[PATCH] HID: i2c-hid: Skip ELAN power-on command after reset

[PATCH] HID: i2c-hid: Skip ELAN power-on command after reset

[Johnny Chuang]

Previous commit 43b7029f475e ("HID: i2c-hid:
Send power-on command after reset"), it fixed issue for SIS touchscreen.

For ELAN touchscreen, we found our boot code of IC was not flexible enough
to receive and handle this command.
Once the FW main code of our controller is crashed for some reason,
the controller could not be enumerated successfully to be recognized
by the system host. therefore, it lost touch functionality.

Add quirk for skip send power-on command after reset.
It will impact to ELAN touchscreen and touchpad on HID over I2C projects.

Signed-off-by: Johnny Chuang <johnny.chuang.emc@gmail.com>
---
 drivers/hid/i2c-hid/i2c-hid-core.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/hid/i2c-hid/i2c-hid-core.c b/drivers/hid/i2c-hid/i2c-hid-core.c
index 9993133..6b407f7 100644
--- a/drivers/hid/i2c-hid/i2c-hid-core.c
+++ b/drivers/hid/i2c-hid/i2c-hid-core.c
@@ -45,6 +45,7 @@
 #define I2C_HID_QUIRK_BOGUS_IRQ			BIT(4)
 #define I2C_HID_QUIRK_RESET_ON_RESUME		BIT(5)
 #define I2C_HID_QUIRK_BAD_INPUT_SIZE		BIT(6)
+#define I2C_HID_QUIRK_NO_WAKEUP_AFTER_RESET	BIT(7)
 
 
 /* flags */
@@ -157,6 +158,10 @@ struct i2c_hid {
 	struct i2chid_ops	*ops;
 };
 
+/*
+ * Sending the wakeup after reset actually break ELAN touchscreen controller
+ * So add I2C_HID_QUIRK_NO_WAKEUP_AFTER_RESET to skip wakeup after reset
+ */
 static const struct i2c_hid_quirks {
 	__u16 idVendor;
 	__u16 idProduct;
@@ -178,6 +183,8 @@ static const struct i2c_hid_quirks {
 		 I2C_HID_QUIRK_RESET_ON_RESUME },
 	{ USB_VENDOR_ID_ITE, I2C_DEVICE_ID_ITE_LENOVO_LEGION_Y720,
 		I2C_HID_QUIRK_BAD_INPUT_SIZE },
+	{ USB_VENDOR_ID_ELAN, HID_ANY_ID,
+		 I2C_HID_QUIRK_NO_WAKEUP_AFTER_RESET },
 	{ 0, 0 }
 };
 
@@ -461,7 +468,8 @@ static int i2c_hid_hwreset(struct i2c_client *client)
 	}
 
 	/* At least some SIS devices need this after reset */
-	ret = i2c_hid_set_power(client, I2C_HID_PWR_ON);
+	if (!(ihid->quirks & I2C_HID_QUIRK_NO_WAKEUP_AFTER_RESET))
+		ret = i2c_hid_set_power(client, I2C_HID_PWR_ON);
 
 out_unlock:
 	mutex_unlock(&ihid->reset_lock);
-- 
2.7.4

Re: [PATCH] HID: i2c-hid: Skip ELAN power-on command after reset

[Harry Cutts]

On Tue, 6 Apr 2021 at 23:49, Johnny Chuang <johnny.chuang.emc@gmail.com> wrote:
>
> Previous commit 43b7029f475e ("HID: i2c-hid:
> Send power-on command after reset"), it fixed issue for SIS touchscreen.
>
> For ELAN touchscreen, we found our boot code of IC was not flexible enough
> to receive and handle this command.
> Once the FW main code of our controller is crashed for some reason,
> the controller could not be enumerated successfully to be recognized
> by the system host. therefore, it lost touch functionality.
>
> Add quirk for skip send power-on command after reset.
> It will impact to ELAN touchscreen and touchpad on HID over I2C projects.
>
> Signed-off-by: Johnny Chuang <johnny.chuang.emc@gmail.com>
> ---
>  drivers/hid/i2c-hid/i2c-hid-core.c | 10 +++++++++-
>  1 file changed, 9 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/hid/i2c-hid/i2c-hid-core.c b/drivers/hid/i2c-hid/i2c-hid-core.c
> index 9993133..6b407f7 100644
> --- a/drivers/hid/i2c-hid/i2c-hid-core.c
> +++ b/drivers/hid/i2c-hid/i2c-hid-core.c
> @@ -45,6 +45,7 @@
>  #define I2C_HID_QUIRK_BOGUS_IRQ                        BIT(4)
>  #define I2C_HID_QUIRK_RESET_ON_RESUME          BIT(5)
>  #define I2C_HID_QUIRK_BAD_INPUT_SIZE           BIT(6)
> +#define I2C_HID_QUIRK_NO_WAKEUP_AFTER_RESET    BIT(7)
>
>
>  /* flags */
> @@ -157,6 +158,10 @@ struct i2c_hid {
>         struct i2chid_ops       *ops;
>  };
>
> +/*
> + * Sending the wakeup after reset actually break ELAN touchscreen controller
> + * So add I2C_HID_QUIRK_NO_WAKEUP_AFTER_RESET to skip wakeup after reset
> + */

You should put this comment next to the quirk entry itself, since it
doesn't apply to the whole list.

>  static const struct i2c_hid_quirks {
>         __u16 idVendor;
>         __u16 idProduct;
> @@ -178,6 +183,8 @@ static const struct i2c_hid_quirks {
>                  I2C_HID_QUIRK_RESET_ON_RESUME },
>         { USB_VENDOR_ID_ITE, I2C_DEVICE_ID_ITE_LENOVO_LEGION_Y720,
>                 I2C_HID_QUIRK_BAD_INPUT_SIZE },

(comment should go here)

> +       { USB_VENDOR_ID_ELAN, HID_ANY_ID,
> +                I2C_HID_QUIRK_NO_WAKEUP_AFTER_RESET },
>         { 0, 0 }
>  };
>
> @@ -461,7 +468,8 @@ static int i2c_hid_hwreset(struct i2c_client *client)
>         }
>
>         /* At least some SIS devices need this after reset */
> -       ret = i2c_hid_set_power(client, I2C_HID_PWR_ON);
> +       if (!(ihid->quirks & I2C_HID_QUIRK_NO_WAKEUP_AFTER_RESET))
> +               ret = i2c_hid_set_power(client, I2C_HID_PWR_ON);
>
>  out_unlock:
>         mutex_unlock(&ihid->reset_lock);
> --
> 2.7.4
>