From: "Péter Ujfalusi" <peter.ujfalusi@ti.com>
To: alsa-devel@alsa-project.org
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>,
Samuel Ortiz <sameo@linux.intel.com>,
Tony Lindgren <tony@atomide.com>,
Dmitry Torokhov <dmitry.torokhov@gmail.com>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"linux-input@vger.kernel.org" <linux-input@vger.kernel.org>,
"linux-omap@vger.kernel.org" <linux-omap@vger.kernel.org>,
"Girdwood, Liam" <lrg@ti.com>
Subject: Re: [PATCH v6 00/18] MFD/ASoC/Input: TWL4030/TWL60X0 changes
Date: Thu, 30 Jun 2011 09:15:08 +0300 [thread overview]
Message-ID: <1764311.fyKV9VEiMM@barack> (raw)
In-Reply-To: <1770658.gTOGV79JgY@barack>
Hi Samuel,
Would you be able to take a look at this series?
I already have the rebased version on top of linux-omap/devel-cleanup branch
as Tony requested, and I'm now waiting for your comments.
Thank you,
Péter
On Monday 27 June 2011 11:43:57 Ujfalusi, Peter wrote:
> Hi Tony, Samuel,
>
> Would you have time to take a look at this series?
>
> Thanks,
> Péter
>
> On Tuesday 21 June 2011 15:38:58 Ujfalusi, Peter wrote:
> > Hello,
> >
> > Changes since v5:
> > - Use alloc_workqueue in the twl6040-vibra driver (comment from Tejun
> > Heo) - Allow user to change the headset power mode, but if the change
> > is not allowed by the use case the change is not written to the HW
> > (comment from Mark Brown)
> >
> > Mark: I have added your acks for the patches, except for patch 15, where
> > you requested a change.
> >
> > Intro message from the v5 series:
> > The series will do five major things, and they are in one series,
> > because
> > they pretty much depending on each other, so it is easier to handle them
> > together.
> >
> > 1. Move the common pmic related configurations out from the board files.
> > New twl-common.c/h file has been created for this purpose.
> > OMAP3 board files received two patches (pdata, and regualtor changes),
> > OMAP4 board files has been changed with one patch.
> >
> > 2. Rename the twl4030-codec MFD driver to twl4030-audio
> > Since the ASoC multicomponent introduction (2.6.37) the twl4030-codec
> > MFD
> > dirver had been using twl4030-audio to register (twl4030-codec is the
> > ASoC codec driver). The documentation refers to this part of twl as
> > audio block, so it is better to rename the driver as well to avoid
> > confusion.
> >
> > 3. Introduction of MFD driver for twl6040.
> > The TWL6040 audio IC has codec and vibra functionality.
> > Convert the existing ASoC codec driver to use the new MFD driver's
> > interface.
> >
> > 4. Vibrator driver for TWL6040 (Input/ForceFeedback driver)
> > The driver itself, and support for the vibrators in SDP4430 board.
> >
> > 5. Updates for twl6040 ASoC codec driver
> > HS ramp configuration, new ABE dais, updated sample rate constraints,
> > SDP4430 configuration.
> >
> > Regards,
> > Peter
> >
> > ---
> >
> > Axel Castaneda Gonzalez (1):
> > ASoC: twl6040: Configure ramp step based on platform
> >
> > Liam Girdwood (3):
> > ASoC: twl6040: add all ABE DAIs
> > ASoC: twl6040: Support other sample rates in constraints.
> > ASoC: twl6040: set default constraints.
> >
> > Misael Lopez Cruz (5):
> > mfd: twl6040: Add initial support
> > ASoC: twl6040: Convert into TWL6040 MFD child
> > input: Add initial support for TWL6040 vibrator
> > ASoC: twl6040: Remove pll and headset mode dependency
> > OMAP4: SDP4430: Add twl6040 codec platform support
> >
> > Peter Ujfalusi (9):
> > OMAP: New twl-common for common TWL configuration
> > OMAP4: Move common twl6030 configuration to twl-common
> > OMAP3: Move common twl configuration to twl-common
> > OMAP3: Move common regulator configuration to twl-common
> > MFD: twl4030-codec: Rename internals from codec to audio
> > MFD: twl4030-codec -> twl4030-audio: Rename the driver
> > MFD: twl4030-audio: Rename platform data
> > MFD: twl6040: Change platform data for soc codec driver
> > OMAP4: SDP4430: Add twl6040 vibrator platform support
> >
> > arch/arm/mach-omap2/Makefile | 2 +-
> > arch/arm/mach-omap2/board-3430sdp.c | 89 +---
> > arch/arm/mach-omap2/board-4430sdp.c | 187 ++----
> > arch/arm/mach-omap2/board-cm-t35.c | 48 +--
> > arch/arm/mach-omap2/board-devkit8000.c | 37 +--
> > arch/arm/mach-omap2/board-igep0020.c | 44 +--
> > arch/arm/mach-omap2/board-ldp.c | 15 +-
> > arch/arm/mach-omap2/board-omap3beagle.c | 60 +--
> > arch/arm/mach-omap2/board-omap3evm.c | 67 +--
> > arch/arm/mach-omap2/board-omap3pandora.c | 59 +--
> > arch/arm/mach-omap2/board-omap3stalker.c | 70 +--
> > arch/arm/mach-omap2/board-omap3touchbook.c | 57 +--
> > arch/arm/mach-omap2/board-omap4panda.c | 149 +-----
> > arch/arm/mach-omap2/board-overo.c | 59 +--
> > arch/arm/mach-omap2/board-rm680.c | 8 +-
> > arch/arm/mach-omap2/board-rx51-peripherals.c | 44 +--
> > arch/arm/mach-omap2/board-zoom-peripherals.c | 88 +---
> > arch/arm/mach-omap2/common-board-devices.c | 21 -
> > arch/arm/mach-omap2/common-board-devices.h | 26 +-
> > arch/arm/mach-omap2/twl-common.c | 304 ++++++++++
> > arch/arm/mach-omap2/twl-common.h | 59 ++
> > arch/arm/plat-omap/include/plat/irqs.h | 12 +-
> > drivers/input/misc/Kconfig | 13 +-
> > drivers/input/misc/Makefile | 1 +
> > drivers/input/misc/twl4030-vibra.c | 12 +-
> > drivers/input/misc/twl6040-vibra.c | 416
> > +++++++++++++
> > drivers/mfd/Kconfig | 8 +-
> > drivers/mfd/Makefile | 3 +-
> > drivers/mfd/twl-core.c | 13 +-
> > drivers/mfd/twl4030-audio.c | 277 +++++++++
> > drivers/mfd/twl4030-codec.c | 277 ---------
> > drivers/mfd/twl6040-core.c | 601
> >
> > +++++++++++++++++++ drivers/mfd/twl6040-irq.c |
> > 205 +++++++ include/linux/i2c/twl.h | 25 +-
> >
> > .../linux/mfd/{twl4030-codec.h => twl4030-audio.h} | 16 +-
> > include/linux/mfd/twl6040.h | 261 ++++++++
> > sound/soc/codecs/Kconfig | 3 +-
> > sound/soc/codecs/twl4030.c | 22 +-
> > sound/soc/codecs/twl6040.c | 628
> >
> > ++++++++------------ sound/soc/codecs/twl6040.h
> > |
> > 118 ----
> >
> > sound/soc/omap/sdp3430.c | 2 +-
> > sound/soc/omap/sdp4430.c | 2 +
> > sound/soc/omap/zoom2.c | 2 +-
> > 43 files changed, 2635 insertions(+), 1775 deletions(-)
> > create mode 100644 arch/arm/mach-omap2/twl-common.c
> > create mode 100644 arch/arm/mach-omap2/twl-common.h
> > create mode 100644 drivers/input/misc/twl6040-vibra.c
> > create mode 100644 drivers/mfd/twl4030-audio.c
> > delete mode 100644 drivers/mfd/twl4030-codec.c
> > create mode 100644 drivers/mfd/twl6040-core.c
> > create mode 100644 drivers/mfd/twl6040-irq.c
> > rename include/linux/mfd/{twl4030-codec.h => twl4030-audio.h} (96%)
> > create mode 100644 include/linux/mfd/twl6040.h
>
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel@alsa-project.org
> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
next prev parent reply other threads:[~2011-06-30 6:15 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-06-21 13:38 [PATCH v6 00/18] MFD/ASoC/Input: TWL4030/TWL60X0 changes Peter Ujfalusi
2011-06-21 13:38 ` [PATCH v6 01/18] OMAP: New twl-common for common TWL configuration Peter Ujfalusi
2011-06-21 13:39 ` [PATCH v6 02/18] OMAP4: Move common twl6030 configuration to twl-common Peter Ujfalusi
2011-06-21 13:39 ` [PATCH v6 03/18] OMAP3: Move common twl " Peter Ujfalusi
2011-06-21 13:39 ` [PATCH v6 04/18] OMAP3: Move common regulator " Peter Ujfalusi
2011-06-21 13:39 ` [PATCH v6 05/18] MFD: twl4030-codec: Rename internals from codec to audio Peter Ujfalusi
2011-06-21 13:39 ` [PATCH v6 06/18] MFD: twl4030-codec -> twl4030-audio: Rename the driver Peter Ujfalusi
2011-06-21 13:39 ` [PATCH v6 07/18] MFD: twl4030-audio: Rename platform data Peter Ujfalusi
2011-06-21 13:39 ` [PATCH v6 08/18] mfd: twl6040: Add initial support Peter Ujfalusi
2011-07-04 11:48 ` Samuel Ortiz
2011-07-04 13:11 ` Péter Ujfalusi
2011-07-04 14:08 ` Péter Ujfalusi
2011-07-04 17:39 ` Samuel Ortiz
2011-07-05 9:28 ` Péter Ujfalusi
2011-07-04 12:53 ` Felipe Balbi
2011-07-04 13:09 ` Péter Ujfalusi
2011-07-04 13:27 ` Felipe Balbi
2011-06-21 13:39 ` [PATCH v6 09/18] ASoC: twl6040: Convert into TWL6040 MFD child Peter Ujfalusi
2011-06-21 13:39 ` [PATCH v6 10/18] MFD: twl6040: Change platform data for soc codec driver Peter Ujfalusi
2011-06-21 13:39 ` [PATCH v6 11/18] input: Add initial support for TWL6040 vibrator Peter Ujfalusi
2011-06-21 20:32 ` Dmitry Torokhov
2011-06-22 11:37 ` Péter Ujfalusi
2011-06-21 13:39 ` [PATCH v6 12/18] OMAP4: SDP4430: Add twl6040 vibrator platform support Peter Ujfalusi
2011-06-21 13:39 ` [PATCH v6 13/18] ASoC: twl6040: add all ABE DAIs Peter Ujfalusi
2011-06-21 13:39 ` [PATCH v6 14/18] ASoC: twl6040: Support other sample rates in constraints Peter Ujfalusi
2011-06-21 13:39 ` [PATCH v6 15/18] ASoC: twl6040: Remove pll and headset mode dependency Peter Ujfalusi
2011-06-21 17:35 ` Mark Brown
2011-06-22 11:39 ` Péter Ujfalusi
2011-06-21 13:39 ` [PATCH v6 16/18] ASoC: twl6040: set default constraints Peter Ujfalusi
2011-06-21 13:39 ` [PATCH v6 17/18] ASoC: twl6040: Configure ramp step based on platform Peter Ujfalusi
2011-06-22 11:25 ` [PATCH v6 18/18] OMAP4: SDP4430: Add twl6040 codec platform support Peter Ujfalusi
2011-06-27 9:43 ` [PATCH v6 00/18] MFD/ASoC/Input: TWL4030/TWL60X0 changes Péter Ujfalusi
2011-06-27 10:18 ` Tony Lindgren
2011-06-27 14:30 ` Péter Ujfalusi
2011-06-28 6:17 ` Tony Lindgren
2011-06-28 6:44 ` Péter Ujfalusi
2011-06-28 6:50 ` Tony Lindgren
2011-07-04 11:51 ` Samuel Ortiz
2011-06-30 6:15 ` Péter Ujfalusi [this message]
2011-06-30 8:04 ` Re: [alsa-devel] " Samuel Ortiz
2011-06-30 9:41 ` Péter Ujfalusi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1764311.fyKV9VEiMM@barack \
--to=peter.ujfalusi@ti.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=dmitry.torokhov@gmail.com \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=lrg@ti.com \
--cc=sameo@linux.intel.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).