From: Markus Pargmann <mpa@pengutronix.de>
To: Shawn Guo <shawnguo@kernel.org>,
Dmitry Torokhov <dmitry.torokhov@gmail.com>,
Jonathan Cameron <jic23@kernel.org>,
Lee Jones <lee.jones@linaro.org>
Cc: "Denis Carikli" <denis@eukrea.com>,
"Eric Bénard" <eric@eukrea.com>,
"Sascha Hauer" <kernel@pengutronix.de>,
devicetree@vger.kernel.org, linux-input@vger.kernel.org,
linux-iio@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
"Hartmut Knaack" <knaack.h@gmx.de>,
"Fabio Estevam" <festevam@gmail.com>,
"Markus Pargmann" <mpa@pengutronix.de>
Subject: [PATCH v8 0/8] imx25 adc and touchscreen driver
Date: Mon, 16 Nov 2015 13:01:01 +0100 [thread overview]
Message-ID: <1447675269-8831-1-git-send-email-mpa@pengutronix.de> (raw)
Hi,
welcome to the next round of the never ending series ;). The last version v7
was sent roughly 8 months ago. The first version at least 1.5 years ago.
This series adds two drivers for ADC and TSC of the imx25 and a MFD driver to
connect these.
Due to the larger changes in this version I had to remove some of the acks
again.
@Hartmut:
Thanks for your comments. I updated the drivers accordingly.
Changes in v8:
- scale was defined as a shared property of the ADC although the scale can be
different for each ADC channel. v8 fixes that.
- Some smaller modifications of the code style in gcq code.
- Redesign of the regulator handling in the gcq code. The driver does now
handle regulators "vref-ext", "vref-xp" and "vref-yp" as positive voltage
reference. Also the calculation of the scale property based on these
voltage reference regulators was fixed. The code now uses
regulator_get_optional() to avoid dummy regulators.
- The missing regulator_disable() was added.
Thanks to Jürgen the time behavior of the units is now fixed and within specs:
- Fixed clock rates for the whole unit regarding to the reference manual.
- Fixed clock/time calculations for settling times in the touchscreen driver.
Best Regards,
Markus
Denis Carikli (2):
ARM: dts: imx25: Add TSC and ADC support
ARM: imx_v4_v5_defconfig: Add I.MX25 Touchscreen controller and ADC
support.
Markus Pargmann (6):
ARM: dt: Binding documentation for imx25 ADC/TSC
ARM: dt: Binding documentation for imx25 GCQ
ARM: dt: Binding documentation for imx25 touchscreen controller
mfd: fsl imx25 Touchscreen ADC driver
iio: adc: fsl,imx25-gcq driver
input: touchscreen: imx25 tcq driver
.../devicetree/bindings/iio/adc/fsl,imx25-gcq.txt | 58 ++
.../bindings/input/touchscreen/fsl-mx25-tcq.txt | 29 +
.../devicetree/bindings/mfd/fsl-imx25-tsadc.txt | 46 ++
arch/arm/boot/dts/imx25.dtsi | 30 +-
arch/arm/configs/imx_v4_v5_defconfig | 4 +
drivers/iio/adc/Kconfig | 7 +
drivers/iio/adc/Makefile | 1 +
drivers/iio/adc/fsl-imx25-gcq.c | 415 ++++++++++++++
drivers/input/touchscreen/Kconfig | 6 +
drivers/input/touchscreen/Makefile | 1 +
drivers/input/touchscreen/fsl-imx25-tcq.c | 600 +++++++++++++++++++++
drivers/mfd/Kconfig | 9 +
drivers/mfd/Makefile | 2 +
drivers/mfd/fsl-imx25-tsadc.c | 204 +++++++
include/dt-bindings/iio/adc/fsl-imx25-gcq.h | 18 +
include/linux/mfd/imx25-tsadc.h | 140 +++++
16 files changed, 1567 insertions(+), 3 deletions(-)
create mode 100644 Documentation/devicetree/bindings/iio/adc/fsl,imx25-gcq.txt
create mode 100644 Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt
create mode 100644 Documentation/devicetree/bindings/mfd/fsl-imx25-tsadc.txt
create mode 100644 drivers/iio/adc/fsl-imx25-gcq.c
create mode 100644 drivers/input/touchscreen/fsl-imx25-tcq.c
create mode 100644 drivers/mfd/fsl-imx25-tsadc.c
create mode 100644 include/dt-bindings/iio/adc/fsl-imx25-gcq.h
create mode 100644 include/linux/mfd/imx25-tsadc.h
--
2.6.1
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2015-11-16 12:01 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-16 12:01 Markus Pargmann [this message]
2015-11-16 12:01 ` [PATCH v8 1/8] ARM: dt: Binding documentation for imx25 ADC/TSC Markus Pargmann
[not found] ` <1447675269-8831-2-git-send-email-mpa-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2015-11-16 14:01 ` Rob Herring
2015-11-23 14:59 ` Lee Jones
2015-11-24 10:44 ` Markus Pargmann
2015-11-16 12:01 ` [PATCH v8 2/8] ARM: dt: Binding documentation for imx25 GCQ Markus Pargmann
2015-11-16 15:12 ` Rob Herring
2015-11-17 7:46 ` Markus Pargmann
2015-11-16 12:01 ` [PATCH v8 3/8] ARM: dt: Binding documentation for imx25 touchscreen controller Markus Pargmann
2015-11-16 14:16 ` Rob Herring
2015-11-17 8:54 ` Markus Pargmann
2015-11-17 18:21 ` Dmitry Torokhov
2015-11-16 12:01 ` [PATCH v8 4/8] mfd: fsl imx25 Touchscreen ADC driver Markus Pargmann
2015-11-21 17:02 ` Jonathan Cameron
[not found] ` <5650A3AA.5080705-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
2015-11-21 17:26 ` Jonathan Cameron
2015-11-23 9:17 ` Markus Pargmann
[not found] ` <1447675269-8831-1-git-send-email-mpa-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2015-11-16 12:01 ` [PATCH v8 5/8] iio: adc: fsl,imx25-gcq driver Markus Pargmann
2015-11-16 12:01 ` [PATCH v8 6/8] input: touchscreen: imx25 tcq driver Markus Pargmann
[not found] ` <1447675269-8831-7-git-send-email-mpa-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2015-11-17 18:17 ` Dmitry Torokhov
2015-11-20 13:33 ` Markus Pargmann
2015-11-21 17:48 ` Jonathan Cameron
2015-11-21 17:50 ` Jonathan Cameron
[not found] ` <5650AE5A.5010506-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
2015-11-23 8:21 ` Juergen Borleis
2015-11-23 13:43 ` Markus Pargmann
2015-11-16 12:01 ` [PATCH v8 8/8] ARM: imx_v4_v5_defconfig: Add I.MX25 Touchscreen controller and ADC support Markus Pargmann
2015-11-16 12:01 ` [PATCH v8 7/8] ARM: dts: imx25: Add TSC " Markus Pargmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1447675269-8831-1-git-send-email-mpa@pengutronix.de \
--to=mpa@pengutronix.de \
--cc=denis@eukrea.com \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.torokhov@gmail.com \
--cc=eric@eukrea.com \
--cc=festevam@gmail.com \
--cc=jic23@kernel.org \
--cc=kernel@pengutronix.de \
--cc=knaack.h@gmx.de \
--cc=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).