From: Jason Gerecke <killertofu@gmail.com>
To: linux-input@vger.kernel.org
Cc: Jiri Kosina <jkosina@suse.cz>, Ping Cheng <pinglinux@gmail.com>,
Aaron Skomra <skomra@gmail.com>,
Jason Gerecke <killertofu@gmail.com>,
Jason Gerecke <jason.gerecke@wacom.com>
Subject: [PATCH 6/7] HID: wacom: Clean up value reading
Date: Mon, 30 Nov 2015 17:13:51 -0800 [thread overview]
Message-ID: <1448932432-10115-6-git-send-email-killertofu@gmail.com> (raw)
In-Reply-To: <1448932432-10115-1-git-send-email-killertofu@gmail.com>
Make the logic for reading X, Y, distance, and pressure a bit more
clear. An additional bit was stuffed into the packet format many
models back, and /most/ devices in use will use it. If we happen
to be dealing with a particularly old tablet, just shift it off
the end to pretend we never read it.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
---
drivers/hid/wacom_wac.c | 27 ++++++++++++++-------------
1 file changed, 14 insertions(+), 13 deletions(-)
diff --git a/drivers/hid/wacom_wac.c b/drivers/hid/wacom_wac.c
index ce3afab..0008650 100644
--- a/drivers/hid/wacom_wac.c
+++ b/drivers/hid/wacom_wac.c
@@ -887,21 +887,23 @@ static int wacom_intuos_general(struct wacom_wac *wacom)
struct input_dev *input = wacom->pen_input;
int idx = (features->type == INTUOS) ? (data[1] & 0x01) : 0;
unsigned char type = (data[1] >> 1) & 0x0F;
- unsigned int t;
+ unsigned int x, y, distance, t;
if (data[0] != WACOM_REPORT_PENABLED && data[0] != WACOM_REPORT_CINTIQ &&
data[0] != WACOM_REPORT_INTUOS_PEN)
return 0;
- if (features->type >= INTUOS3S) {
- input_report_abs(input, ABS_X, (data[2] << 9) | (data[3] << 1) | ((data[9] >> 1) & 1));
- input_report_abs(input, ABS_Y, (data[4] << 9) | (data[5] << 1) | (data[9] & 1));
- input_report_abs(input, ABS_DISTANCE, ((data[9] >> 2) & 0x3f));
- } else {
- input_report_abs(input, ABS_X, be16_to_cpup((__be16 *)&data[2]));
- input_report_abs(input, ABS_Y, be16_to_cpup((__be16 *)&data[4]));
- input_report_abs(input, ABS_DISTANCE, ((data[9] >> 3) & 0x1f));
+ x = (be16_to_cpup((__be16 *)&data[2]) << 1) | ((data[9] >> 1) & 1);
+ y = (be16_to_cpup((__be16 *)&data[4]) << 1) | (data[9] & 1);
+ distance = data[9] >> 2;
+ if (features->type < INTUOS3S) {
+ x >>= 1;
+ y >>= 1;
+ distance >>= 1;
}
+ input_report_abs(input, ABS_X, x);
+ input_report_abs(input, ABS_Y, y);
+ input_report_abs(input, ABS_DISTANCE, distance);
switch (type) {
case 0x00:
@@ -909,10 +911,9 @@ static int wacom_intuos_general(struct wacom_wac *wacom)
case 0x02:
case 0x03:
/* general pen packet */
- t = (data[6] << 2) | ((data[7] >> 6) & 3);
- if (features->pressure_max == 2047) {
- t = (t << 1) | (data[1] & 1);
- }
+ t = (data[6] << 3) | ((data[7] & 0xC0) >> 5) | (data[1] & 1);
+ if (features->pressure_max < 2047)
+ t >>= 1;
input_report_abs(input, ABS_PRESSURE, t);
if (features->type != INTUOSHT2) {
input_report_abs(input, ABS_TILT_X,
--
2.6.2
next prev parent reply other threads:[~2015-12-01 1:13 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-01 1:13 [PATCH 1/7] HID: wacom: Move Intuos pad handling code into dedicated function Jason Gerecke
2015-12-01 1:13 ` [PATCH 2/7] HID: wacom: Slim down wacom_intuos_pad processing Jason Gerecke
2015-12-01 1:13 ` [PATCH 3/7] HID: wacom: Centralize Intuos pen packet decoding Jason Gerecke
2015-12-01 1:13 ` [PATCH 4/7] HID: wacom: Replace magic masks and comparisons with switch cases Jason Gerecke
2015-12-01 1:13 ` [PATCH 5/7] HID: wacom: Further clean up wacom_intuos_general packet decoder Jason Gerecke
2015-12-01 1:13 ` Jason Gerecke [this message]
2015-12-01 1:13 ` [PATCH 7/7] HID: wacom: Rename wacom ID report ID macros Jason Gerecke
2015-12-02 15:21 ` [PATCH 1/7] HID: wacom: Move Intuos pad handling code into dedicated function Jiri Kosina
2015-12-02 15:22 ` Jiri Kosina
2015-12-02 20:46 ` Jiri Kosina
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1448932432-10115-6-git-send-email-killertofu@gmail.com \
--to=killertofu@gmail.com \
--cc=jason.gerecke@wacom.com \
--cc=jkosina@suse.cz \
--cc=linux-input@vger.kernel.org \
--cc=pinglinux@gmail.com \
--cc=skomra@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).