From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
To: Eric Miao <eric.y.miao@gmail.com>
Cc: linux-input@vger.kernel.org
Subject: A few changes to pxa27x_keypad
Date: Tue, 21 Jul 2009 01:08:45 -0700 [thread overview]
Message-ID: <20090721080845.GD10168@dtor-d630.eng.vmware.com> (raw)
Hi Eric,
I made a few adjustments to the pxa27x_keypad driver and was wondering
if you would be able to give it a sping and check if I broke it or not.
Thanks!
--
Dmitry
Input: pxa27x_keypad - remove extra clk_disable
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
clk_disable() in remove method is not needed since we already
have clk_disable in pxa27x_keypad_close().
Also make sure the driver uses resource_size() and helpers from
include/input/matrix_keypad.h
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
arch/arm/mach-pxa/include/mach/pxa27x_keypad.h | 3 +-
drivers/input/keyboard/pxa27x_keypad.c | 43 +++++++++++-------------
2 files changed, 21 insertions(+), 25 deletions(-)
diff --git a/arch/arm/mach-pxa/include/mach/pxa27x_keypad.h b/arch/arm/mach-pxa/include/mach/pxa27x_keypad.h
index d5a48a9..63e8965 100644
--- a/arch/arm/mach-pxa/include/mach/pxa27x_keypad.h
+++ b/arch/arm/mach-pxa/include/mach/pxa27x_keypad.h
@@ -2,6 +2,7 @@
#define __ASM_ARCH_PXA27x_KEYPAD_H
#include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
#define MAX_MATRIX_KEY_ROWS (8)
#define MAX_MATRIX_KEY_COLS (8)
@@ -51,8 +52,6 @@ struct pxa27x_keypad_platform_data {
unsigned int debounce_interval;
};
-#define KEY(row, col, val) (((row) << 28) | ((col) << 24) | (val))
-
extern void pxa_set_keypad_info(struct pxa27x_keypad_platform_data *info);
#endif /* __ASM_ARCH_PXA27x_KEYPAD_H */
diff --git a/drivers/input/keyboard/pxa27x_keypad.c b/drivers/input/keyboard/pxa27x_keypad.c
index 0d2fc64..0943238 100644
--- a/drivers/input/keyboard/pxa27x_keypad.c
+++ b/drivers/input/keyboard/pxa27x_keypad.c
@@ -25,6 +25,7 @@
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/err.h>
+#include <linux/input/matrix_keypad.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -107,7 +108,7 @@ struct pxa27x_keypad {
int irq;
/* matrix key code map */
- unsigned int matrix_keycodes[MAX_MATRIX_KEY_NUM];
+ unsigned short matrix_keycodes[MAX_MATRIX_KEY_NUM];
/* state row bits of each column scan */
uint32_t matrix_key_state[MAX_MATRIX_KEY_COLS];
@@ -124,21 +125,21 @@ static void pxa27x_keypad_build_keycode(struct pxa27x_keypad *keypad)
{
struct pxa27x_keypad_platform_data *pdata = keypad->pdata;
struct input_dev *input_dev = keypad->input_dev;
- unsigned int *key;
int i;
- key = &pdata->matrix_key_map[0];
- for (i = 0; i < pdata->matrix_key_map_size; i++, key++) {
- int row = ((*key) >> 28) & 0xf;
- int col = ((*key) >> 24) & 0xf;
- int code = (*key) & 0xffffff;
+ for (i = 0; i < pdata->matrix_key_map_size; i++) {
+ unsigned int key = pdata->matrix_key_map[i];
+ unsigned int row = KEY_ROW(key);
+ unsigned int col = KEY_COL(key);
+ unsigned short code = KEY_VAL(key);
keypad->matrix_keycodes[(row << 3) + col] = code;
- set_bit(code, input_dev->keybit);
+ __set_bit(code, input_dev->keybit);
}
+ __clear_bit(KEY_RESERVED, input_dev->keybit);
for (i = 0; i < pdata->direct_key_num; i++)
- set_bit(pdata->direct_key_map[i], input_dev->keybit);
+ __set_bit(pdata->direct_key_map[i], input_dev->keybit);
keypad->rotary_up_key[0] = pdata->rotary0_up_key;
keypad->rotary_up_key[1] = pdata->rotary1_up_key;
@@ -149,18 +150,18 @@ static void pxa27x_keypad_build_keycode(struct pxa27x_keypad *keypad)
if (pdata->enable_rotary0) {
if (pdata->rotary0_up_key && pdata->rotary0_down_key) {
- set_bit(pdata->rotary0_up_key, input_dev->keybit);
- set_bit(pdata->rotary0_down_key, input_dev->keybit);
+ __set_bit(pdata->rotary0_up_key, input_dev->keybit);
+ __set_bit(pdata->rotary0_down_key, input_dev->keybit);
} else
- set_bit(pdata->rotary0_rel_code, input_dev->relbit);
+ __set_bit(pdata->rotary0_rel_code, input_dev->relbit);
}
if (pdata->enable_rotary1) {
if (pdata->rotary1_up_key && pdata->rotary1_down_key) {
- set_bit(pdata->rotary1_up_key, input_dev->keybit);
- set_bit(pdata->rotary1_down_key, input_dev->keybit);
+ __set_bit(pdata->rotary1_up_key, input_dev->keybit);
+ __set_bit(pdata->rotary1_down_key, input_dev->keybit);
} else
- set_bit(pdata->rotary1_rel_code, input_dev->relbit);
+ __set_bit(pdata->rotary1_rel_code, input_dev->relbit);
}
}
@@ -425,8 +426,6 @@ static int pxa27x_keypad_resume(struct platform_device *pdev)
#define pxa27x_keypad_resume NULL
#endif
-#define res_size(res) ((res)->end - (res)->start + 1)
-
static int __devinit pxa27x_keypad_probe(struct platform_device *pdev)
{
struct pxa27x_keypad *keypad;
@@ -461,14 +460,14 @@ static int __devinit pxa27x_keypad_probe(struct platform_device *pdev)
goto failed_free;
}
- res = request_mem_region(res->start, res_size(res), pdev->name);
+ res = request_mem_region(res->start, resource_size(res), pdev->name);
if (res == NULL) {
dev_err(&pdev->dev, "failed to request I/O memory\n");
error = -EBUSY;
goto failed_free;
}
- keypad->mmio_base = ioremap(res->start, res_size(res));
+ keypad->mmio_base = ioremap(res->start, resource_size(res));
if (keypad->mmio_base == NULL) {
dev_err(&pdev->dev, "failed to remap I/O memory\n");
error = -ENXIO;
@@ -540,7 +539,7 @@ failed_put_clk:
failed_free_io:
iounmap(keypad->mmio_base);
failed_free_mem:
- release_mem_region(res->start, res_size(res));
+ release_mem_region(res->start, resource_size(res));
failed_free:
kfree(keypad);
return error;
@@ -552,8 +551,6 @@ static int __devexit pxa27x_keypad_remove(struct platform_device *pdev)
struct resource *res;
free_irq(keypad->irq, pdev);
-
- clk_disable(keypad->clk);
clk_put(keypad->clk);
input_unregister_device(keypad->input_dev);
@@ -562,7 +559,7 @@ static int __devexit pxa27x_keypad_remove(struct platform_device *pdev)
iounmap(keypad->mmio_base);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- release_mem_region(res->start, res_size(res));
+ release_mem_region(res->start, resource_size(res));
platform_set_drvdata(pdev, NULL);
kfree(keypad);
next reply other threads:[~2009-07-21 8:08 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-07-21 8:08 Dmitry Torokhov [this message]
2009-07-21 10:44 ` A few changes to pxa27x_keypad Mike Rapoport
2009-07-23 6:30 ` Dmitry Torokhov
2009-07-23 7:28 ` Dmitry Torokhov
2009-07-23 7:36 ` Dmitry Torokhov
2009-09-04 5:20 ` Dmitry Torokhov
2009-09-04 7:45 ` Eric Miao
2009-09-04 8:17 ` Dmitry Torokhov
2009-07-23 9:05 ` Mike Rapoport
2009-07-23 9:24 ` Dmitry Torokhov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090721080845.GD10168@dtor-d630.eng.vmware.com \
--to=dmitry.torokhov@gmail.com \
--cc=eric.y.miao@gmail.com \
--cc=linux-input@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).