Re: [PATCH v2 06/12] dt-bindings: net/can: Add serial (serdev) LIN adapter

["Rob Herring (Arm)" <robh@kernel.org>]

On Thu, 02 May 2024 09:55:28 +0200, Christoph Fritz wrote:
> This patch adds dt-bindings for serial LIN bus adapters. These adapters are
> basically just LIN transceivers that get hard-wired with serial devices.
> 
> Signed-off-by: Christoph Fritz <christoph.fritz@hexdev.de>
> ---
>  .../bindings/net/can/hexdev,lin-serdev.yaml   | 32 +++++++++++++++++++
>  1 file changed, 32 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/net/can/hexdev,lin-serdev.yaml
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/net/can/hexdev,lin-serdev.example.dtb: /example-0/serial/linbus: failed to match any schema with compatible: ['linux,lin-serdev']

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240502075534.882628-7-christoph.fritz@hexdev.de

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.