* [PATCH] ARM: Ux500: add synaptics RMI4 for Ux500 TVK DT
@ 2016-02-05 12:38 Linus Walleij
2016-02-06 0:26 ` Andrew Duggan
0 siblings, 1 reply; 2+ messages in thread
From: Linus Walleij @ 2016-02-05 12:38 UTC (permalink / raw)
To: Andrew Duggan, Dmitry Torokhov, linux-input
Cc: Christopher Heiny, Vincent Huang, Linus Walleij
This adds the Synaptics RMI4 touchscreen to the Ux500 TVK
user interface board. Tested on the U8500 HREFv60plus with
the TVK UIB.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
I will merge this through the ARM SoC tree, just looking for ACKs
from Andrew et al, maybe an indication from Dmitry if the RMI4
stuff will be merged so I can apply this too.
---
arch/arm/boot/dts/ste-href-tvk1281618.dtsi | 37 +++++++++++++++++++++++++++++-
1 file changed, 36 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi
index b7b4211c5353..55f9d0cc90f3 100644
--- a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi
+++ b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi
@@ -37,7 +37,6 @@
};
soc {
- /* Add Synaptics touch screen, TC35893 keypad etc here */
i2c@80004000 {
tc35893@44 {
compatible = "toshiba,tc35893";
@@ -159,6 +158,33 @@
vddio-supply = <&db8500_vsmps2_reg>;
};
};
+
+ i2c@80110000 {
+ synaptics@4b {
+ /* Synaptics RMI4 TM1217 touchscreen */
+ compatible = "syna,rmi4-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x4b>;
+ vdd-supply = <&ab8500_ldo_aux1_reg>;
+ vddio-supply = <&db8500_vsmps2_reg>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&synaptics_tvk_mode>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <20 IRQ_TYPE_EDGE_FALLING>;
+
+ rmi-f01@1 {
+ reg = <0x1>;
+ syna,nosleep = <1>;
+ };
+ rmi-f11@11 {
+ reg = <0x11>;
+ touchscreen-inverted-x;
+ syna,sensor-type = <1>;
+ };
+ };
+ };
+
pinctrl {
/* Pull up this GPIO pin */
tc35893 {
@@ -212,6 +238,15 @@
};
};
};
+ synaptics {
+ synaptics_tvk_mode: synaptics_tvk {
+ /* Touchscreen uses GPIO 84 */
+ tvk_cfg1 {
+ pins = "GPIO84_C2";
+ ste,config = <&gpio_in_pu>;
+ };
+ };
+ };
};
};
};
--
2.4.3
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] ARM: Ux500: add synaptics RMI4 for Ux500 TVK DT
2016-02-05 12:38 [PATCH] ARM: Ux500: add synaptics RMI4 for Ux500 TVK DT Linus Walleij
@ 2016-02-06 0:26 ` Andrew Duggan
0 siblings, 0 replies; 2+ messages in thread
From: Andrew Duggan @ 2016-02-06 0:26 UTC (permalink / raw)
To: Linus Walleij, Dmitry Torokhov, linux-input
Cc: Christopher Heiny, Vincent Huang
On 02/05/2016 04:38 AM, Linus Walleij wrote:
> This adds the Synaptics RMI4 touchscreen to the Ux500 TVK
> user interface board. Tested on the U8500 HREFv60plus with
> the TVK UIB.
>
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Andrew Duggan <aduggan@synaptics.com>
> ---
> I will merge this through the ARM SoC tree, just looking for ACKs
> from Andrew et al, maybe an indication from Dmitry if the RMI4
> stuff will be merged so I can apply this too.
> ---
> arch/arm/boot/dts/ste-href-tvk1281618.dtsi | 37 +++++++++++++++++++++++++++++-
> 1 file changed, 36 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi
> index b7b4211c5353..55f9d0cc90f3 100644
> --- a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi
> +++ b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi
> @@ -37,7 +37,6 @@
> };
>
> soc {
> - /* Add Synaptics touch screen, TC35893 keypad etc here */
> i2c@80004000 {
> tc35893@44 {
> compatible = "toshiba,tc35893";
> @@ -159,6 +158,33 @@
> vddio-supply = <&db8500_vsmps2_reg>;
> };
> };
> +
> + i2c@80110000 {
> + synaptics@4b {
> + /* Synaptics RMI4 TM1217 touchscreen */
> + compatible = "syna,rmi4-i2c";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x4b>;
> + vdd-supply = <&ab8500_ldo_aux1_reg>;
> + vddio-supply = <&db8500_vsmps2_reg>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&synaptics_tvk_mode>;
> + interrupt-parent = <&gpio2>;
> + interrupts = <20 IRQ_TYPE_EDGE_FALLING>;
> +
> + rmi-f01@1 {
> + reg = <0x1>;
> + syna,nosleep = <1>;
> + };
> + rmi-f11@11 {
> + reg = <0x11>;
> + touchscreen-inverted-x;
> + syna,sensor-type = <1>;
> + };
> + };
> + };
> +
> pinctrl {
> /* Pull up this GPIO pin */
> tc35893 {
> @@ -212,6 +238,15 @@
> };
> };
> };
> + synaptics {
> + synaptics_tvk_mode: synaptics_tvk {
> + /* Touchscreen uses GPIO 84 */
> + tvk_cfg1 {
> + pins = "GPIO84_C2";
> + ste,config = <&gpio_in_pu>;
> + };
> + };
> + };
> };
> };
> };
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2016-02-06 0:26 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-02-05 12:38 [PATCH] ARM: Ux500: add synaptics RMI4 for Ux500 TVK DT Linus Walleij
2016-02-06 0:26 ` Andrew Duggan
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).