From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: Zdenek Kabelac <zdenek.kabelac@gmail.com>,
linux-kernel@vger.kernel.org, linux-input@vger.kernel.org,
Peter Zijlstra <a.p.zijlstra@chello.nl>
Subject: Re: INFO: possible recursive locking detected ps2_command
Date: Thu, 31 Jul 2008 23:04:44 -0400 [thread overview]
Message-ID: <20080801030444.GB18953@anvil.corenet.prv> (raw)
In-Reply-To: <20080731145739.fe8923be.akpm@linux-foundation.org>
On Thu, Jul 31, 2008 at 02:57:39PM -0700, Andrew Morton wrote:
>
> (cc linux-input)
>
> On Thu, 31 Jul 2008 11:41:25 +0200
> "Zdenek Kabelac" <zdenek.kabelac@gmail.com> wrote:
>
> > Hi
> >
> > During mouse unplugging from psaux connector from the laptops' docking
> > station I've got attached INFO trace.
> > (laptops still has synaptics device)
> >
Dell?
> > Also for unknown reason to me psaux mouse & synaptic device do not
> > work somehow together - is it hw limitation
> > of /dev/input/mice interface?
> > (USB mouse and synaptics do work quite well together)
> >
> > [ INFO: possible recursive locking detected ]
> > 2.6.27-rc1 #48
>
> (it's 2.6.27-rc1)
>
Peter, here is the trace we talked about long time ago. For some reason
lockdep annotation only works once. If reconnect is forced or psmouse
module is reloaded lockdep starts complaining about passthrough port.
> > ---------------------------------------------
> > kseriod/166 is trying to acquire lock:
> > (&ps2dev->cmd_mutex){--..}, at: [<ffffffff8126e9ae>] ps2_command+0x5e/0x460
> >
> > but task is already holding lock:
> > (&ps2dev->cmd_mutex){--..}, at: [<ffffffff8126e9ae>] ps2_command+0x5e/0x460
> >
> > other info that might help us debug this:
> > 4 locks held by kseriod/166:
> > #0: (serio_mutex){--..}, at: [<ffffffff8126cc1e>] serio_thread+0x3e/0x410
> > #1: (&serio->drv_mutex){--..}, at: [<ffffffff8126bf8b>]
> > serio_connect_driver+0x2b/0x50
> > #2: (psmouse_mutex){--..}, at: [<ffffffffa009aa00>]
> > psmouse_connect+0x30/0x2c0 [psmouse]
> > #3: (&ps2dev->cmd_mutex){--..}, at: [<ffffffff8126e9ae>]
> > ps2_command+0x5e/0x460
> >
> > stack backtrace:
> > Pid: 166, comm: kseriod Not tainted 2.6.27-rc1 #48
> >
> > Call Trace:
> > [<ffffffff81068bda>] __lock_acquire+0xcea/0x13b0
> > [<ffffffff81066401>] ? trace_hardirqs_off_caller+0x21/0xc0
> > [<ffffffff810664ad>] ? trace_hardirqs_off+0xd/0x10
> > [<ffffffff8126e9ae>] ? ps2_command+0x5e/0x460
> > [<ffffffff81069336>] lock_acquire+0x96/0xe0
> > [<ffffffff8126e9ae>] ? ps2_command+0x5e/0x460
> > [<ffffffff81313861>] mutex_lock_nested+0xc1/0x340
> > [<ffffffff8126e9ae>] ? ps2_command+0x5e/0x460
> > [<ffffffff810135a0>] ? native_sched_clock+0x90/0xb0
> > [<ffffffff8126e9ae>] ps2_command+0x5e/0x460
> > [<ffffffff81066401>] ? trace_hardirqs_off_caller+0x21/0xc0
> > [<ffffffff81065834>] ? get_lock_stats+0x34/0x70
> > [<ffffffffa009977d>] psmouse_sliced_command+0x2d/0x90 [psmouse]
> > [<ffffffff8126e838>] ? ps2_sendbyte+0x48/0x130
> > [<ffffffffa009b8f7>] synaptics_pt_write+0x27/0x60 [psmouse]
> > [<ffffffff81315acd>] ? _spin_unlock_irq+0x3d/0x80
> > [<ffffffff8126e84d>] ps2_sendbyte+0x5d/0x130
> > [<ffffffff81319840>] ? sub_preempt_count+0x80/0x120
> > [<ffffffff8126ea4d>] ps2_command+0xfd/0x460
> > [<ffffffff81319840>] ? sub_preempt_count+0x80/0x120
> > [<ffffffff81315acd>] ? _spin_unlock_irq+0x3d/0x80
> > [<ffffffffa0099917>] psmouse_probe+0x27/0xa0 [psmouse]
> > [<ffffffff8126c1e1>] ? serio_open+0x11/0x50
> > [<ffffffffa009ab48>] psmouse_connect+0x178/0x2c0 [psmouse]
> > [<ffffffff8126bf96>] serio_connect_driver+0x36/0x50
> > [<ffffffff8126bfcb>] serio_driver_probe+0x1b/0x20
> > [<ffffffff81221112>] driver_probe_device+0xa2/0x1e0
> > [<ffffffff812212e0>] ? __device_attach+0x0/0x10
> > [<ffffffff812212e9>] __device_attach+0x9/0x10
> > [<ffffffff8122050b>] bus_for_each_drv+0x6b/0xa0
> > [<ffffffff812213b8>] device_attach+0x88/0x90
> > [<ffffffff812202d5>] bus_attach_device+0x55/0x80
> > [<ffffffff8121ee99>] device_add+0x4f9/0x610
> > [<ffffffff81319840>] ? sub_preempt_count+0x80/0x120
> > [<ffffffff8126ce1c>] serio_thread+0x23c/0x410
> > [<ffffffff810571a0>] ? autoremove_wake_function+0x0/0x40
> > [<ffffffff8126cbe0>] ? serio_thread+0x0/0x410
> > [<ffffffff81056de9>] kthread+0x49/0x90
> > [<ffffffff8100d669>] child_rip+0xa/0x11
> > [<ffffffff8103b757>] ? finish_task_switch+0x57/0x110
> > [<ffffffff81315acd>] ? _spin_unlock_irq+0x3d/0x80
> > [<ffffffff8100cc73>] ? restore_args+0x0/0x30
> > [<ffffffff810664ad>] ? trace_hardirqs_off+0xd/0x10
> > [<ffffffff81056da0>] ? kthread+0x0/0x90
> > [<ffffffff8100d65f>] ? child_rip+0x0/0x11
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-input" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Dmitry
next prev parent reply other threads:[~2008-08-01 3:04 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <c4e36d110807310241n512b01e4v898e883d740de879@mail.gmail.com>
2008-07-31 21:57 ` INFO: possible recursive locking detected ps2_command Andrew Morton
2008-08-01 3:04 ` Dmitry Torokhov [this message]
2008-08-08 10:49 ` Peter Zijlstra
2008-08-08 12:44 ` Dmitry Torokhov
2009-09-03 22:48 ` Zdenek Kabelac
2009-09-04 3:23 ` Dmitry Torokhov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080801030444.GB18953@anvil.corenet.prv \
--to=dmitry.torokhov@gmail.com \
--cc=a.p.zijlstra@chello.nl \
--cc=akpm@linux-foundation.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=zdenek.kabelac@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).