From: Simon Wood <simon@mungewell.org>
To: linux-input@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, "Jiri Kosina" <jkosina@suse.cz>,
Edwin <Edwin@Velds.nl>,
"Michal Malý" <madcatxster@devoid-pointer.net>,
"elias vanderstuyft" <elias.vds@gmail.com>,
"Benjamin Tissoires" <benjamin.tissoires@redhat.com>,
"Simon Wood" <simon@mungewell.org>
Subject: [Patch-V2 4/6] HID: hid-logitech-hidpp: Add range sysfs for Logitech G920
Date: Thu, 12 Nov 2015 09:25:33 -0700 [thread overview]
Message-ID: <1447345535-2912-5-git-send-email-simon@mungewell.org> (raw)
In-Reply-To: <1447345535-2912-1-git-send-email-simon@mungewell.org>
The G920 can adjust the amount of 'turn' it permits, this patch adds
a sysfs file 'range' to control this.
Signed-off-by: Simon Wood <simon@mungewell.org>
---
drivers/hid/hid-logitech-hidpp.c | 140 ++++++++++++++++++++++++++++++++++++++-
1 file changed, 139 insertions(+), 1 deletion(-)
diff --git a/drivers/hid/hid-logitech-hidpp.c b/drivers/hid/hid-logitech-hidpp.c
index 699a486..80ebd1c 100644
--- a/drivers/hid/hid-logitech-hidpp.c
+++ b/drivers/hid/hid-logitech-hidpp.c
@@ -1295,6 +1295,133 @@ static int k400_connect(struct hid_device *hdev, bool connected)
return k400_disable_tap_to_click(hidpp);
}
+/* ------------------------------------------------------------------------- */
+/* Logitech G920 Driving Force Racing Wheel for Xbox One */
+/* ------------------------------------------------------------------------- */
+
+#define HIDPP_PAGE_G920_FORCE_FEEDBACK 0x8123
+
+/* Using session ID = 1 */
+#define CMD_G920_FORCE_GET_APERTURE 0x51
+#define CMD_G920_FORCE_SET_APERTURE 0x61
+
+struct g920_private_data {
+ u8 force_feature;
+ u16 range;
+};
+
+#define to_hid_device(pdev) container_of(pdev, struct hid_device, dev)
+
+static ssize_t g920_range_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct hid_device *hid = to_hid_device(dev);
+ struct hidpp_device *hidpp = hid_get_drvdata(hid);
+ struct g920_private_data *pdata;
+
+ pdata = hidpp->private_data;
+ if (!pdata) {
+ hid_err(hid, "Private driver data not found!\n");
+ return -EINVAL;
+ }
+
+ return scnprintf(buf, PAGE_SIZE, "%u\n", pdata->range);
+}
+
+static ssize_t g920_range_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct hid_device *hid = to_hid_device(dev);
+ struct hidpp_device *hidpp = hid_get_drvdata(hid);
+ struct g920_private_data *pdata;
+ struct hidpp_report response;
+ u8 params[2];
+ int ret;
+ u16 range = simple_strtoul(buf, NULL, 10);
+
+ pdata = hidpp->private_data;
+ if (!pdata) {
+ hid_err(hid, "Private driver data not found!\n");
+ return -EINVAL;
+ }
+
+ if (range < 180)
+ range = 180;
+ else if (range > 900)
+ range = 900;
+
+ params[0] = range >> 8;
+ params[1] = range & 0x00FF;
+
+ ret = hidpp_send_fap_command_sync(hidpp, pdata->force_feature,
+ CMD_G920_FORCE_SET_APERTURE, params, 2, &response);
+ if (ret)
+ return ret;
+
+ pdata->range = range;
+ return count;
+}
+
+static DEVICE_ATTR(range, S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP | S_IROTH, g920_range_show, g920_range_store);
+
+static int g920_allocate(struct hid_device *hdev)
+{
+ struct hidpp_device *hidpp = hid_get_drvdata(hdev);
+ struct g920_private_data *pdata;
+
+ pdata = devm_kzalloc(&hdev->dev, sizeof(struct g920_private_data),
+ GFP_KERNEL);
+ if (!pdata)
+ return -ENOMEM;
+
+ hidpp->private_data = pdata;
+
+ return 0;
+}
+
+static int g920_get_config(struct hidpp_device *hidpp)
+{
+ struct g920_private_data *pdata = hidpp->private_data;
+ struct hidpp_report response;
+ u8 feature_type;
+ u8 feature_index;
+ int ret;
+
+ pdata = hidpp->private_data;
+ if (!pdata) {
+ hid_err(hidpp->hid_dev, "Private driver data not found!\n");
+ return -EINVAL;
+ }
+
+ /* Find feature and store for later use */
+ ret = hidpp_root_get_feature(hidpp, HIDPP_PAGE_G920_FORCE_FEEDBACK,
+ &feature_index, &feature_type);
+ if (ret)
+ return ret;
+
+ pdata->force_feature = feature_index;
+
+ /* Read current Range */
+ ret = hidpp_send_fap_command_sync(hidpp, feature_index,
+ CMD_G920_FORCE_GET_APERTURE, NULL, 0, &response);
+ if (ret > 0) {
+ hid_err(hidpp->hid_dev, "%s: received protocol error 0x%02x\n",
+ __func__, ret);
+ return -EPROTO;
+ }
+ if (ret)
+ return ret;
+
+ pdata->range = get_unaligned_be16(&response.fap.params[0]);
+
+ /* Create sysfs interface */
+ ret = device_create_file(&(hidpp->hid_dev->dev), &dev_attr_range);
+ if (ret)
+ hid_warn(hidpp->hid_dev, "Unable to create sysfs interface for \"range\", errno %d\n", ret);
+
+ return 0;
+}
+
/* -------------------------------------------------------------------------- */
/* Generic HID++ devices */
/* -------------------------------------------------------------------------- */
@@ -1595,6 +1722,10 @@ static int hidpp_probe(struct hid_device *hdev, const struct hid_device_id *id)
ret = k400_allocate(hdev);
if (ret)
goto allocate_fail;
+ } else if (hidpp->quirks & HIDPP_QUIRK_CLASS_G920) {
+ ret = g920_allocate(hdev);
+ if (ret)
+ goto allocate_fail;
}
INIT_WORK(&hidpp->work, delayed_work_cb);
@@ -1648,6 +1779,10 @@ static int hidpp_probe(struct hid_device *hdev, const struct hid_device_id *id)
ret = wtp_get_config(hidpp);
if (ret)
goto hid_hw_open_failed;
+ } else if (connected && (hidpp->quirks & HIDPP_QUIRK_CLASS_G920)) {
+ ret = g920_get_config(hidpp);
+ if (ret)
+ goto hid_hw_open_failed;
}
/* Block incoming packets */
@@ -1673,6 +1808,7 @@ static int hidpp_probe(struct hid_device *hdev, const struct hid_device_id *id)
hid_hw_open_failed:
hid_device_io_stop(hdev);
if (hidpp->quirks & HIDPP_QUIRK_CLASS_G920) {
+ device_remove_file(&hdev->dev, &dev_attr_range);
hid_hw_close(hdev);
hid_hw_stop(hdev);
}
@@ -1689,8 +1825,10 @@ static void hidpp_remove(struct hid_device *hdev)
{
struct hidpp_device *hidpp = hid_get_drvdata(hdev);
- if (hidpp->quirks & HIDPP_QUIRK_CLASS_G920)
+ if (hidpp->quirks & HIDPP_QUIRK_CLASS_G920) {
+ device_remove_file(&hdev->dev, &dev_attr_range);
hid_hw_close(hdev);
+ }
hid_hw_stop(hdev);
cancel_work_sync(&hidpp->work);
mutex_destroy(&hidpp->send_mutex);
--
2.1.4
next prev parent reply other threads:[~2015-11-12 16:25 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-12 16:25 [Patch-V2 0/6] HID: Support for the Logitech G920 Wheel Simon Wood
2015-11-12 16:25 ` [Patch-V2 1/6] INPUT: xpad: Add minimal support for " Simon Wood
2015-11-19 13:50 ` Jiri Kosina
2015-11-19 18:31 ` Dmitry Torokhov
2015-11-19 18:35 ` Simon Wood
2015-11-19 23:19 ` Edwin
2015-12-10 1:23 ` Dmitry Torokhov
2015-12-10 1:39 ` Dmitry Torokhov
2015-12-10 17:08 ` Benjamin Tissoires
2015-12-10 18:40 ` Dmitry Torokhov
2016-01-04 9:55 ` Benjamin Tissoires
2016-01-04 12:43 ` madcatxster
[not found] ` <568ad0ae.ea3d320a.6acab.2b84SMTPIN_ADDED_MISSING@mx.google.com>
2016-01-05 1:01 ` Dmitry Torokhov
2016-01-06 14:36 ` Jiri Kosina
2016-01-07 1:47 ` Dmitry Torokhov
2016-01-07 4:25 ` Simon Wood
2016-01-07 22:50 ` Michal Malý
2016-01-07 22:53 ` Dmitry Torokhov
2016-01-07 23:05 ` Michal Malý
2016-01-08 9:11 ` Jiri Kosina
2015-12-13 12:50 ` Elias Vanderstuyft
2015-11-12 16:25 ` [Patch-V2 2/6] HID: hid-logitech-hidpp: Add support for very long packets Simon Wood
2015-11-12 16:25 ` [Patch-V2 3/6] HID: hid-logitech-hidpp: Add basic support for Logitech G920 Simon Wood
2015-11-19 11:18 ` Benjamin Tissoires
2015-11-12 16:25 ` Simon Wood [this message]
2015-11-12 16:25 ` [Patch-V2 5/6] HID: Add vendor specific usage pages " Simon Wood
2015-11-12 16:25 ` [Patch-V2 6/6] HID: hid-logitech-hidpp: G920 remove deadzones Simon Wood
2015-11-12 16:32 ` [Patch-V2 0/6] HID: Support for the Logitech G920 Wheel Simon Wood
2015-11-19 10:04 ` Jiri Kosina
2015-11-19 11:23 ` Benjamin Tissoires
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1447345535-2912-5-git-send-email-simon@mungewell.org \
--to=simon@mungewell.org \
--cc=Edwin@Velds.nl \
--cc=benjamin.tissoires@redhat.com \
--cc=elias.vds@gmail.com \
--cc=jkosina@suse.cz \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=madcatxster@devoid-pointer.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).