From: Benjamin Tissoires <benjamin.tissoires@redhat.com>
To: Dmitry Torokhov <dmitry.torokhov@gmail.com>,
Lyude Paul <thatslyude@gmail.com>,
Andrew Duggan <aduggan@synaptics.com>,
Christopher Heiny <cheiny@synaptics.com>
Cc: Peter Hutterer <peter.hutterer@who-t.net>,
linux-kernel@vger.kernel.org, linux-input@vger.kernel.org
Subject: [PATCH v2 00/12] Synaptics RMI4 over SMBus
Date: Wed, 28 Sep 2016 10:35:35 +0200 [thread overview]
Message-ID: <1475051747-25988-1-git-send-email-benjamin.tissoires@redhat.com> (raw)
Hi,
This is the second version of Synaptics RMI4 over SMBus. There are few
differences compared to the previous submission:
- comments from Andrew are addressed
- fixed an oops when using the "rescan" feature from serio/drvctrl
- use alloc_ordered_workqueue instead of create_singlethread_workqueue
Dmitry, Elan has a similar binding mechanism (touchpad only declared as a PS/2
device, while it can be controlled over SMBus through elan_i2c.ko). I'd like
to have your opinion on using an intermediate platform driver to do the binding
from PS/2. It seems to me that it's the cleanest solution, but you may have
other hints. Note that in the Elan case, the platform driver will get much
simpler because there is no PS/2 passthrough device handled under SMBus (the
protocol is completely defined for the trackstick).
Cheers,
Benjamin
Benjamin Tissoires (10):
Input: synaptics-rmi4 - add SMBus support
Input: serio - store the pt_buttons in the struct serio directly
Input: synaptics-rmi4 - have only one struct platform data
Input: synaptics-rmi4 - Add rmi_find_function()
Input: synaptics-rmi4 - f30/f03: Forward mechanical buttons on
buttonpads to PS/2 guest
Input: synaptics - allocate a Synaptics Intertouch device
Input: synaptics-rmi4 - add rmi_platform
Input: synaptics-rmi4 - smbus: call psmouse_deactivate before
binding/resume
Input: synaptics-rmi4 - smbus: on resume, try 3 times if init fails
Input: synaptics-rmi4 - fix documentation of
rmi_2d_sensor_platform_data
Dennis Wassenberg (1):
Input: synaptics-rmi4 - f03: grab data passed by transport device
Lyude Paul (1):
Input: synaptics-rmi4 - add support for F03
drivers/input/mouse/psmouse-base.c | 12 +
drivers/input/mouse/psmouse.h | 1 +
drivers/input/mouse/synaptics.c | 153 +++++++++++-
drivers/input/mouse/synaptics.h | 5 +-
drivers/input/rmi4/Kconfig | 33 +++
drivers/input/rmi4/Makefile | 3 +
drivers/input/rmi4/rmi_bus.c | 3 +
drivers/input/rmi4/rmi_bus.h | 12 +
drivers/input/rmi4/rmi_driver.c | 13 +
drivers/input/rmi4/rmi_driver.h | 15 ++
drivers/input/rmi4/rmi_f03.c | 272 +++++++++++++++++++++
drivers/input/rmi4/rmi_f11.c | 4 +-
drivers/input/rmi4/rmi_f12.c | 4 +-
drivers/input/rmi4/rmi_f30.c | 79 ++++--
drivers/input/rmi4/rmi_platform.c | 235 ++++++++++++++++++
drivers/input/rmi4/rmi_smbus.c | 478 +++++++++++++++++++++++++++++++++++++
include/linux/rmi.h | 19 +-
include/linux/serio.h | 8 +
include/uapi/linux/serio.h | 1 +
19 files changed, 1314 insertions(+), 36 deletions(-)
create mode 100644 drivers/input/rmi4/rmi_f03.c
create mode 100644 drivers/input/rmi4/rmi_platform.c
create mode 100644 drivers/input/rmi4/rmi_smbus.c
--
2.7.4
next reply other threads:[~2016-09-28 8:35 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-28 8:35 Benjamin Tissoires [this message]
2016-09-28 8:35 ` [PATCH v2 01/12] Input: synaptics-rmi4 - add SMBus support Benjamin Tissoires
2016-09-28 8:35 ` [PATCH v2 02/12] Input: serio - store the pt_buttons in the struct serio directly Benjamin Tissoires
2016-09-28 8:35 ` [PATCH v2 03/12] Input: synaptics-rmi4 - have only one struct platform data Benjamin Tissoires
2016-09-28 8:35 ` [PATCH v2 04/12] Input: synaptics-rmi4 - add support for F03 Benjamin Tissoires
2016-09-28 8:35 ` [PATCH v2 05/12] Input: synaptics-rmi4 - f03: grab data passed by transport device Benjamin Tissoires
2016-09-28 8:35 ` [PATCH v2 06/12] Input: synaptics-rmi4 - Add rmi_find_function() Benjamin Tissoires
2016-09-28 8:35 ` [PATCH v2 07/12] Input: synaptics-rmi4 - f30/f03: Forward mechanical buttons on buttonpads to PS/2 guest Benjamin Tissoires
2016-09-28 8:35 ` [PATCH v2 08/12] Input: synaptics - allocate a Synaptics Intertouch device Benjamin Tissoires
2016-09-28 8:35 ` [PATCH v2 09/12] Input: synaptics-rmi4 - add rmi_platform Benjamin Tissoires
2016-09-28 8:35 ` [PATCH v2 10/12] Input: synaptics-rmi4 - smbus: call psmouse_deactivate before binding/resume Benjamin Tissoires
2016-09-28 8:35 ` [PATCH v2 11/12] Input: synaptics-rmi4 - smbus: on resume, try 3 times if init fails Benjamin Tissoires
2016-09-28 8:35 ` [PATCH v2 12/12] Input: synaptics-rmi4 - fix documentation of rmi_2d_sensor_platform_data Benjamin Tissoires
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1475051747-25988-1-git-send-email-benjamin.tissoires@redhat.com \
--to=benjamin.tissoires@redhat.com \
--cc=aduggan@synaptics.com \
--cc=cheiny@synaptics.com \
--cc=dmitry.torokhov@gmail.com \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=peter.hutterer@who-t.net \
--cc=thatslyude@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).