From mboxrd@z Thu Jan 1 00:00:00 1970 From: Boris Brezillon Subject: [PATCH v4 17/24] backlight: pwm_bl: remove useless call to pwm_set_period Date: Mon, 16 Nov 2015 09:56:40 +0100 Message-ID: <1447664207-24370-18-git-send-email-boris.brezillon@free-electrons.com> References: <1447664207-24370-1-git-send-email-boris.brezillon@free-electrons.com> Reply-To: boris.brezillon-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Return-path: In-Reply-To: <1447664207-24370-1-git-send-email-boris.brezillon-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org> List-Post: , List-Help: , List-Archive: , List-Unsubscribe: , To: Thierry Reding , linux-pwm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org Cc: Mike Turquette , Stephen Boyd , linux-clk-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Mark Brown , Liam Girdwood , Kamil Debski , lm-sensors-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org, Jean Delvare , Guenter Roeck , Dmitry Torokhov , linux-input-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Bryan Wu , Richard Purdie , Jacek Anaszewski , linux-leds-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Maxime Ripard , Chen-Yu Tsai , linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org, Joachim Eastwood , Thomas Petazzoni , Heiko Stuebner , linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, Jingoo Han , Lee Jones linu List-Id: linux-input@vger.kernel.org The PWM period will be set when calling pwm_config. Remove this useless call to pwm_set_period, which might mess up with the initial PWM state once we have added proper support for PWM init state retrieval. Signed-off-by: Boris Brezillon Acked-by: Lee Jones --- drivers/video/backlight/pwm_bl.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c index 54d5a03..5ff2976 100644 --- a/drivers/video/backlight/pwm_bl.c +++ b/drivers/video/backlight/pwm_bl.c @@ -292,12 +292,14 @@ static int pwm_backlight_probe(struct platform_device *pdev) * period, parsed from the DT, in the PWM device. For the non-DT case, * set the period from platform data if it has not already been set * via the PWM lookup table. + * FIXME: This assignment should be dropped as soon as all the boards + * have moved to the PWM lookup table approach. The same goes for the + * pb->period field which should be replaced by + * pwm_get_default_period() calls. */ pb->period = pwm_get_default_period(pb->pwm); - if (!pb->period && (data->pwm_period_ns > 0)) { + if (!pb->period && (data->pwm_period_ns > 0)) pb->period = data->pwm_period_ns; - pwm_set_period(pb->pwm, data->pwm_period_ns); - } pb->lth_brightness = data->lth_brightness * (pb->period / pb->scale); -- 2.1.4