From: Grant Grundler <grundler-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
To: Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
Dmitry Torokhov
<dmitry.torokhov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: devicetree <devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
linux-input <linux-input-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
LKML <linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
Hung-yu Wu <hywu-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org>,
Kumar Gala <galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>,
Ian Campbell
<ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>,
Grant Likely
<grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
Grant Grundler <grundler-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
Subject: [PATCH] dt: add Atmel Captouch bindings
Date: Tue, 10 May 2016 19:07:48 -0700 [thread overview]
Message-ID: <1462932469-122552-1-git-send-email-grundler@chromium.org> (raw)
From: Daniel Hung-yu Wu <hywu-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org>
Add binding for Atmel Capacitive Touch Button device.
Signed-off-by: Daniel Hung-yu Wu <hywu-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org>
Signed-off-by: Grant Grundler <grundler-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
---
.../devicetree/bindings/input/atmel,captouch.txt | 34 ++++++++++++++++++++++
1 file changed, 34 insertions(+)
create mode 100644 Documentation/devicetree/bindings/input/atmel,captouch.txt
I haven't posted the corresponding device driver and dtsi changes yet but will shortly.
V2: split Documentation/devicetree/bindings from driver patch
rename "atmel,atmegaxx_captouch" to "atmel,captouch" since it's irrelevant
which controller implements the register set/controller.
V1: posted https://lkml.org/lkml/2016/5/3/613
diff --git a/Documentation/devicetree/bindings/input/atmel,captouch.txt b/Documentation/devicetree/bindings/input/atmel,captouch.txt
new file mode 100644
index 0000000..405d287
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/atmel,captouch.txt
@@ -0,0 +1,34 @@
+Device tree bindings for Atmel AtmegaXX capacitive touch sensor
+
+The node for this device must be a child of a I2C controller node, as the
+device communicates via I2C.
+
+Required properties:
+
+ compatible: Must be "atmel,captouch".
+ reg: The I2C slave address of the device.
+ interrupts: Property describing the interrupt line the device
+ is connected to. The device only has one interrupt
+ source.
+ linux,keycodes: Specifies an array of numeric keycode values to
+ be used for reporting button presses. The array can
+ contain up to 8 entries.
+
+Optional properties:
+
+ autorepeat: Enables the Linux input system's autorepeat
+ feature on the input device.
+
+Example:
+
+ atmel_captouch@51 {
+ compatible = "atmel,captouch";
+ reg = <0x51>;
+ interrupt-parent = <&tlmm>;
+ interrupts = <67 IRQ_TYPE_EDGE_FALLING>;
+ linux,keycodes = <BTN_0>, <BTN_1>,
+ <BTN_2>, <BTN_3>,
+ <BTN_4>, <BTN_5>,
+ <BTN_6>, <BTN_7>;
+ autorepeat;
+ };
--
2.1.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2016-05-11 2:07 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-11 2:07 Grant Grundler [this message]
[not found] ` <1462932469-122552-1-git-send-email-grundler-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
2016-05-11 2:07 ` [PATCH 2/3 V2] Input: add Atmel Captouch Button driver Grant Grundler
2016-05-13 18:16 ` Grant Grundler
2016-05-13 18:38 ` [PATCH] dt: add Atmel Captouch bindings Dmitry Torokhov
2016-05-14 14:52 ` Rob Herring
2016-05-16 16:50 ` Grant Grundler
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1462932469-122552-1-git-send-email-grundler@chromium.org \
--to=grundler-f7+t8e8rja9g9huczpvpmw@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=dmitry.torokhov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
--cc=grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=hywu-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org \
--cc=ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org \
--cc=linux-input-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=pawel.moll-5wv7dgnIgG8@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).