From: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
To: linux-input@vger.kernel.org
Cc: dmitry.torokhov@gmail.com, dtor@mail.ru
Subject: [PATCH] new driver for SGI Indy volume buttons
Date: Fri, 11 Jul 2008 20:34:35 +0200 (CEST) [thread overview]
Message-ID: <20080711183435.4C53AC2EBF@solo.franken.de> (raw)
This driver adds support for the volume buttons on the front of every
SGI Indy workstation.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
---
Please apply for 2.6.27.
drivers/input/misc/Kconfig | 10 +++
drivers/input/misc/Makefile | 1 +
drivers/input/misc/sgi_indy_btns.c | 154 ++++++++++++++++++++++++++++++++++++
3 files changed, 165 insertions(+), 0 deletions(-)
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 432699d..6c9d545 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -189,6 +189,16 @@ config INPUT_UINPUT
To compile this driver as a module, choose M here: the
module will be called uinput.
+config INPUT_SGI_INDY_BTNS
+ tristate "SGI Indy volume button interface"
+ depends on SGI_IP22
+ select INPUT_POLLDEV
+ help
+ Say Y here if you want to support SGI Indy volume button interface.
+
+ To compile this driver as a module, choose M here: the
+ module will be called sgi_indy_btns.
+
config HP_SDC_RTC
tristate "HP SDC Real Time Clock"
depends on GSC || HP300
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index ebd39f2..b86360e 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -19,3 +19,4 @@ obj-$(CONFIG_INPUT_YEALINK) += yealink.o
obj-$(CONFIG_HP_SDC_RTC) += hp_sdc_rtc.o
obj-$(CONFIG_INPUT_UINPUT) += uinput.o
obj-$(CONFIG_INPUT_APANEL) += apanel.o
+obj-$(CONFIG_INPUT_SGI_INDY_BTNS) += sgi_indy_btns.o
diff --git a/drivers/input/misc/sgi_indy_btns.c b/drivers/input/misc/sgi_indy_btns.c
new file mode 100644
index 0000000..15f891a
--- /dev/null
+++ b/drivers/input/misc/sgi_indy_btns.c
@@ -0,0 +1,154 @@
+/*
+ * SGI Indy Volume Button interface driver
+ *
+ * Copyright (C) 2008 Thomas Bogendoerfer <tsbogend@alpha.franken.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+#include <linux/init.h>
+#include <linux/input-polldev.h>
+#include <linux/ioport.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <asm/sgi/ioc.h>
+
+#define BUTTONS_POLL_INTERVAL 30 /* msec */
+#define BUTTONS_COUNT_THRESHOLD 3
+
+static const unsigned short sgi_indy_map[] = {
+ KEY_VOLUMEDOWN,
+ KEY_VOLUMEUP
+};
+
+struct buttons_dev {
+ struct input_polled_dev *poll_dev;
+ unsigned short keymap[ARRAY_SIZE(sgi_indy_map)];
+ int count[ARRAY_SIZE(sgi_indy_map)];
+ void __iomem *reg;
+};
+
+static void handle_buttons(struct input_polled_dev *dev)
+{
+ struct buttons_dev *bdev = dev->private;
+ struct input_dev *input = dev->input;
+ u8 status;
+ int i;
+
+ status = readb(&sgioc->panel) ^ 0xa0;
+ status = ((status & 0x80) >> 7) | ((status & 0x20) >> 5);
+
+ for (i = 0; i < ARRAY_SIZE(bdev->keymap); i++) {
+ if (status & (1U << i)) {
+ if (++bdev->count[i] == BUTTONS_COUNT_THRESHOLD) {
+ input_event(input, EV_MSC, MSC_SCAN, i);
+ input_report_key(input, bdev->keymap[i], 1);
+ input_sync(input);
+ }
+ } else {
+ if (bdev->count[i] >= BUTTONS_COUNT_THRESHOLD) {
+ input_event(input, EV_MSC, MSC_SCAN, i);
+ input_report_key(input, bdev->keymap[i], 0);
+ input_sync(input);
+ }
+ bdev->count[i] = 0;
+ }
+ }
+}
+
+static int __devinit sgi_indy_buttons_probe(struct platform_device *pdev)
+{
+ struct buttons_dev *bdev;
+ struct input_polled_dev *poll_dev;
+ struct input_dev *input;
+ int error, i;
+
+ bdev = kzalloc(sizeof(struct buttons_dev), GFP_KERNEL);
+ poll_dev = input_allocate_polled_device();
+ if (!bdev || !poll_dev) {
+ error = -ENOMEM;
+ goto err_free_mem;
+ }
+
+ memcpy(bdev->keymap, sgi_indy_map, sizeof(bdev->keymap));
+
+ poll_dev->private = bdev;
+ poll_dev->poll = handle_buttons;
+ poll_dev->poll_interval = BUTTONS_POLL_INTERVAL;
+
+ input = poll_dev->input;
+ input->name = "SGI Indy buttons";
+ input->phys = "indy/input0";
+ input->id.bustype = BUS_HOST;
+ input->dev.parent = &pdev->dev;
+
+ input->keycode = bdev->keymap;
+ input->keycodemax = ARRAY_SIZE(bdev->keymap);
+ input->keycodesize = sizeof(unsigned short);
+
+ input_set_capability(input, EV_MSC, MSC_SCAN);
+ __set_bit(EV_KEY, input->evbit);
+ for (i = 0; i < ARRAY_SIZE(sgi_indy_map); i++)
+ __set_bit(bdev->keymap[i], input->keybit);
+ __clear_bit(KEY_RESERVED, input->keybit);
+
+ bdev->poll_dev = poll_dev;
+ dev_set_drvdata(&pdev->dev, bdev);
+
+ error = input_register_polled_device(poll_dev);
+ if (!error)
+ return 0;
+
+ err_free_mem:
+ input_free_polled_device(poll_dev);
+ kfree(bdev);
+ dev_set_drvdata(&pdev->dev, NULL);
+ return error;
+}
+
+static int __devexit sgi_indy_buttons_remove(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct buttons_dev *bdev = dev_get_drvdata(dev);
+
+ input_unregister_polled_device(bdev->poll_dev);
+ input_free_polled_device(bdev->poll_dev);
+ kfree(bdev);
+ dev_set_drvdata(dev, NULL);
+
+ return 0;
+}
+
+static struct platform_driver sgi_indy_buttons_driver = {
+ .probe = sgi_indy_buttons_probe,
+ .remove = __devexit_p(sgi_indy_buttons_remove),
+ .driver = {
+ .name = "sgiindybtns",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init sgi_indy_buttons_init(void)
+{
+ return platform_driver_register(&sgi_indy_buttons_driver);
+}
+
+static void __exit sgi_indy_buttons_exit(void)
+{
+ platform_driver_unregister(&sgi_indy_buttons_driver);
+}
+
+module_init(sgi_indy_buttons_init);
+module_exit(sgi_indy_buttons_exit);
next reply other threads:[~2008-07-11 18:34 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-07-11 18:34 Thomas Bogendoerfer [this message]
2008-07-14 14:32 ` [PATCH] new driver for SGI Indy volume buttons Dmitry Torokhov
2008-07-14 15:47 ` Thomas Bogendoerfer
2008-07-14 16:33 ` Thomas Bogendoerfer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080711183435.4C53AC2EBF@solo.franken.de \
--to=tsbogend@alpha.franken.de \
--cc=dmitry.torokhov@gmail.com \
--cc=dtor@mail.ru \
--cc=linux-input@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox