From mboxrd@z Thu Jan 1 00:00:00 1970 From: Markus Pargmann Subject: [PATCH v10 2/8] ARM: dt: Binding documentation for imx25 GCQ Date: Mon, 14 Dec 2015 14:53:48 +0100 Message-ID: <1450101234-2191-3-git-send-email-mpa@pengutronix.de> References: <1450101234-2191-1-git-send-email-mpa@pengutronix.de> Return-path: In-Reply-To: <1450101234-2191-1-git-send-email-mpa-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org> Sender: linux-iio-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Shawn Guo , Dmitry Torokhov , Jonathan Cameron , Lee Jones Cc: Denis Carikli , =?UTF-8?q?Eric=20B=C3=A9nard?= , Sascha Hauer , devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-input-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-iio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, Hartmut Knaack , Fabio Estevam , Markus Pargmann List-Id: linux-input@vger.kernel.org The documentation describes the bindings for the imx25 GCQ unit which is essentially a generic conversion queue using the imx25 ADC. Signed-off-by: Markus Pargmann Acked-by: Rob Herring Acked-by: Jonathan Cameron --- Notes: Changes in v9: - Added the dt-bindings header to this patch instead of the driver Changes in v6: - Changed bindings to use adc-refp and adc-refn. Also a bit of cleanup in the setup routine. Changes in v5: - Fixed locking - Removed module owner .../devicetree/bindings/iio/adc/fsl,imx25-gcq.txt | 58 ++++++++++++++++++++++ include/dt-bindings/iio/adc/fsl-imx25-gcq.h | 18 +++++++ 2 files changed, 76 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/adc/fsl,imx25-gcq.txt create mode 100644 include/dt-bindings/iio/adc/fsl-imx25-gcq.h diff --git a/Documentation/devicetree/bindings/iio/adc/fsl,imx25-gcq.txt b/Documentation/devicetree/bindings/iio/adc/fsl,imx25-gcq.txt new file mode 100644 index 000000000000..b0866d36a307 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/fsl,imx25-gcq.txt @@ -0,0 +1,58 @@ +Freescale i.MX25 ADC GCQ device + +This is a generic conversion queue device that can convert any of the +analog inputs using the ADC unit of the i.MX25. + +Required properties: + - compatible: Should be "fsl,imx25-gcq". + - reg: Should be the register range of the module. + - interrupts: Should be the interrupt number of the module. + Typically this is <1>. + - interrupt-parent: phandle to the tsadc module of the i.MX25. + - #address-cells: Should be <1> (setting for the subnodes) + - #size-cells: Should be <0> (setting for the subnodes) + +Optional properties: + - vref-ext-supply: The regulator supplying the ADC reference voltage. + Required when at least one subnode uses the this reference. + - vref-xp-supply: The regulator supplying the ADC reference voltage on pin XP. + Required when at least one subnode uses this reference. + - vref-yp-supply: The regulator supplying the ADC reference voltage on pin YP. + Required when at least one subnode uses this reference. + +Sub-nodes: +Optionally you can define subnodes which define the reference voltage +for the analog inputs. + +Required properties for subnodes: + - reg: Should be the number of the analog input. + 0: xp + 1: yp + 2: xn + 3: yn + 4: wiper + 5: inaux0 + 6: inaux1 + 7: inaux2 +Optional properties for subnodes: + - fsl,adc-refp: specifies the positive reference input as defined in + + - fsl,adc-refn: specifies the negative reference input as defined in + + +Example: + + adc: adc@50030800 { + compatible = "fsl,imx25-gcq"; + reg = <0x50030800 0x60>; + interrupt-parent = <&tscadc>; + interrupts = <1>; + #address-cells = <1>; + #size-cells = <0>; + + inaux@5 { + reg = <5>; + fsl,adc-refp = ; + fsl,adc-refn = ; + }; + }; diff --git a/include/dt-bindings/iio/adc/fsl-imx25-gcq.h b/include/dt-bindings/iio/adc/fsl-imx25-gcq.h new file mode 100644 index 000000000000..87abdd4a7674 --- /dev/null +++ b/include/dt-bindings/iio/adc/fsl-imx25-gcq.h @@ -0,0 +1,18 @@ +/* + * This header provides constants for configuring the I.MX25 ADC + */ + +#ifndef _DT_BINDINGS_IIO_ADC_FS_IMX25_GCQ_H +#define _DT_BINDINGS_IIO_ADC_FS_IMX25_GCQ_H + +#define MX25_ADC_REFP_YP 0 /* YP voltage reference */ +#define MX25_ADC_REFP_XP 1 /* XP voltage reference */ +#define MX25_ADC_REFP_EXT 2 /* External voltage reference */ +#define MX25_ADC_REFP_INT 3 /* Internal voltage reference */ + +#define MX25_ADC_REFN_XN 0 /* XN ground reference */ +#define MX25_ADC_REFN_YN 1 /* YN ground reference */ +#define MX25_ADC_REFN_NGND 2 /* Internal ground reference */ +#define MX25_ADC_REFN_NGND2 3 /* External ground reference */ + +#endif -- 2.6.2