[PATCH 0/7] Various touchscreens: Support axis inversion / swapping / extra gpios

[PATCH 0/7] Various touchscreens: Support axis inversion / swapping / extra gpios

[Hans de Goede]

Hi Dimtry and Maxime,

This patch-set extends the of_touchscreen.c helpers to (optionally) also
deal with axis inversion / swapping, and patches a bunch of drivers to use
this new functionality.

One of the modified drivers is the pixcir_i2c_ts driver. Sander Vermin
has been helping me with getting this driver to work on a tablet I own.
This patch-set includes a v2 of Sander's "Input: pixcir_i2c_ts: add wake
and enable gpios" patch. v1 also included axis inversion / swapping support,
which I've redone using the new helpers in a separate patch in this set.

Dmitry can you pickup patches 1-5 please ?
Maxime can you pickup patches 6-7 please ? Merging them seperately
should not be an issue without patches 1-5 the touchscreen will not work
but there will be no other breakage, so no regressions.

Thanks & Regards,

Hans

[PATCH 1/7] of_touchscreen-helpers: Add support for inverted / swapped axis

[Hans de Goede]

Extend touchscreen_parse_properties() with support for the
touchscreen-inverted-x/y and touchscreen-swapped-x-y properties and
add a touchscreen_apply_prop_to_x_y() helper function for adjusting
x and y coordinates to take these properties into account.

This commit also modifies the existing callers of
touchscreen_parse_properties() to pass in NULL for the new third
argument, keeping the existing behavior.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 drivers/input/touchscreen/edt-ft5x06.c     |  2 +-
 drivers/input/touchscreen/of_touchscreen.c | 56 +++++++++++++++++++++++++++++-
 drivers/input/touchscreen/pixcir_i2c_ts.c  |  2 +-
 drivers/input/touchscreen/tsc200x-core.c   |  2 +-
 include/linux/input/touchscreen.h          | 16 ++++++++-
 5 files changed, 73 insertions(+), 5 deletions(-)

diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c
index 0b0f8c1..a97b54a 100644
--- a/drivers/input/touchscreen/edt-ft5x06.c
+++ b/drivers/input/touchscreen/edt-ft5x06.c
@@ -966,7 +966,7 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client,
 	input_set_abs_params(input, ABS_MT_POSITION_Y,
 			     0, tsdata->num_y * 64 - 1, 0, 0);
 
-	touchscreen_parse_properties(input, true);
+	touchscreen_parse_properties(input, true, NULL);
 
 	error = input_mt_init_slots(input, tsdata->max_support_points,
 				INPUT_MT_DIRECT);
diff --git a/drivers/input/touchscreen/of_touchscreen.c b/drivers/input/touchscreen/of_touchscreen.c
index bb6f2fe..6fd9872 100644
--- a/drivers/input/touchscreen/of_touchscreen.c
+++ b/drivers/input/touchscreen/of_touchscreen.c
@@ -55,12 +55,16 @@ static void touchscreen_set_params(struct input_dev *dev,
  * @input: input device that should be parsed
  * @multitouch: specifies whether parsed properties should be applied to
  *	single-touch or multi-touch axes
+ * @prop: pointer to a struct touchscreen_properties into which to store
+ *	axis swap and invert info for use with touchscreen_report_x_y();
+ *	or NULL
  *
  * This function parses common DT properties for touchscreens and setups the
  * input device accordingly. The function keeps previously set up default
  * values if no value is specified via DT.
  */
-void touchscreen_parse_properties(struct input_dev *input, bool multitouch)
+void touchscreen_parse_properties(struct input_dev *input, bool multitouch,
+				  struct touchscreen_properties *prop)
 {
 	struct device *dev = input->dev.parent;
 	unsigned int axis;
@@ -104,5 +108,55 @@ void touchscreen_parse_properties(struct input_dev *input, bool multitouch)
 						&fuzz);
 	if (data_present)
 		touchscreen_set_params(input, axis, maximum, fuzz);
+
+	if (!prop)
+		return;
+
+	axis = multitouch ? ABS_MT_POSITION_X : ABS_X;
+
+	prop->max_x = input_abs_get_max(input, axis);
+	prop->max_y = input_abs_get_max(input, axis + 1);
+	prop->invert_x =
+		device_property_read_bool(dev, "touchscreen-inverted-x");
+	prop->invert_y =
+		device_property_read_bool(dev, "touchscreen-inverted-y");
+	prop->swap_x_y =
+		device_property_read_bool(dev, "touchscreen-swapped-x-y");
+
+	if (prop->swap_x_y) {
+		struct input_absinfo tmp_absinfo;
+
+		tmp_absinfo = input->absinfo[axis];
+		input->absinfo[axis] = input->absinfo[axis + 1];
+		input->absinfo[axis + 1] = tmp_absinfo;
+	}
 }
 EXPORT_SYMBOL(touchscreen_parse_properties);
+
+/**
+ * touchscreen_apply_prop_to_x_y - Adjust abs x and y coordinates
+ * @prop: pointer to a struct touchscreen_properties
+ * @x: X coordinate to apply inversion and swapping to
+ * @y: Y coordinate to apply inversion and swapping to
+ *
+ * Adjust the passed in x and y values applying any axis inversion and
+ * swapping requested in the passed in touchscreen_properties.
+ */
+void touchscreen_apply_prop_to_x_y(struct touchscreen_properties *prop,
+				   s16 *x, s16 *y)
+{
+	if (prop->invert_x)
+		*x = prop->max_x - *x;
+
+	if (prop->invert_y)
+		*y = prop->max_y - *y;
+
+	if (prop->swap_x_y) {
+		s16 tmp;
+
+		tmp = *x;
+		*x = *y;
+		*y = tmp;
+	}
+}
+EXPORT_SYMBOL(touchscreen_apply_prop_to_x_y);
diff --git a/drivers/input/touchscreen/pixcir_i2c_ts.c b/drivers/input/touchscreen/pixcir_i2c_ts.c
index 4b961ad..211408c 100644
--- a/drivers/input/touchscreen/pixcir_i2c_ts.c
+++ b/drivers/input/touchscreen/pixcir_i2c_ts.c
@@ -495,7 +495,7 @@ static int pixcir_i2c_ts_probe(struct i2c_client *client,
 	} else {
 		input_set_capability(input, EV_ABS, ABS_MT_POSITION_X);
 		input_set_capability(input, EV_ABS, ABS_MT_POSITION_Y);
-		touchscreen_parse_properties(input, true);
+		touchscreen_parse_properties(input, true, NULL);
 		if (!input_abs_get_max(input, ABS_MT_POSITION_X) ||
 		    !input_abs_get_max(input, ABS_MT_POSITION_Y)) {
 			dev_err(dev, "Touchscreen size is not specified\n");
diff --git a/drivers/input/touchscreen/tsc200x-core.c b/drivers/input/touchscreen/tsc200x-core.c
index 15240c1..26e81d1 100644
--- a/drivers/input/touchscreen/tsc200x-core.c
+++ b/drivers/input/touchscreen/tsc200x-core.c
@@ -559,7 +559,7 @@ int tsc200x_probe(struct device *dev, int irq, __u16 bustype,
 	input_set_abs_params(input_dev, ABS_PRESSURE, 0, max_p, fudge_p, 0);
 
 	if (np)
-		touchscreen_parse_properties(input_dev, false);
+		touchscreen_parse_properties(input_dev, false, NULL);
 
 	input_dev->open = tsc200x_open;
 	input_dev->close = tsc200x_close;
diff --git a/include/linux/input/touchscreen.h b/include/linux/input/touchscreen.h
index c91e137..9e6ba20 100644
--- a/include/linux/input/touchscreen.h
+++ b/include/linux/input/touchscreen.h
@@ -9,8 +9,22 @@
 #ifndef _TOUCHSCREEN_H
 #define _TOUCHSCREEN_H
 
+#include <asm/types.h>
+
 struct input_dev;
 
-void touchscreen_parse_properties(struct input_dev *dev, bool multitouch);
+struct touchscreen_properties {
+	s32 max_x;
+	s32 max_y;
+	bool invert_x;
+	bool invert_y;
+	bool swap_x_y;
+};
+
+void touchscreen_parse_properties(struct input_dev *input, bool multitouch,
+				  struct touchscreen_properties *prop);
+
+void touchscreen_apply_prop_to_x_y(struct touchscreen_properties *prop,
+				   s16 *x, s16 *y);
 
 #endif
-- 
2.5.0

[PATCH 2/7] touchscreen: ft5x06: Add support for axis inversion / swapping

[Hans de Goede]

Add support for axis inversion / swapping using the new
touchscreen_parse_properties and touchscreen_apply_prop_to_x_y
functionality.

Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
---
 drivers/input/touchscreen/edt-ft5x06.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c
index a97b54a..6fe8d51 100644
--- a/drivers/input/touchscreen/edt-ft5x06.c
+++ b/drivers/input/touchscreen/edt-ft5x06.c
@@ -86,6 +86,7 @@ struct edt_reg_addr {
 struct edt_ft5x06_ts_data {
 	struct i2c_client *client;
 	struct input_dev *input;
+	struct touchscreen_properties prop;
 	u16 num_x;
 	u16 num_y;
 
@@ -173,7 +174,8 @@ static irqreturn_t edt_ft5x06_ts_isr(int irq, void *dev_id)
 	struct device *dev = &tsdata->client->dev;
 	u8 cmd;
 	u8 rdbuf[63];
-	int i, type, x, y, id;
+	s16 x, y;
+	int i, type, id;
 	int offset, tplen, datalen, crclen;
 	int error;
 
@@ -246,6 +248,7 @@ static irqreturn_t edt_ft5x06_ts_isr(int irq, void *dev_id)
 		if (!down)
 			continue;
 
+		touchscreen_apply_prop_to_x_y(&tsdata->prop, &x, &y);
 		input_report_abs(tsdata->input, ABS_MT_POSITION_X, x);
 		input_report_abs(tsdata->input, ABS_MT_POSITION_Y, y);
 	}
@@ -966,7 +969,7 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client,
 	input_set_abs_params(input, ABS_MT_POSITION_Y,
 			     0, tsdata->num_y * 64 - 1, 0, 0);
 
-	touchscreen_parse_properties(input, true, NULL);
+	touchscreen_parse_properties(input, true, &tsdata->prop);
 
 	error = input_mt_init_slots(input, tsdata->max_support_points,
 				INPUT_MT_DIRECT);
-- 
2.5.0

[PATCH 3/7] touchscreen: icn8318: Use parse_properties and apply_prop_to_x_y helpers

[Hans de Goede]

Use the touchscreen_parse_properties and touchscreen_apply_prop_to_x_y
functions, instead of DIY code, this results in a nice cleanup.

Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
---
 drivers/input/touchscreen/chipone_icn8318.c | 56 +++++++----------------------
 1 file changed, 12 insertions(+), 44 deletions(-)

diff --git a/drivers/input/touchscreen/chipone_icn8318.c b/drivers/input/touchscreen/chipone_icn8318.c
index 22a6fea..d0ffeba 100644
--- a/drivers/input/touchscreen/chipone_icn8318.c
+++ b/drivers/input/touchscreen/chipone_icn8318.c
@@ -17,6 +17,7 @@
 #include <linux/i2c.h>
 #include <linux/input.h>
 #include <linux/input/mt.h>
+#include <linux/input/touchscreen.h>
 #include <linux/module.h>
 #include <linux/of.h>
 
@@ -52,11 +53,7 @@ struct icn8318_data {
 	struct i2c_client *client;
 	struct input_dev *input;
 	struct gpio_desc *wake_gpio;
-	u32 max_x;
-	u32 max_y;
-	bool invert_x;
-	bool invert_y;
-	bool swap_x_y;
+	struct touchscreen_properties prop;
 };
 
 static int icn8318_read_touch_data(struct i2c_client *client,
@@ -91,7 +88,8 @@ static irqreturn_t icn8318_irq(int irq, void *dev_id)
 	struct icn8318_data *data = dev_id;
 	struct device *dev = &data->client->dev;
 	struct icn8318_touch_data touch_data;
-	int i, ret, x, y;
+	int i, ret;
+	s16 x, y;
 
 	ret = icn8318_read_touch_data(data->client, &touch_data);
 	if (ret < 0) {
@@ -127,19 +125,9 @@ static irqreturn_t icn8318_irq(int irq, void *dev_id)
 		x = be16_to_cpu(touch->x);
 		y = be16_to_cpu(touch->y);
 
-		if (data->invert_x)
-			x = data->max_x - x;
-
-		if (data->invert_y)
-			y = data->max_y - y;
-
-		if (!data->swap_x_y) {
-			input_event(data->input, EV_ABS, ABS_MT_POSITION_X, x);
-			input_event(data->input, EV_ABS, ABS_MT_POSITION_Y, y);
-		} else {
-			input_event(data->input, EV_ABS, ABS_MT_POSITION_X, y);
-			input_event(data->input, EV_ABS, ABS_MT_POSITION_Y, x);
-		}
+		touchscreen_apply_prop_to_x_y(&data->prop, &x, &y);
+		input_event(data->input, EV_ABS, ABS_MT_POSITION_X, x);
+		input_event(data->input, EV_ABS, ABS_MT_POSITION_Y, y);
 	}
 
 	input_mt_sync_frame(data->input);
@@ -200,10 +188,8 @@ static int icn8318_probe(struct i2c_client *client,
 			 const struct i2c_device_id *id)
 {
 	struct device *dev = &client->dev;
-	struct device_node *np = dev->of_node;
 	struct icn8318_data *data;
 	struct input_dev *input;
-	u32 fuzz_x = 0, fuzz_y = 0;
 	int error;
 
 	if (!client->irq) {
@@ -223,19 +209,6 @@ static int icn8318_probe(struct i2c_client *client,
 		return error;
 	}
 
-	if (of_property_read_u32(np, "touchscreen-size-x", &data->max_x) ||
-	    of_property_read_u32(np, "touchscreen-size-y", &data->max_y)) {
-		dev_err(dev, "Error touchscreen-size-x and/or -y missing\n");
-		return -EINVAL;
-	}
-
-	/* Optional */
-	of_property_read_u32(np, "touchscreen-fuzz-x", &fuzz_x);
-	of_property_read_u32(np, "touchscreen-fuzz-y", &fuzz_y);
-	data->invert_x = of_property_read_bool(np, "touchscreen-inverted-x");
-	data->invert_y = of_property_read_bool(np, "touchscreen-inverted-y");
-	data->swap_x_y = of_property_read_bool(np, "touchscreen-swapped-x-y");
-
 	input = devm_input_allocate_device(dev);
 	if (!input)
 		return -ENOMEM;
@@ -246,16 +219,11 @@ static int icn8318_probe(struct i2c_client *client,
 	input->close = icn8318_stop;
 	input->dev.parent = dev;
 
-	if (!data->swap_x_y) {
-		input_set_abs_params(input, ABS_MT_POSITION_X, 0,
-				     data->max_x, fuzz_x, 0);
-		input_set_abs_params(input, ABS_MT_POSITION_Y, 0,
-				     data->max_y, fuzz_y, 0);
-	} else {
-		input_set_abs_params(input, ABS_MT_POSITION_X, 0,
-				     data->max_y, fuzz_y, 0);
-		input_set_abs_params(input, ABS_MT_POSITION_Y, 0,
-				     data->max_x, fuzz_x, 0);
+	touchscreen_parse_properties(input, true, &data->prop);
+	if (!input_abs_get_max(input, ABS_MT_POSITION_X) ||
+	    !input_abs_get_max(input, ABS_MT_POSITION_Y)) {
+		dev_err(dev, "Error touchscreen-size-x and/or -y missing\n");
+		return -EINVAL;
 	}
 
 	error = input_mt_init_slots(input, ICN8318_MAX_TOUCHES,
-- 
2.5.0

[PATCH 4/7] touchscreen: pixcir_i2c: Add support for wake and enable gpios

[Hans de Goede]

From: Sander Vermin <sander-wENMetUwf8VmR6Xm/wNWPw@public.gmane.org>

On some devices the wake and enable pins of the pixcir touchscreen
controller are connected to gpios and these must be controlled by the
driver for the device to operate properly.

Signed-off-by: Sander Vermin <sander-wENMetUwf8VmR6Xm/wNWPw@public.gmane.org>
Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
---
Changes in v2 (Hans de Goede):
-Split the changes for dealing with inverted / swapped axis out into a
 separate patch
-Remove a bunch of dev_info calls to make the driver less chatty
-Use devm_gpiod_get_optional as these new gpios are optional
-Only msleep after setting enable high if we have an enable pin
---
 .../bindings/input/touchscreen/pixcir_i2c_ts.txt   |  2 +
 drivers/input/touchscreen/pixcir_i2c_ts.c          | 46 ++++++++++++++++++++++
 2 files changed, 48 insertions(+)

diff --git a/Documentation/devicetree/bindings/input/touchscreen/pixcir_i2c_ts.txt b/Documentation/devicetree/bindings/input/touchscreen/pixcir_i2c_ts.txt
index 8eb240a..72ca5ec 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/pixcir_i2c_ts.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/pixcir_i2c_ts.txt
@@ -10,6 +10,8 @@ Required properties:
 
 Optional properties:
 - reset-gpio: GPIO connected to the RESET line of the chip
+- enable-gpios: GPIO connected to the ENABLE line of the chip
+- wake-gpios: GPIO connected to the WAKE line of the chip
 
 Example:
 
diff --git a/drivers/input/touchscreen/pixcir_i2c_ts.c b/drivers/input/touchscreen/pixcir_i2c_ts.c
index 211408c..b75ef65 100644
--- a/drivers/input/touchscreen/pixcir_i2c_ts.c
+++ b/drivers/input/touchscreen/pixcir_i2c_ts.c
@@ -38,6 +38,8 @@ struct pixcir_i2c_ts_data {
 	struct input_dev *input;
 	struct gpio_desc *gpio_attb;
 	struct gpio_desc *gpio_reset;
+	struct gpio_desc *gpio_enable;
+	struct gpio_desc *gpio_wake;
 	const struct pixcir_i2c_chip_data *chip;
 	int max_fingers;	/* Max fingers supported in this instance */
 	bool running;
@@ -208,6 +210,11 @@ static int pixcir_set_power_mode(struct pixcir_i2c_ts_data *ts,
 	struct device *dev = &ts->client->dev;
 	int ret;
 
+	if (mode == PIXCIR_POWER_ACTIVE || mode == PIXCIR_POWER_IDLE) {
+		if (!IS_ERR_OR_NULL(ts->gpio_wake))
+			gpiod_set_value_cansleep(ts->gpio_wake, 1);
+	}
+
 	ret = i2c_smbus_read_byte_data(ts->client, PIXCIR_REG_POWER_MODE);
 	if (ret < 0) {
 		dev_err(dev, "%s: can't read reg 0x%x : %d\n",
@@ -228,6 +235,11 @@ static int pixcir_set_power_mode(struct pixcir_i2c_ts_data *ts,
 		return ret;
 	}
 
+	if (mode == PIXCIR_POWER_HALT) {
+		if (!IS_ERR_OR_NULL(ts->gpio_wake))
+			gpiod_set_value_cansleep(ts->gpio_wake, 0);
+	}
+
 	return 0;
 }
 
@@ -302,6 +314,11 @@ static int pixcir_start(struct pixcir_i2c_ts_data *ts)
 	struct device *dev = &ts->client->dev;
 	int error;
 
+	if (!IS_ERR_OR_NULL(ts->gpio_enable)) {
+		gpiod_set_value_cansleep(ts->gpio_enable, 1);
+		msleep(100);
+	}
+
 	/* LEVEL_TOUCH interrupt with active low polarity */
 	error = pixcir_set_int_mode(ts, PIXCIR_INT_LEVEL_TOUCH, 0);
 	if (error) {
@@ -343,6 +360,9 @@ static int pixcir_stop(struct pixcir_i2c_ts_data *ts)
 	/* Wait till running ISR is complete */
 	synchronize_irq(ts->client->irq);
 
+	if (!IS_ERR_OR_NULL(ts->gpio_enable))
+		gpiod_set_value_cansleep(ts->gpio_enable, 0);
+
 	return 0;
 }
 
@@ -534,6 +554,24 @@ static int pixcir_i2c_ts_probe(struct i2c_client *client,
 		return error;
 	}
 
+	tsdata->gpio_wake = devm_gpiod_get_optional(dev, "wake",
+						    GPIOD_OUT_HIGH);
+	if (IS_ERR(tsdata->gpio_wake)) {
+		error = PTR_ERR(tsdata->gpio_wake);
+		if (error != -EPROBE_DEFER)
+			dev_err(dev, "Failed to get wake gpio: %d\n", error);
+		return error;
+	}
+
+	tsdata->gpio_enable = devm_gpiod_get_optional(dev, "enable",
+						      GPIOD_OUT_HIGH);
+	if (IS_ERR(tsdata->gpio_enable)) {
+		error = PTR_ERR(tsdata->gpio_enable);
+		if (error != -EPROBE_DEFER)
+			dev_err(dev, "Failed to get enable gpio: %d\n", error);
+		return error;
+	}
+
 	error = devm_request_threaded_irq(dev, client->irq, NULL, pixcir_ts_isr,
 					  IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
 					  client->name, tsdata);
@@ -542,6 +580,14 @@ static int pixcir_i2c_ts_probe(struct i2c_client *client,
 		return error;
 	}
 
+	if (!IS_ERR_OR_NULL(tsdata->gpio_wake))
+		gpiod_set_value_cansleep(tsdata->gpio_wake, 1);
+
+	if (!IS_ERR_OR_NULL(tsdata->gpio_enable)) {
+		gpiod_set_value_cansleep(tsdata->gpio_enable, 1);
+		msleep(100);
+	}
+
 	pixcir_reset(tsdata);
 
 	/* Always be in IDLE mode to save power, device supports auto wake */
-- 
2.5.0

[PATCH 5/7] touchscreen: pixcir_ts: Add support for axis inversion / swapping

[Hans de Goede]

Add support for axis inversion / swapping using the new
touchscreen_parse_properties and touchscreen_apply_prop_to_x_y
functionality.

Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
---
 drivers/input/touchscreen/pixcir_i2c_ts.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/input/touchscreen/pixcir_i2c_ts.c b/drivers/input/touchscreen/pixcir_i2c_ts.c
index b75ef65..e310154 100644
--- a/drivers/input/touchscreen/pixcir_i2c_ts.c
+++ b/drivers/input/touchscreen/pixcir_i2c_ts.c
@@ -41,13 +41,14 @@ struct pixcir_i2c_ts_data {
 	struct gpio_desc *gpio_enable;
 	struct gpio_desc *gpio_wake;
 	const struct pixcir_i2c_chip_data *chip;
+	struct touchscreen_properties prop;
 	int max_fingers;	/* Max fingers supported in this instance */
 	bool running;
 };
 
 struct pixcir_touch {
-	int x;
-	int y;
+	s16 x;
+	s16 y;
 	int id;
 };
 
@@ -100,6 +101,8 @@ static void pixcir_ts_parse(struct pixcir_i2c_ts_data *tsdata,
 	for (i = 0; i < touch; i++) {
 		report->touches[i].x = (bufptr[1] << 8) | bufptr[0];
 		report->touches[i].y = (bufptr[3] << 8) | bufptr[2];
+		touchscreen_apply_prop_to_x_y(&report->touches[i].x,
+					      &report->touches[i].y);
 
 		if (chip->has_hw_ids) {
 			report->touches[i].id = bufptr[4];
@@ -515,7 +518,7 @@ static int pixcir_i2c_ts_probe(struct i2c_client *client,
 	} else {
 		input_set_capability(input, EV_ABS, ABS_MT_POSITION_X);
 		input_set_capability(input, EV_ABS, ABS_MT_POSITION_Y);
-		touchscreen_parse_properties(input, true, NULL);
+		touchscreen_parse_properties(input, true, &tsdata->prop);
 		if (!input_abs_get_max(input, ABS_MT_POSITION_X) ||
 		    !input_abs_get_max(input, ABS_MT_POSITION_Y)) {
 			dev_err(dev, "Touchscreen size is not specified\n");
-- 
2.5.0

[PATCH 6/7] ARM: dts: sun4i: Add touchscreen node to iNet1 tablet

[Hans de Goede]

Add a node describing the touchscreen controller used on the iNet1 tablet.

Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
---
 arch/arm/boot/dts/sun4i-a10-inet1.dts | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/arch/arm/boot/dts/sun4i-a10-inet1.dts b/arch/arm/boot/dts/sun4i-a10-inet1.dts
index 487ce63..703d756 100644
--- a/arch/arm/boot/dts/sun4i-a10-inet1.dts
+++ b/arch/arm/boot/dts/sun4i-a10-inet1.dts
@@ -104,6 +104,19 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c2_pins_a>;
 	status = "okay";
+
+	ft5x: touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchscreen_wake_pin>;
+		wake-gpios = <&pio 1 13 GPIO_ACTIVE_HIGH>; /* PB13 */
+		touchscreen-size-x = <600>;
+		touchscreen-size-y = <1024>;
+		touchscreen-swapped-x-y;
+	};
 };
 
 &lradc {
@@ -151,6 +164,13 @@
 };
 
 &pio {
+	touchscreen_wake_pin: touchscreen_wake_pin@0 {
+		allwinner,pins = "PB13";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
 	usb0_id_detect_pin: usb0_id_detect_pin@0 {
 		allwinner,pins = "PH4";
 		allwinner,function = "gpio_in";
-- 
2.5.0

[PATCH 7/7] ARM: dts: sun4i: Add touchscreen node to pov protab2-ips9 tablet

[Hans de Goede]

Add a node describing the touchscreen found on the pov protab2-ips9
tablet.

Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
---
 arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts b/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts
index 82e69c3..0e5124f 100644
--- a/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts
+++ b/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts
@@ -93,6 +93,22 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c2_pins_a>;
 	status = "okay";
+
+	pixcir_ts@5c {
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchscreen_pins>;
+		compatible = "pixcir,pixcir_tangoc";
+		reg = <0x5c>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>; /* EINT21 (PH21) */
+		attb-gpio = <&pio 7 21 GPIO_ACTIVE_HIGH>; /* PH21 */
+		enable-gpios = <&pio 0 5 GPIO_ACTIVE_LOW>;
+		wake-gpios = <&pio 1 13 GPIO_ACTIVE_LOW>;
+		touchscreen-size-x = <1024>;
+		touchscreen-size-y = <768>;
+		touchscreen-inverted-x;
+		touchscreen-inverted-y;
+	};
 };
 
 &lradc {
@@ -129,6 +145,13 @@
 };
 
 &pio {
+	touchscreen_pins: touchscreen_pins@0 {
+		allwinner,pins = "PA5", "PB13";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
 	usb0_id_detect_pin: usb0_id_detect_pin@0 {
 		allwinner,pins = "PH4";
 		allwinner,function = "gpio_in";
-- 
2.5.0

Re: [PATCH 0/7] Various touchscreens: Support axis inversion / swapping / extra gpios

[Russell King - ARM Linux]

On Fri, Nov 20, 2015 at 12:17:06PM +0100, Hans de Goede wrote:
> This patch-set extends the of_touchscreen.c helpers to (optionally) also
> deal with axis inversion / swapping, and patches a bunch of drivers to use
> this new functionality.

What's wrong with using tslib?  tslib supports axis transformations in
userspace via a set of filters.

-- 
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.

Re: [PATCH 0/7] Various touchscreens: Support axis inversion / swapping / extra gpios

[Hans de Goede]

Hi,

On 20-11-15 12:22, Russell King - ARM Linux wrote:
> On Fri, Nov 20, 2015 at 12:17:06PM +0100, Hans de Goede wrote:
>> This patch-set extends the of_touchscreen.c helpers to (optionally) also
>> deal with axis inversion / swapping, and patches a bunch of drivers to use
>> this new functionality.
>
> What's wrong with using tslib?  tslib supports axis transformations in
> userspace via a set of filters.

Doing this in the kernel when we know that the touchscreen is always
mounted upside down (or rotated 90 degress) on a certain tablet makes things
just work, where as tslib requires manual configuration by the user.

Also most distributions are not even shipping tslib, some of this can be
done with the xf86-input-evdev driver (which is the upstream xorg default
driver for touchscreens) too, but again requires manual configuration and
the same goes for the new libinput stack to which xorg is moving and which
is the default for wayland.

Also note that this patch-set is not adding new functionality. We already
have devicetree-bindings to indicate to the driver that axis inversion /
swapping should be done in the driver, and these are already used in
various drivers. This patch-set just makes it easier to add support for
these already existing (and documented) devicetree properties.

Regards,

Hans

Re: [PATCH 4/7] touchscreen: pixcir_i2c: Add support for wake and enable gpios

[Rob Herring]

On Fri, Nov 20, 2015 at 12:17:10PM +0100, Hans de Goede wrote:
> From: Sander Vermin <sander@vermin.nl>
> 
> On some devices the wake and enable pins of the pixcir touchscreen
> controller are connected to gpios and these must be controlled by the
> driver for the device to operate properly.
> 
> Signed-off-by: Sander Vermin <sander@vermin.nl>
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> ---
> Changes in v2 (Hans de Goede):
> -Split the changes for dealing with inverted / swapped axis out into a
>  separate patch
> -Remove a bunch of dev_info calls to make the driver less chatty
> -Use devm_gpiod_get_optional as these new gpios are optional
> -Only msleep after setting enable high if we have an enable pin
> ---
>  .../bindings/input/touchscreen/pixcir_i2c_ts.txt   |  2 +

For the binding:

Acked-by: Rob Herring <robh@kernel.org>

>  drivers/input/touchscreen/pixcir_i2c_ts.c          | 46 ++++++++++++++++++++++
>  2 files changed, 48 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/input/touchscreen/pixcir_i2c_ts.txt b/Documentation/devicetree/bindings/input/touchscreen/pixcir_i2c_ts.txt
> index 8eb240a..72ca5ec 100644
> --- a/Documentation/devicetree/bindings/input/touchscreen/pixcir_i2c_ts.txt
> +++ b/Documentation/devicetree/bindings/input/touchscreen/pixcir_i2c_ts.txt
> @@ -10,6 +10,8 @@ Required properties:
>  
>  Optional properties:
>  - reset-gpio: GPIO connected to the RESET line of the chip
> +- enable-gpios: GPIO connected to the ENABLE line of the chip
> +- wake-gpios: GPIO connected to the WAKE line of the chip
>  
>  Example:
>  
> diff --git a/drivers/input/touchscreen/pixcir_i2c_ts.c b/drivers/input/touchscreen/pixcir_i2c_ts.c
> index 211408c..b75ef65 100644
> --- a/drivers/input/touchscreen/pixcir_i2c_ts.c
> +++ b/drivers/input/touchscreen/pixcir_i2c_ts.c
> @@ -38,6 +38,8 @@ struct pixcir_i2c_ts_data {
>  	struct input_dev *input;
>  	struct gpio_desc *gpio_attb;
>  	struct gpio_desc *gpio_reset;
> +	struct gpio_desc *gpio_enable;
> +	struct gpio_desc *gpio_wake;
>  	const struct pixcir_i2c_chip_data *chip;
>  	int max_fingers;	/* Max fingers supported in this instance */
>  	bool running;
> @@ -208,6 +210,11 @@ static int pixcir_set_power_mode(struct pixcir_i2c_ts_data *ts,
>  	struct device *dev = &ts->client->dev;
>  	int ret;
>  
> +	if (mode == PIXCIR_POWER_ACTIVE || mode == PIXCIR_POWER_IDLE) {
> +		if (!IS_ERR_OR_NULL(ts->gpio_wake))
> +			gpiod_set_value_cansleep(ts->gpio_wake, 1);
> +	}
> +
>  	ret = i2c_smbus_read_byte_data(ts->client, PIXCIR_REG_POWER_MODE);
>  	if (ret < 0) {
>  		dev_err(dev, "%s: can't read reg 0x%x : %d\n",
> @@ -228,6 +235,11 @@ static int pixcir_set_power_mode(struct pixcir_i2c_ts_data *ts,
>  		return ret;
>  	}
>  
> +	if (mode == PIXCIR_POWER_HALT) {
> +		if (!IS_ERR_OR_NULL(ts->gpio_wake))
> +			gpiod_set_value_cansleep(ts->gpio_wake, 0);
> +	}
> +
>  	return 0;
>  }
>  
> @@ -302,6 +314,11 @@ static int pixcir_start(struct pixcir_i2c_ts_data *ts)
>  	struct device *dev = &ts->client->dev;
>  	int error;
>  
> +	if (!IS_ERR_OR_NULL(ts->gpio_enable)) {
> +		gpiod_set_value_cansleep(ts->gpio_enable, 1);
> +		msleep(100);
> +	}
> +
>  	/* LEVEL_TOUCH interrupt with active low polarity */
>  	error = pixcir_set_int_mode(ts, PIXCIR_INT_LEVEL_TOUCH, 0);
>  	if (error) {
> @@ -343,6 +360,9 @@ static int pixcir_stop(struct pixcir_i2c_ts_data *ts)
>  	/* Wait till running ISR is complete */
>  	synchronize_irq(ts->client->irq);
>  
> +	if (!IS_ERR_OR_NULL(ts->gpio_enable))
> +		gpiod_set_value_cansleep(ts->gpio_enable, 0);
> +
>  	return 0;
>  }
>  
> @@ -534,6 +554,24 @@ static int pixcir_i2c_ts_probe(struct i2c_client *client,
>  		return error;
>  	}
>  
> +	tsdata->gpio_wake = devm_gpiod_get_optional(dev, "wake",
> +						    GPIOD_OUT_HIGH);
> +	if (IS_ERR(tsdata->gpio_wake)) {
> +		error = PTR_ERR(tsdata->gpio_wake);
> +		if (error != -EPROBE_DEFER)
> +			dev_err(dev, "Failed to get wake gpio: %d\n", error);
> +		return error;
> +	}
> +
> +	tsdata->gpio_enable = devm_gpiod_get_optional(dev, "enable",
> +						      GPIOD_OUT_HIGH);
> +	if (IS_ERR(tsdata->gpio_enable)) {
> +		error = PTR_ERR(tsdata->gpio_enable);
> +		if (error != -EPROBE_DEFER)
> +			dev_err(dev, "Failed to get enable gpio: %d\n", error);
> +		return error;
> +	}
> +
>  	error = devm_request_threaded_irq(dev, client->irq, NULL, pixcir_ts_isr,
>  					  IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
>  					  client->name, tsdata);
> @@ -542,6 +580,14 @@ static int pixcir_i2c_ts_probe(struct i2c_client *client,
>  		return error;
>  	}
>  
> +	if (!IS_ERR_OR_NULL(tsdata->gpio_wake))
> +		gpiod_set_value_cansleep(tsdata->gpio_wake, 1);
> +
> +	if (!IS_ERR_OR_NULL(tsdata->gpio_enable)) {
> +		gpiod_set_value_cansleep(tsdata->gpio_enable, 1);
> +		msleep(100);
> +	}
> +
>  	pixcir_reset(tsdata);
>  
>  	/* Always be in IDLE mode to save power, device supports auto wake */
> -- 
> 2.5.0
> 
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 4/7] touchscreen: pixcir_i2c: Add support for wake and enable gpios

[Dmitry Torokhov]

On Fri, Nov 20, 2015 at 12:17:10PM +0100, Hans de Goede wrote:
> From: Sander Vermin <sander-wENMetUwf8VmR6Xm/wNWPw@public.gmane.org>
> 
> On some devices the wake and enable pins of the pixcir touchscreen
> controller are connected to gpios and these must be controlled by the
> driver for the device to operate properly.
> 
> Signed-off-by: Sander Vermin <sander-wENMetUwf8VmR6Xm/wNWPw@public.gmane.org>
> Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
> ---
> Changes in v2 (Hans de Goede):
> -Split the changes for dealing with inverted / swapped axis out into a
>  separate patch
> -Remove a bunch of dev_info calls to make the driver less chatty
> -Use devm_gpiod_get_optional as these new gpios are optional
> -Only msleep after setting enable high if we have an enable pin
> ---
>  .../bindings/input/touchscreen/pixcir_i2c_ts.txt   |  2 +
>  drivers/input/touchscreen/pixcir_i2c_ts.c          | 46 ++++++++++++++++++++++
>  2 files changed, 48 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/input/touchscreen/pixcir_i2c_ts.txt b/Documentation/devicetree/bindings/input/touchscreen/pixcir_i2c_ts.txt
> index 8eb240a..72ca5ec 100644
> --- a/Documentation/devicetree/bindings/input/touchscreen/pixcir_i2c_ts.txt
> +++ b/Documentation/devicetree/bindings/input/touchscreen/pixcir_i2c_ts.txt
> @@ -10,6 +10,8 @@ Required properties:
>  
>  Optional properties:
>  - reset-gpio: GPIO connected to the RESET line of the chip
> +- enable-gpios: GPIO connected to the ENABLE line of the chip
> +- wake-gpios: GPIO connected to the WAKE line of the chip
>  
>  Example:
>  
> diff --git a/drivers/input/touchscreen/pixcir_i2c_ts.c b/drivers/input/touchscreen/pixcir_i2c_ts.c
> index 211408c..b75ef65 100644
> --- a/drivers/input/touchscreen/pixcir_i2c_ts.c
> +++ b/drivers/input/touchscreen/pixcir_i2c_ts.c
> @@ -38,6 +38,8 @@ struct pixcir_i2c_ts_data {
>  	struct input_dev *input;
>  	struct gpio_desc *gpio_attb;
>  	struct gpio_desc *gpio_reset;
> +	struct gpio_desc *gpio_enable;
> +	struct gpio_desc *gpio_wake;
>  	const struct pixcir_i2c_chip_data *chip;
>  	int max_fingers;	/* Max fingers supported in this instance */
>  	bool running;
> @@ -208,6 +210,11 @@ static int pixcir_set_power_mode(struct pixcir_i2c_ts_data *ts,
>  	struct device *dev = &ts->client->dev;
>  	int ret;
>  
> +	if (mode == PIXCIR_POWER_ACTIVE || mode == PIXCIR_POWER_IDLE) {
> +		if (!IS_ERR_OR_NULL(ts->gpio_wake))
> +			gpiod_set_value_cansleep(ts->gpio_wake, 1);

I believe you error out in case when IS_ERR(ts->gpio_wake) is true, so I
wonder if we should simply use

		if (ts->gpio_wake)
			gpiod_set_value_cansleep(ts->gpio_wake, 1);

here and elsewhere.

No need to resubmit, just let me know.

Thanks.

-- 
Dmitry

Re: [linux-sunxi] Re: [PATCH 4/7] touchscreen: pixcir_i2c: Add support for wake and enable gpios

[Hans de Goede]

Hi,

On 20-11-15 18:27, Dmitry Torokhov wrote:
> On Fri, Nov 20, 2015 at 12:17:10PM +0100, Hans de Goede wrote:
>> From: Sander Vermin <sander@vermin.nl>
>>
>> On some devices the wake and enable pins of the pixcir touchscreen
>> controller are connected to gpios and these must be controlled by the
>> driver for the device to operate properly.
>>
>> Signed-off-by: Sander Vermin <sander@vermin.nl>
>> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
>> ---
>> Changes in v2 (Hans de Goede):
>> -Split the changes for dealing with inverted / swapped axis out into a
>>   separate patch
>> -Remove a bunch of dev_info calls to make the driver less chatty
>> -Use devm_gpiod_get_optional as these new gpios are optional
>> -Only msleep after setting enable high if we have an enable pin
>> ---
>>   .../bindings/input/touchscreen/pixcir_i2c_ts.txt   |  2 +
>>   drivers/input/touchscreen/pixcir_i2c_ts.c          | 46 ++++++++++++++++++++++
>>   2 files changed, 48 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/input/touchscreen/pixcir_i2c_ts.txt b/Documentation/devicetree/bindings/input/touchscreen/pixcir_i2c_ts.txt
>> index 8eb240a..72ca5ec 100644
>> --- a/Documentation/devicetree/bindings/input/touchscreen/pixcir_i2c_ts.txt
>> +++ b/Documentation/devicetree/bindings/input/touchscreen/pixcir_i2c_ts.txt
>> @@ -10,6 +10,8 @@ Required properties:
>>
>>   Optional properties:
>>   - reset-gpio: GPIO connected to the RESET line of the chip
>> +- enable-gpios: GPIO connected to the ENABLE line of the chip
>> +- wake-gpios: GPIO connected to the WAKE line of the chip
>>
>>   Example:
>>
>> diff --git a/drivers/input/touchscreen/pixcir_i2c_ts.c b/drivers/input/touchscreen/pixcir_i2c_ts.c
>> index 211408c..b75ef65 100644
>> --- a/drivers/input/touchscreen/pixcir_i2c_ts.c
>> +++ b/drivers/input/touchscreen/pixcir_i2c_ts.c
>> @@ -38,6 +38,8 @@ struct pixcir_i2c_ts_data {
>>   	struct input_dev *input;
>>   	struct gpio_desc *gpio_attb;
>>   	struct gpio_desc *gpio_reset;
>> +	struct gpio_desc *gpio_enable;
>> +	struct gpio_desc *gpio_wake;
>>   	const struct pixcir_i2c_chip_data *chip;
>>   	int max_fingers;	/* Max fingers supported in this instance */
>>   	bool running;
>> @@ -208,6 +210,11 @@ static int pixcir_set_power_mode(struct pixcir_i2c_ts_data *ts,
>>   	struct device *dev = &ts->client->dev;
>>   	int ret;
>>
>> +	if (mode == PIXCIR_POWER_ACTIVE || mode == PIXCIR_POWER_IDLE) {
>> +		if (!IS_ERR_OR_NULL(ts->gpio_wake))
>> +			gpiod_set_value_cansleep(ts->gpio_wake, 1);
>
> I believe you error out in case when IS_ERR(ts->gpio_wake) is true, so I
> wonder if we should simply use
>
> 		if (ts->gpio_wake)
> 			gpiod_set_value_cansleep(ts->gpio_wake, 1);
>
> here and elsewhere.

Yes that will work fine, I believe Sander went with his version because that
is what the existing gpio code (for the also optional reset pin) already does.

So from a consistency pov it is better to keep this patch as is.

> No need to resubmit, just let me know.

Ok, either way is fine with me.

Regards,

Hans