From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
To: Eric Miao <eric.y.miao@gmail.com>
Cc: linux-input@vger.kernel.org
Subject: Re: [PATCH 1/3] input: add da9034 touchscreen support
Date: Tue, 23 Dec 2008 04:34:29 -0500 [thread overview]
Message-ID: <20081223093428.GD14302@anvil.corenet.prv> (raw)
In-Reply-To: <f17812d70812041810o57726d24j4feabfbe89e7c271@mail.gmail.com>
On Fri, Dec 05, 2008 at 10:10:35AM +0800, Eric Miao wrote:
> From a3259123035102444c5868d825aa06fd9a49fad4 Mon Sep 17 00:00:00 2001
> From: Eric Miao <eric.miao@marvell.com>
> Date: Wed, 3 Dec 2008 13:39:28 +0800
> Subject: [PATCH] input: add da9034 touchscreen support
>
> Add support for the built-in touchscreen controller in DA9034 (aka Micco),
> usually found on platforms with xscale processors.
>
> Signed-off-by: Eric Miao <eric.miao@marvell.com>
Applied with the following changes, thank you Eric.
--
Dmitry
diff --git a/drivers/input/touchscreen/da9034-ts.c b/drivers/input/touchscreen/da9034-ts.c
index 9164d2d..fd00067 100644
--- a/drivers/input/touchscreen/da9034-ts.c
+++ b/drivers/input/touchscreen/da9034-ts.c
@@ -2,8 +2,8 @@
* Touchscreen driver for Dialog Semiconductor DA9034
*
* Copyright (C) 2006-2008 Marvell International Ltd.
- * Fengwei Yin <fengwei.yin@marvell.com>
- * Eric Miao <eric.miao@marvell.com>
+ * Fengwei Yin <fengwei.yin@marvell.com>
+ * Eric Miao <eric.miao@marvell.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -98,6 +98,7 @@ static int read_tsi(struct da9034_touch *touch)
touch->last_x = ((_x << 2) & 0x3fc) | (_v & 0x3);
touch->last_y = ((_y << 2) & 0x3fc) | ((_v & 0xc) >> 2);
+
return 0;
}
@@ -118,12 +119,15 @@ static inline void report_pen_down(struct da9034_touch *touch)
int x = touch->last_x;
int y = touch->last_y;
- x &= 0xfff; x = touch->x_inverted ? (1024 - x) : x;
- y &= 0xfff; y = touch->y_inverted ? (1024 - y) : y;
+ x &= 0xfff;
+ if (touch->x_inverted)
+ x = 1024 - x;
+ y &= 0xfff;
+ if (touch->y_inverted)
+ y = 1024 - y;
input_report_abs(touch->input_dev, ABS_X, x);
input_report_abs(touch->input_dev, ABS_Y, y);
- input_report_abs(touch->input_dev, ABS_PRESSURE, 255);
input_report_key(touch->input_dev, BTN_TOUCH, 1);
input_sync(touch->input_dev);
@@ -131,15 +135,13 @@ static inline void report_pen_down(struct da9034_touch *touch)
static inline void report_pen_up(struct da9034_touch *touch)
{
- input_report_abs(touch->input_dev, ABS_PRESSURE, 0);
input_report_key(touch->input_dev, BTN_TOUCH, 0);
-
input_sync(touch->input_dev);
}
static void da9034_event_handler(struct da9034_touch *touch, int event)
{
- int err = 0;
+ int err;
switch (touch->state) {
case STATE_IDLE:
@@ -163,7 +165,7 @@ static void da9034_event_handler(struct da9034_touch *touch, int event)
err = read_tsi(touch);
if (err)
goto err_reset;
-
+
/* Disable auto measurement of the TSI, so that
* pen down status will be available
*/
@@ -263,6 +265,7 @@ static int da9034_touch_open(struct input_dev *dev)
touch->state = STATE_IDLE;
detect_pen_down(touch, 1);
+
return 0;
}
@@ -290,7 +293,7 @@ static int __devinit da9034_touch_probe(struct platform_device *pdev)
struct da9034_touch_pdata *pdata = pdev->dev.platform_data;
struct da9034_touch *touch;
struct input_dev *input_dev;
- int ret = 0;
+ int ret;
touch = kzalloc(sizeof(struct da9034_touch), GFP_KERNEL);
if (touch == NULL) {
@@ -298,7 +301,7 @@ static int __devinit da9034_touch_probe(struct platform_device *pdev)
return -ENOMEM;
}
- touch->da9034_dev = pdev->dev.parent;
+ touch->da9034_dev = pdev->dev.parent;
if (pdata) {
touch->interval_ms = pdata->interval_ms;
@@ -323,14 +326,14 @@ static int __devinit da9034_touch_probe(struct platform_device *pdev)
input_dev->close = da9034_touch_close;
input_dev->dev.parent = &pdev->dev;
- set_bit(EV_ABS, input_dev->evbit);
- set_bit(ABS_X, input_dev->absbit);
- set_bit(ABS_Y, input_dev->absbit);
- set_bit(ABS_PRESSURE, input_dev->absbit);
-
+ __set_bit(EV_ABS, input_dev->evbit);
+ __set_bit(ABS_X, input_dev->absbit);
+ __set_bit(ABS_Y, input_dev->absbit);
input_set_abs_params(input_dev, ABS_X, 0, 1023, 0, 0);
input_set_abs_params(input_dev, ABS_Y, 0, 1023, 0, 0);
- input_set_abs_params(input_dev, ABS_PRESSURE, 0, 255, 0, 0);
+
+ __set_bit(EV_KEY, input_dev->evbit);
+ __set_bit(BTN_TOUCH, input_dev->keybit);
touch->input_dev = input_dev;
input_set_drvdata(input_dev, touch);
@@ -353,7 +356,7 @@ static int __devexit da9034_touch_remove(struct platform_device *pdev)
{
struct da9034_touch *touch = platform_get_drvdata(pdev);
- input_free_device(touch->input_dev);
+ input_unregister_device(touch->input_dev);
kfree(touch);
return 0;
}
@@ -364,7 +367,7 @@ static struct platform_driver da9034_touch_driver = {
.owner = THIS_MODULE,
},
.probe = da9034_touch_probe,
- .remove = da9034_touch_remove,
+ .remove = __devexit_p(da9034_touch_remove),
};
static int __init da9034_touch_init(void)
next prev parent reply other threads:[~2008-12-23 9:34 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-12-05 2:10 [PATCH 1/3] input: add da9034 touchscreen support Eric Miao
2008-12-05 2:13 ` Eric Miao
2008-12-23 9:34 ` Dmitry Torokhov [this message]
2008-12-23 10:07 ` Eric Miao
2008-12-23 11:17 ` Dmitry Torokhov
2008-12-23 13:16 ` Eric Miao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20081223093428.GD14302@anvil.corenet.prv \
--to=dmitry.torokhov@gmail.com \
--cc=eric.y.miao@gmail.com \
--cc=linux-input@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).