From: Even Xu <even.xu@intel.com>
To: jikos@kernel.org, srinivas.pandruvada@linux.intel.com,
bleung@chromium.org, tzungbi@kernel.org, groeck@chromium.org,
linux-input@vger.kernel.org, chrome-platform@lists.linux.dev
Cc: Even Xu <even.xu@intel.com>
Subject: [PATCH 4/4] platform: chrome: cros_ec_ishtp: use helper functions for connection
Date: Tue, 5 Dec 2023 09:50:33 +0800 [thread overview]
Message-ID: <1701741033-26222-5-git-send-email-even.xu@intel.com> (raw)
In-Reply-To: <1701741033-26222-1-git-send-email-even.xu@intel.com>
Use helper functions ishtp_cl_establish_connection() and
ishtp_cl_destroy_connection() to establish and destroy connection
respectively. These functions are used during initialization, reset and
deinitialization flows.
No functional changes are expected.
Signed-off-by: Even Xu <even.xu@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
---
drivers/platform/chrome/cros_ec_ishtp.c | 74 +++++++--------------------------
1 file changed, 15 insertions(+), 59 deletions(-)
diff --git a/drivers/platform/chrome/cros_ec_ishtp.c b/drivers/platform/chrome/cros_ec_ishtp.c
index cb2031c..5ac37bd 100644
--- a/drivers/platform/chrome/cros_ec_ishtp.c
+++ b/drivers/platform/chrome/cros_ec_ishtp.c
@@ -367,55 +367,33 @@ static void ish_event_cb(struct ishtp_cl_device *cl_device)
/**
* cros_ish_init() - Init function for ISHTP client
* @cros_ish_cl: ISHTP client instance
+ * @reset: true if called from reset handler
*
* This function complete the initializtion of the client.
*
* Return: 0 for success, negative error code for failure.
*/
-static int cros_ish_init(struct ishtp_cl *cros_ish_cl)
+static int cros_ish_init(struct ishtp_cl *cros_ish_cl, bool reset)
{
int rv;
- struct ishtp_device *dev;
- struct ishtp_fw_client *fw_client;
struct ishtp_cl_data *client_data = ishtp_get_client_data(cros_ish_cl);
- rv = ishtp_cl_link(cros_ish_cl);
- if (rv) {
- dev_err(cl_data_to_dev(client_data),
- "ishtp_cl_link failed\n");
- return rv;
- }
-
- dev = ishtp_get_ishtp_device(cros_ish_cl);
-
- /* Connect to firmware client */
- ishtp_set_tx_ring_size(cros_ish_cl, CROS_ISH_CL_TX_RING_SIZE);
- ishtp_set_rx_ring_size(cros_ish_cl, CROS_ISH_CL_RX_RING_SIZE);
-
- fw_client = ishtp_fw_cl_get_client(dev, &cros_ec_ishtp_id_table[0].guid);
- if (!fw_client) {
- dev_err(cl_data_to_dev(client_data),
- "ish client uuid not found\n");
- rv = -ENOENT;
- goto err_cl_unlink;
- }
-
- ishtp_cl_set_fw_client_id(cros_ish_cl,
- ishtp_get_fw_client_id(fw_client));
- ishtp_set_connection_state(cros_ish_cl, ISHTP_CL_CONNECTING);
-
- rv = ishtp_cl_connect(cros_ish_cl);
+ rv = ishtp_cl_establish_connection(cros_ish_cl,
+ &cros_ec_ishtp_id_table[0].guid,
+ CROS_ISH_CL_TX_RING_SIZE,
+ CROS_ISH_CL_RX_RING_SIZE,
+ reset);
if (rv) {
dev_err(cl_data_to_dev(client_data),
"client connect fail\n");
- goto err_cl_unlink;
+ goto err_cl_disconnect;
}
ishtp_register_event_cb(client_data->cl_device, ish_event_cb);
return 0;
-err_cl_unlink:
- ishtp_cl_unlink(cros_ish_cl);
+err_cl_disconnect:
+ ishtp_cl_destroy_connection(cros_ish_cl, reset);
return rv;
}
@@ -427,10 +405,7 @@ static int cros_ish_init(struct ishtp_cl *cros_ish_cl)
*/
static void cros_ish_deinit(struct ishtp_cl *cros_ish_cl)
{
- ishtp_set_connection_state(cros_ish_cl, ISHTP_CL_DISCONNECTING);
- ishtp_cl_disconnect(cros_ish_cl);
- ishtp_cl_unlink(cros_ish_cl);
- ishtp_cl_flush_queues(cros_ish_cl);
+ ishtp_cl_destroy_connection(cros_ish_cl, false);
/* Disband and free all Tx and Rx client-level rings */
ishtp_cl_free(cros_ish_cl);
@@ -592,7 +567,6 @@ static void reset_handler(struct work_struct *work)
int rv;
struct device *dev;
struct ishtp_cl *cros_ish_cl;
- struct ishtp_cl_device *cl_device;
struct ishtp_cl_data *client_data =
container_of(work, struct ishtp_cl_data, work_ishtp_reset);
@@ -600,26 +574,11 @@ static void reset_handler(struct work_struct *work)
down_write(&init_lock);
cros_ish_cl = client_data->cros_ish_cl;
- cl_device = client_data->cl_device;
- /* Unlink, flush queues & start again */
- ishtp_cl_unlink(cros_ish_cl);
- ishtp_cl_flush_queues(cros_ish_cl);
- ishtp_cl_free(cros_ish_cl);
-
- cros_ish_cl = ishtp_cl_allocate(cl_device);
- if (!cros_ish_cl) {
- up_write(&init_lock);
- return;
- }
-
- ishtp_set_drvdata(cl_device, cros_ish_cl);
- ishtp_set_client_data(cros_ish_cl, client_data);
- client_data->cros_ish_cl = cros_ish_cl;
+ ishtp_cl_destroy_connection(cros_ish_cl, true);
- rv = cros_ish_init(cros_ish_cl);
+ rv = cros_ish_init(cros_ish_cl, true);
if (rv) {
- ishtp_cl_free(cros_ish_cl);
dev_err(cl_data_to_dev(client_data), "Reset Failed\n");
up_write(&init_lock);
return;
@@ -672,7 +631,7 @@ static int cros_ec_ishtp_probe(struct ishtp_cl_device *cl_device)
INIT_WORK(&client_data->work_ec_evt,
ish_evt_handler);
- rv = cros_ish_init(cros_ish_cl);
+ rv = cros_ish_init(cros_ish_cl, false);
if (rv)
goto end_ishtp_cl_init_error;
@@ -690,10 +649,7 @@ static int cros_ec_ishtp_probe(struct ishtp_cl_device *cl_device)
return 0;
end_cros_ec_dev_init_error:
- ishtp_set_connection_state(cros_ish_cl, ISHTP_CL_DISCONNECTING);
- ishtp_cl_disconnect(cros_ish_cl);
- ishtp_cl_unlink(cros_ish_cl);
- ishtp_cl_flush_queues(cros_ish_cl);
+ ishtp_cl_destroy_connection(cros_ish_cl, false);
ishtp_put_device(cl_device);
end_ishtp_cl_init_error:
ishtp_cl_free(cros_ish_cl);
--
2.7.4
next prev parent reply other threads:[~2023-12-05 1:51 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-05 1:50 [PATCH 0/4] Simplify ISHTP client interface Even Xu
2023-12-05 1:50 ` [PATCH 1/4] HID: Intel-ish-hid: Ishtp: Add helper functions for client connection Even Xu
2023-12-05 1:50 ` [PATCH 2/4] HID: intel-ish-hid: ishtp-hid-client: use helper functions for connection Even Xu
2023-12-05 1:50 ` [PATCH 3/4] HID: intel-ish-hid: ishtp-fw-loader: " Even Xu
2023-12-05 1:50 ` Even Xu [this message]
2023-12-06 3:33 ` [PATCH 4/4] platform: chrome: cros_ec_ishtp: " Tzung-Bi Shih
2023-12-06 3:53 ` Xu, Even
2023-12-06 10:34 ` Jiri Kosina
2023-12-08 0:38 ` Xu, Even
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1701741033-26222-5-git-send-email-even.xu@intel.com \
--to=even.xu@intel.com \
--cc=bleung@chromium.org \
--cc=chrome-platform@lists.linux.dev \
--cc=groeck@chromium.org \
--cc=jikos@kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=srinivas.pandruvada@linux.intel.com \
--cc=tzungbi@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).