)
return ret;
+hid_hw_open_failed:
+ hid_device_io_stop(hdev);
+ if (hidpp->quirks & HIDPP_QUIRK_CLASS_G920) {
+ hid_hw_close(hdev);
+ hid_hw_stop(hdev);
+ }
hid_hw_start_fail:
hid_parse_fail:
cancel_work_sync(&hidpp->work);
@@ -1655,9 +1689,11 @@ static void hidpp_remove(struct hid_device *hdev)
{
struct hidpp_device *hidpp = hid_get_drvdata(hdev);
+ if (hidpp->quirks & HIDPP_QUIRK_CLASS_G920)
+ hid_hw_close(hdev);
+ hid_hw_stop(hdev);
cancel_work_sync(&hidpp->work);
mutex_destroy(&hidpp->send_mutex);
- hid_hw_stop(hdev);
}
static const struct hid_device_id hidpp_devices[] = {
@@ -1685,6 +1721,9 @@ static const struct hid_device_id hidpp_devices[] = {
{ HID_DEVICE(BUS_USB, HID_GROUP_LOGITECH_DJ_DEVICE,
USB_VENDOR_ID_LOGITECH, HID_ANY_ID)},
+
+ { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_G920_WHEEL),
+ .driver_data = HIDPP_QUIRK_CLASS_G920 | HIDPP_QUIRK_FORCE_OUTPUT_REPORTS},
{}
};
--
2.1.4
next prev parent reply other threads:[~2015-11-12 16:25 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-12 16:25 [Patch-V2 0/6] HID: Support for the Logitech G920 Wheel Simon Wood
2015-11-12 16:25 ` [Patch-V2 1/6] INPUT: xpad: Add minimal support for " Simon Wood
2015-11-19 13:50 ` Jiri Kosina
2015-11-19 18:31 ` Dmitry Torokhov
2015-11-19 18:35 ` Simon Wood
2015-11-19 23:19 ` Edwin
2015-12-10 1:23 ` Dmitry Torokhov
2015-12-10 1:39 ` Dmitry Torokhov
2015-12-10 17:08 ` Benjamin Tissoires
2015-12-10 18:40 ` Dmitry Torokhov
2016-01-04 9:55 ` Benjamin Tissoires
2016-01-04 12:43 ` madcatxster
[not found] ` <568ad0ae.ea3d320a.6acab.2b84SMTPIN_ADDED_MISSING@mx.google.com>
2016-01-05 1:01 ` Dmitry Torokhov
2016-01-06 14:36 ` Jiri Kosina
2016-01-07 1:47 ` Dmitry Torokhov
2016-01-07 4:25 ` Simon Wood
2016-01-07 22:50 ` Michal Malý
2016-01-07 22:53 ` Dmitry Torokhov
2016-01-07 23:05 ` Michal Malý
2016-01-08 9:11 ` Jiri Kosina
2015-12-13 12:50 ` Elias Vanderstuyft
2015-11-12 16:25 ` [Patch-V2 2/6] HID: hid-logitech-hidpp: Add support for very long packets Simon Wood
2015-11-12 16:25 ` Simon Wood [this message]
2015-11-19 11:18 ` [Patch-V2 3/6] HID: hid-logitech-hidpp: Add basic support for Logitech G920 Benjamin Tissoires
2015-11-12 16:25 ` [Patch-V2 4/6] HID: hid-logitech-hidpp: Add range sysfs " Simon Wood
2015-11-12 16:25 ` [Patch-V2 5/6] HID: Add vendor specific usage pages " Simon Wood
2015-11-12 16:25 ` [Patch-V2 6/6] HID: hid-logitech-hidpp: G920 remove deadzones Simon Wood
2015-11-12 16:32 ` [Patch-V2 0/6] HID: Support for the Logitech G920 Wheel Simon Wood
2015-11-19 10:04 ` Jiri Kosina
2015-11-19 11:23 ` Benjamin Tissoires
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1447345535-2912-4-git-send-email-simon@mungewell.org \
--to=simon@mungewell.org \
--cc=Edwin@Velds.nl \
--cc=benjamin.tissoires@redhat.com \
--cc=elias.vds@gmail.com \
--cc=jkosina@suse.cz \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=madcatxster@devoid-pointer.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).