[PATCH] Input: trackpoint: add new trackpoint firmware ID

[Aaron Ma <aaron.ma@canonical.com>]

Synaptics add new TP firmware ID: 0x2 and 0x3, for now both lower 2 bits
are indicated as TP. Change the constant to bitwise values.

Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Cc: stable@vger.kernel.org
---
 drivers/input/mouse/trackpoint.c | 3 ++-
 drivers/input/mouse/trackpoint.h | 3 ++-
 2 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/input/mouse/trackpoint.c b/drivers/input/mouse/trackpoint.c
index 7331084..9ff0f38 100644
--- a/drivers/input/mouse/trackpoint.c
+++ b/drivers/input/mouse/trackpoint.c
@@ -265,7 +265,8 @@ static int trackpoint_start_protocol(struct psmouse *psmouse, unsigned char *fir
 	if (ps2_command(&psmouse->ps2dev, param, MAKE_PS2_CMD(0, 2, TP_READ_ID)))
 		return -1;
 
-	if (param[0] != TP_MAGIC_IDENT)
+	/* add new TP ID. */
+	if (!(param[0] & TP_MAGIC_IDENT))
 		return -1;
 
 	if (firmware_id)
diff --git a/drivers/input/mouse/trackpoint.h b/drivers/input/mouse/trackpoint.h
index 5617ed3..8805575 100644
--- a/drivers/input/mouse/trackpoint.h
+++ b/drivers/input/mouse/trackpoint.h
@@ -21,8 +21,9 @@
 #define TP_COMMAND		0xE2	/* Commands start with this */
 
 #define TP_READ_ID		0xE1	/* Sent for device identification */
-#define TP_MAGIC_IDENT		0x01	/* Sent after a TP_READ_ID followed */
+#define TP_MAGIC_IDENT		0x03	/* Sent after a TP_READ_ID followed */
 					/* by the firmware ID */
+					/* Firmware ID includes 0x1, 0x2, 0x3 */
 
 
 /*
-- 
2.9.3