* Re: Current git: no keyboard when booting in verbose mode
[not found] <6041d2000909221754n2ee1982xe08f938a35358c00@mail.gmail.com>
@ 2009-09-23 9:09 ` Jiri Kosina
2009-09-23 12:16 ` Marc Dionne
0 siblings, 1 reply; 3+ messages in thread
From: Jiri Kosina @ 2009-09-23 9:09 UTC (permalink / raw)
To: Marc Dionne; +Cc: linux-kernel, linux-input, Dmitry Torokhov
[ adding some CCs ]
On Tue, 22 Sep 2009, Marc Dionne wrote:
> I'm having issues with the current kernel in git, and wondering if this
> will ring a bell for anyone. The main symptom is that on most boots the
> keyboard is not detected - the system gets to the console login prompt
> but input is not recognized. Sometimes (rarely) the keyboard will be ok
> at the console, but the keyboard and mouse are non functional once in X.
Are both keyboard and mouse in question PS/2?
> Other times the system will hang before getting to the console login
> prompt.
>
> I made a few attempts to bisect this but with no success - I assume
> that I'm led astray at some point by a bad kernel that happens to boot
> normally a few times.
>
> Things to note:
> - The problem only occurs in verbose mode - if I boot with "quiet"
> everything is fine
> - 2.6.31 has no issues on the same machine
> - On a failed boot with no keyboard, this line is missing from dmesg:
> AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
Could you please provide output from kernel booted with 'i8042.debug' from
the failing case?
> - Otherwise there are no obvious differences with dmesg from a successful boot.
>
> config is attached
--
Jiri Kosina
SUSE Labs, Novell Inc.
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: Current git: no keyboard when booting in verbose mode
2009-09-23 9:09 ` Current git: no keyboard when booting in verbose mode Jiri Kosina
@ 2009-09-23 12:16 ` Marc Dionne
2009-09-23 16:44 ` Dmitry Torokhov
0 siblings, 1 reply; 3+ messages in thread
From: Marc Dionne @ 2009-09-23 12:16 UTC (permalink / raw)
To: Jiri Kosina; +Cc: linux-kernel, linux-input, Dmitry Torokhov
[-- Attachment #1: Type: text/plain, Size: 1057 bytes --]
On Wed, Sep 23, 2009 at 5:09 AM, Jiri Kosina <jkosina@suse.cz> wrote:
>
> [ adding some CCs ]
>
> On Tue, 22 Sep 2009, Marc Dionne wrote:
>
>> I'm having issues with the current kernel in git, and wondering if this
>> will ring a bell for anyone. The main symptom is that on most boots the
>> keyboard is not detected - the system gets to the console login prompt
>> but input is not recognized. Sometimes (rarely) the keyboard will be ok
>> at the console, but the keyboard and mouse are non functional once in X.
>
> Are both keyboard and mouse in question PS/2?
No - keyboard is PS/2 but the mouse is USB.
>> - On a failed boot with no keyboard, this line is missing from dmesg:
>> AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
>
> Could you please provide output from kernel booted with 'i8042.debug' from
> the failing case?
Attached are the dmesg output for a successful boot (with "quiet") and
a failed one. I see that the i8042.debug output is quite different
for the 2 cases.
Marc
[-- Attachment #2: good_i8042 --]
[-- Type: application/octet-stream, Size: 77856 bytes --]
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.31-marco (root@tornado) (gcc version 4.4.1 20090918 (Red Hat 4.4.1-15) (GCC) ) #39 SMP Tue Sep 22 19:00:40 EDT 2009
Command line: ro root=UUID=2013c140-3e2e-4b04-aaa0-86893fba78df vga=0x31b 3 selinux=1 i8042.debug quiet rhgb
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bf780000 (usable)
BIOS-e820: 00000000bf780000 - 00000000bf78e000 (ACPI data)
BIOS-e820: 00000000bf78e000 - 00000000bf7d0000 (ACPI NVS)
BIOS-e820: 00000000bf7d0000 - 00000000bf7e0000 (reserved)
BIOS-e820: 00000000bf7ec000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 00000001c0000000 (usable)
DMI present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
last_pfn = 0x1c0000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-DFFFF uncachable
E0000-E3FFF write-protect
E4000-EFFFF write-through
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 1C0000000 mask FC0000000 uncachable
1 base 000000000 mask E00000000 write-back
2 base 0C0000000 mask FC0000000 uncachable
3 base 0BF800000 mask FFF800000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 7GB, range: 1GB, type UC
reg 1, base: 0GB, range: 8GB, type WB
reg 2, base: 3GB, range: 1GB, type UC
reg 3, base: 3064MB, range: 8MB, type UC
total RAM coverred: 6136M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 16M num_reg: 5 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3064MB, range: 8MB, type UC
reg 3, base: 4GB, range: 2GB, type WB
reg 4, base: 6GB, range: 1GB, type WB
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000bf800000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xbf780 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-00000000bf780000
0000000000 - 00bf600000 page 2M
00bf600000 - 00bf780000 page 4k
kernel direct mapping tables up to bf780000 @ 10000-15000
init_memory_mapping: 0000000100000000-00000001c0000000
0100000000 - 01c0000000 page 2M
kernel direct mapping tables up to 1c0000000 @ 13000-1b000
RAMDISK: 37ca5000 - 37fef6c4
ACPI: RSDP 00000000000fa040 00014 (v00 ACPIAM)
ACPI: RSDT 00000000bf780000 00038 (v01 7593MS A7593100 20090417 MSFT 00000097)
ACPI: FACP 00000000bf780200 00084 (v01 7593MS A7593100 20090417 MSFT 00000097)
ACPI: DSDT 00000000bf780460 06D02 (v01 A7593 A7593100 00000100 INTL 20051117)
ACPI: FACS 00000000bf78e000 00040
ACPI: APIC 00000000bf780390 0008C (v01 7593MS A7593100 20090417 MSFT 00000097)
ACPI: MCFG 00000000bf780420 0003C (v01 7593MS OEMMCFG 20090417 MSFT 00000097)
ACPI: OEMB 00000000bf78e040 0007A (v01 7593MS A7593100 20090417 MSFT 00000097)
ACPI: SSDT 00000000bf790140 01298 (v01 DpgPmm CpuPm 00000012 INTL 20051117)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-00000001c0000000
Bootmem setup node 0 0000000000000000-00000001c0000000
NODE_DATA [0000000000016000 - 000000000002afff]
bootmap [000000000002b000 - 0000000000062fff] pages 38
(8 early reservations) ==> bootmem [0000000000 - 01c0000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 0001af5ea0] TEXT DATA BSS ==> [0001000000 - 0001af5ea0]
#3 [0037ca5000 - 0037fef6c4] RAMDISK ==> [0037ca5000 - 0037fef6c4]
#4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
#5 [0001af6000 - 0001af6127] BRK ==> [0001af6000 - 0001af6127]
#6 [0000010000 - 0000013000] PGTABLE ==> [0000010000 - 0000013000]
#7 [0000013000 - 0000016000] PGTABLE ==> [0000013000 - 0000016000]
found SMP MP-table at [ffff8800000ff780] ff780
[ffffea0000000000-ffffea00061fffff] PMD -> [ffff880028600000-ffff88002d9fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x001c0000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x000bf780
0: 0x00100000 -> 0x001c0000
On node 0 totalpages: 1570575
DMA zone: 56 pages used for memmap
DMA zone: 105 pages reserved
DMA zone: 3822 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 765880 pages, LIFO batch:31
Normal zone: 10752 pages used for memmap
Normal zone: 775680 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000bf780000 - 00000000bf78e000
PM: Registered nosave memory: 00000000bf78e000 - 00000000bf7d0000
PM: Registered nosave memory: 00000000bf7d0000 - 00000000bf7e0000
PM: Registered nosave memory: 00000000bf7e0000 - 00000000bf7ec000
PM: Registered nosave memory: 00000000bf7ec000 - 00000000c0000000
PM: Registered nosave memory: 00000000c0000000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ffc00000
PM: Registered nosave memory: 00000000ffc00000 - 0000000100000000
Allocating PCI resources starting at c0000000 (gap: c0000000:3ee00000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 30 pages/cpu @ffff880028200000 s91160 r8192 d23528 u262144
pcpu-alloc: s91160 r8192 d23528 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1545382
Policy zone: Normal
Kernel command line: ro root=UUID=2013c140-3e2e-4b04-aaa0-86893fba78df vga=0x31b 3 selinux=1 i8042.debug quiet rhgb
PID hash table entries: 4096 (order: 3, 32768 bytes)
Initializing CPU#0
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
software IO TLB at phys 0x20000000 - 0x24000000
Memory: 6114384k/7340032k available (5241k kernel code, 1057732k absent, 167916k reserved, 3378k data, 1332k init)
SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:4352 nr_irqs:472
Console: colour dummy device 80x25
console [tty0] enabled
allocated 62914560 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Fast TSC calibration using PIT
Detected 2673.512 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5347.02 BogoMIPS (lpj=2673512)
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 0/0x0 -> Node 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
CPU 0 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6 SHD:8
using mwait in idle threads.
Performance Events: Nehalem/Corei7 events, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
ACPI: Core revision 20090521
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 04
Booting processor 1 APIC 0x2 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 5344.67 BogoMIPS (lpj=2672336)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 1/0x2 -> Node 0
mce: CPU supports 9 MCE banks
CPU1: Thermal monitoring enabled (TM1)
CPU 1 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
CPU1: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 04
Skipping synchronization checks as TSC is reliable.
Booting processor 2 APIC 0x4 ip 0x6000
Initializing CPU#2
Calibrating delay using timer specific routine.. 5344.67 BogoMIPS (lpj=2672337)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 2/0x4 -> Node 0
mce: CPU supports 9 MCE banks
CPU2: Thermal monitoring enabled (TM1)
CPU 2 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
CPU2: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 04
Skipping synchronization checks as TSC is reliable.
Booting processor 3 APIC 0x6 ip 0x6000
Initializing CPU#3
Calibrating delay using timer specific routine.. 5344.67 BogoMIPS (lpj=2672336)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 3
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 3/0x6 -> Node 0
mce: CPU supports 9 MCE banks
CPU3: Thermal monitoring enabled (TM1)
CPU 3 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
CPU3: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 04
Skipping synchronization checks as TSC is reliable.
Booting processor 4 APIC 0x1 ip 0x6000
Initializing CPU#4
Calibrating delay using timer specific routine.. 5344.67 BogoMIPS (lpj=2672337)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 4/0x1 -> Node 0
mce: CPU supports 9 MCE banks
CPU4: Thermal monitoring enabled (TM1)
CPU 4 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
CPU4: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 04
Skipping synchronization checks as TSC is reliable.
Booting processor 5 APIC 0x3 ip 0x6000
Initializing CPU#5
Calibrating delay using timer specific routine.. 5344.67 BogoMIPS (lpj=2672338)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 5/0x3 -> Node 0
mce: CPU supports 9 MCE banks
CPU5: Thermal monitoring enabled (TM1)
CPU 5 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
CPU5: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 04
Skipping synchronization checks as TSC is reliable.
Booting processor 6 APIC 0x5 ip 0x6000
Initializing CPU#6
Calibrating delay using timer specific routine.. 5344.67 BogoMIPS (lpj=2672338)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 6/0x5 -> Node 0
mce: CPU supports 9 MCE banks
CPU6: Thermal monitoring enabled (TM1)
CPU 6 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
CPU6: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 04
Skipping synchronization checks as TSC is reliable.
Booting processor 7 APIC 0x7 ip 0x6000
Initializing CPU#7
Calibrating delay using timer specific routine.. 5387.08 BogoMIPS (lpj=2693541)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 3
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 7/0x7 -> Node 0
mce: CPU supports 9 MCE banks
CPU7: Thermal monitoring enabled (TM1)
CPU 7 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
CPU7: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 04
Skipping synchronization checks as TSC is reliable.
Brought up 8 CPUs
Total of 8 processors activated (42802.15 BogoMIPS).
x86 PAT enabled: cpu 4, old 0x7040600070406, new 0x7010600070106
x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106
x86 PAT enabled: cpu 7, old 0x7040600070406, new 0x7010600070106
x86 PAT enabled: cpu 6, old 0x7040600070406, new 0x7010600070106
x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
x86 PAT enabled: cpu 5, old 0x7040600070406, new 0x7010600070106
CPU0 attaching sched-domain:
domain 0: span 0,4 level SIBLING
groups: 0 (cpu_power = 589) 4 (cpu_power = 589)
domain 1: span 0-7 level MC
groups: 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178)
CPU1 attaching sched-domain:
domain 0: span 1,5 level SIBLING
groups: 1 (cpu_power = 589) 5 (cpu_power = 589)
domain 1: span 0-7 level MC
groups: 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178)
CPU2 attaching sched-domain:
domain 0: span 2,6 level SIBLING
groups: 2 (cpu_power = 589) 6 (cpu_power = 589)
domain 1: span 0-7 level MC
groups: 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178)
CPU3 attaching sched-domain:
domain 0: span 3,7 level SIBLING
groups: 3 (cpu_power = 589) 7 (cpu_power = 589)
domain 1: span 0-7 level MC
groups: 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178)
CPU4 attaching sched-domain:
domain 0: span 0,4 level SIBLING
groups: 4 (cpu_power = 589) 0 (cpu_power = 589)
domain 1: span 0-7 level MC
groups: 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178)
CPU5 attaching sched-domain:
domain 0: span 1,5 level SIBLING
groups: 5 (cpu_power = 589) 1 (cpu_power = 589)
domain 1: span 0-7 level MC
groups: 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178)
CPU6 attaching sched-domain:
domain 0: span 2,6 level SIBLING
groups: 6 (cpu_power = 589) 2 (cpu_power = 589)
domain 1: span 0-7 level MC
groups: 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178)
CPU7 attaching sched-domain:
domain 0: span 3,7 level SIBLING
groups: 7 (cpu_power = 589) 3 (cpu_power = 589)
domain 1: span 0-7 level MC
groups: 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178)
Time: 11:07:45 Date: 09/23/09
NET: Registered protocol family 16
ACPI: bus type pci registered
dca service started, version 1.8
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: Not using MMCONFIG.
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG at e0000000 - efffffff
ACPI Warning: Incorrect checksum in table [OEMB] - B8, should be B7 20090521 tbutils-246
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:00.0: PME# disabled
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:1a.0: reg 20 io port: [0xac00-0xac1f]
pci 0000:00:1a.1: reg 20 io port: [0xa880-0xa89f]
pci 0000:00:1a.2: reg 20 io port: [0xa800-0xa81f]
pci 0000:00:1a.7: reg 10 32bit mmio: [0xf8ffe000-0xf8ffe3ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10 64bit mmio: [0xf8ff8000-0xf8ffbfff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0xa480-0xa49f]
pci 0000:00:1d.1: reg 20 io port: [0xa400-0xa41f]
pci 0000:00:1d.2: reg 20 io port: [0xa080-0xa09f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xf8ffc000-0xf8ffc3ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0a00 (mask 0017)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 00ff)
pci 0000:00:1f.2: reg 10 io port: [0xa000-0xa007]
pci 0000:00:1f.2: reg 14 io port: [0x9c00-0x9c03]
pci 0000:00:1f.2: reg 18 io port: [0x9880-0x9887]
pci 0000:00:1f.2: reg 1c io port: [0x9800-0x9803]
pci 0000:00:1f.2: reg 20 io port: [0x9480-0x948f]
pci 0000:00:1f.2: reg 24 io port: [0x9400-0x940f]
pci 0000:00:1f.3: reg 10 64bit mmio: [0xf8ff7c00-0xf8ff7cff]
pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
pci 0000:00:1f.5: reg 10 io port: [0x9000-0x9007]
pci 0000:00:1f.5: reg 14 io port: [0x8c00-0x8c03]
pci 0000:00:1f.5: reg 18 io port: [0x8880-0x8887]
pci 0000:00:1f.5: reg 1c io port: [0x8800-0x8803]
pci 0000:00:1f.5: reg 20 io port: [0x8480-0x848f]
pci 0000:00:1f.5: reg 24 io port: [0x8400-0x840f]
pci 0000:02:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff]
pci 0000:02:00.0: reg 14 64bit mmio pref: [0xd0000000-0xdfffffff]
pci 0000:02:00.0: reg 1c 64bit mmio: [0xf9000000-0xf9ffffff]
pci 0000:02:00.0: reg 24 io port: [0xbc00-0xbc7f]
pci 0000:02:00.0: reg 30 32bit mmio pref: [0xfbbe0000-0xfbbfffff]
pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:03.0: bridge io port: [0xb000-0xbfff]
pci 0000:00:03.0: bridge 32bit mmio: [0xf9000000-0xfbbfffff]
pci 0000:00:03.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
pci 0000:05:00.0: reg 24 32bit mmio: [0xfbcfe000-0xfbcfffff]
pci 0000:05:00.0: PME# supported from D3hot
pci 0000:05:00.0: PME# disabled
pci 0000:05:00.1: reg 10 io port: [0xcc00-0xcc07]
pci 0000:05:00.1: reg 14 io port: [0xc880-0xc883]
pci 0000:05:00.1: reg 18 io port: [0xc800-0xc807]
pci 0000:05:00.1: reg 1c io port: [0xc480-0xc483]
pci 0000:05:00.1: reg 20 io port: [0xc400-0xc40f]
pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.1: bridge io port: [0xc000-0xcfff]
pci 0000:00:1c.1: bridge 32bit mmio: [0xfbc00000-0xfbcfffff]
pci 0000:06:00.0: reg 10 io port: [0xd800-0xd8ff]
pci 0000:06:00.0: reg 18 64bit mmio: [0xfbdff000-0xfbdfffff]
pci 0000:06:00.0: reg 20 64bit mmio pref: [0xf7ff0000-0xf7ffffff]
pci 0000:06:00.0: reg 30 32bit mmio pref: [0xfbdc0000-0xfbddffff]
pci 0000:06:00.0: supports D1 D2
pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:06:00.0: PME# disabled
pci 0000:00:1c.4: bridge io port: [0xd000-0xdfff]
pci 0000:00:1c.4: bridge 32bit mmio: [0xfbd00000-0xfbdfffff]
pci 0000:00:1c.4: bridge 64bit mmio pref: [0xf7f00000-0xf7ffffff]
pci 0000:07:00.0: reg 10 64bit mmio: [0xfbeff800-0xfbefffff]
pci 0000:07:00.0: reg 18 io port: [0xe800-0xe8ff]
pci 0000:07:00.0: supports D2
pci 0000:07:00.0: PME# supported from D2 D3hot D3cold
pci 0000:07:00.0: PME# disabled
pci 0000:00:1c.5: bridge io port: [0xe000-0xefff]
pci 0000:00:1c.5: bridge 32bit mmio: [0xfbe00000-0xfbefffff]
pci 0000:00:1e.0: transparent bridge
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 *7 10 11 12 14 15)
vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet clockevent registered
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 6
Switched to high resolution mode on CPU 5
Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 2
Switched to high resolution mode on CPU 3
Switched to high resolution mode on CPU 7
Switched to high resolution mode on CPU 4
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: iomem range 0xfbf00000-0xfbffffff has been reserved
system 00:01: iomem range 0xfc000000-0xfcffffff has been reserved
system 00:01: iomem range 0xfd000000-0xfdffffff has been reserved
system 00:01: iomem range 0xfe000000-0xfebfffff has been reserved
system 00:01: iomem range 0xfec8a000-0xfec8afff has been reserved
system 00:01: iomem range 0xfed10000-0xfed10fff has been reserved
system 00:08: ioport range 0xa00-0xadf has been reserved
system 00:08: ioport range 0xae0-0xaef has been reserved
system 00:09: ioport range 0x4d0-0x4d1 has been reserved
system 00:09: ioport range 0x800-0x87f has been reserved
system 00:09: ioport range 0x500-0x57f could not be reserved
system 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:09: iomem range 0xfed10000-0xfed103ff has been reserved
system 00:09: iomem range 0xfed10400-0xfed107ff has been reserved
system 00:09: iomem range 0xfed10800-0xfed10bff has been reserved
system 00:09: iomem range 0xfed10c00-0xfed10fff has been reserved
system 00:09: iomem range 0xfec8a000-0xfec8a3ff has been reserved
system 00:09: iomem range 0xfec8a400-0xfec8a7ff has been reserved
system 00:09: iomem range 0xfec8a800-0xfec8abff has been reserved
system 00:09: iomem range 0xfec8ac00-0xfec8afff has been reserved
system 00:09: iomem range 0xfed20000-0xfed3ffff has been reserved
system 00:09: iomem range 0xfed45000-0xfed89fff has been reserved
system 00:09: iomem range 0xfed20000-0xfed3ffff has been reserved
system 00:09: iomem range 0xfed40000-0xfed8ffff could not be reserved
system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
system 00:0c: iomem range 0x0-0x9ffff could not be reserved
system 00:0c: iomem range 0xc0000-0xcffff has been reserved
system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
system 00:0c: iomem range 0x100000-0xbfffffff could not be reserved
system 00:0c: iomem range 0xfed90000-0xffffffff could not be reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: disabled
pci 0000:00:01.0: MEM window: disabled
pci 0000:00:01.0: PREFETCH window: disabled
pci 0000:00:03.0: PCI bridge, secondary bus 0000:02
pci 0000:00:03.0: IO window: 0xb000-0xbfff
pci 0000:00:03.0: MEM window: 0xf9000000-0xfbbfffff
pci 0000:00:03.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
pci 0000:00:07.0: PCI bridge, secondary bus 0000:03
pci 0000:00:07.0: IO window: disabled
pci 0000:00:07.0: MEM window: disabled
pci 0000:00:07.0: PREFETCH window: disabled
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:04
pci 0000:00:1c.0: IO window: 0x1000-0x1fff
pci 0000:00:1c.0: MEM window: 0xc0000000-0xc01fffff
pci 0000:00:1c.0: PREFETCH window: 0x000000c0200000-0x000000c03fffff
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:05
pci 0000:00:1c.1: IO window: 0xc000-0xcfff
pci 0000:00:1c.1: MEM window: 0xfbc00000-0xfbcfffff
pci 0000:00:1c.1: PREFETCH window: 0x000000c0400000-0x000000c05fffff
pci 0000:00:1c.4: PCI bridge, secondary bus 0000:06
pci 0000:00:1c.4: IO window: 0xd000-0xdfff
pci 0000:00:1c.4: MEM window: 0xfbd00000-0xfbdfffff
pci 0000:00:1c.4: PREFETCH window: 0x000000f7f00000-0x000000f7ffffff
pci 0000:00:1c.5: PCI bridge, secondary bus 0000:07
pci 0000:00:1c.5: IO window: 0xe000-0xefff
pci 0000:00:1c.5: MEM window: 0xfbe00000-0xfbefffff
pci 0000:00:1c.5: PREFETCH window: 0x000000c0600000-0x000000c07fffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:08
pci 0000:00:1e.0: IO window: disabled
pci 0000:00:1e.0: MEM window: disabled
pci 0000:00:1e.0: PREFETCH window: disabled
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:07.0: setting latency timer to 64
pci 0000:00:1c.0: enabling device (0104 -> 0107)
alloc irq_desc for 17 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 16 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:02: resource 0 io: [0xb000-0xbfff]
pci_bus 0000:02: resource 1 mem: [0xf9000000-0xfbbfffff]
pci_bus 0000:02: resource 2 pref mem [0xd0000000-0xdfffffff]
pci_bus 0000:04: resource 0 io: [0x1000-0x1fff]
pci_bus 0000:04: resource 1 mem: [0xc0000000-0xc01fffff]
pci_bus 0000:04: resource 2 pref mem [0xc0200000-0xc03fffff]
pci_bus 0000:05: resource 0 io: [0xc000-0xcfff]
pci_bus 0000:05: resource 1 mem: [0xfbc00000-0xfbcfffff]
pci_bus 0000:05: resource 2 pref mem [0xc0400000-0xc05fffff]
pci_bus 0000:06: resource 0 io: [0xd000-0xdfff]
pci_bus 0000:06: resource 1 mem: [0xfbd00000-0xfbdfffff]
pci_bus 0000:06: resource 2 pref mem [0xf7f00000-0xf7ffffff]
pci_bus 0000:07: resource 0 io: [0xe000-0xefff]
pci_bus 0000:07: resource 1 mem: [0xfbe00000-0xfbefffff]
pci_bus 0000:07: resource 2 pref mem [0xc0600000-0xc07fffff]
pci_bus 0000:08: resource 3 io: [0x00-0xffff]
pci_bus 0000:08: resource 4 mem: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 3369k freed
microcode: CPU0 sig=0x106a4, pf=0x2, revision=0xf
microcode: CPU1 sig=0x106a4, pf=0x2, revision=0xf
microcode: CPU2 sig=0x106a4, pf=0x2, revision=0xf
microcode: CPU3 sig=0x106a4, pf=0x2, revision=0xf
microcode: CPU4 sig=0x106a4, pf=0x2, revision=0xf
microcode: CPU5 sig=0x106a4, pf=0x2, revision=0xf
microcode: CPU6 sig=0x106a4, pf=0x2, revision=0xf
microcode: CPU7 sig=0x106a4, pf=0x2, revision=0xf
Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
audit: initializing netlink socket (disabled)
type=2000 audit(1253704065.650:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.13)
Btrfs loaded
msgmni has been set to 11948
SELinux: Registering netfilter hooks
alg: No test for cipher_null (cipher_null-generic)
alg: No test for ecb(cipher_null) (ecb-cipher_null)
alg: No test for digest_null (digest_null-generic)
alg: No test for compress_null (compress_null-generic)
alg: No test for fcrypt (fcrypt-generic)
alg: No test for stdrng (krng)
alg: No test for ghash (ghash-generic)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered (default)
io scheduler anticipatory registered
io scheduler cfq registered
pci 0000:02:00.0: Boot video device
alloc irq_desc for 24 on node -1
alloc kstat_irqs on node -1
pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
pcieport-driver 0000:00:01.0: setting latency timer to 64
alloc irq_desc for 25 on node -1
alloc kstat_irqs on node -1
pcieport-driver 0000:00:03.0: irq 25 for MSI/MSI-X
pcieport-driver 0000:00:03.0: setting latency timer to 64
alloc irq_desc for 26 on node -1
alloc kstat_irqs on node -1
pcieport-driver 0000:00:07.0: irq 26 for MSI/MSI-X
pcieport-driver 0000:00:07.0: setting latency timer to 64
alloc irq_desc for 27 on node -1
alloc kstat_irqs on node -1
pcieport-driver 0000:00:1c.0: irq 27 for MSI/MSI-X
pcieport-driver 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 28 on node -1
alloc kstat_irqs on node -1
pcieport-driver 0000:00:1c.1: irq 28 for MSI/MSI-X
pcieport-driver 0000:00:1c.1: setting latency timer to 64
alloc irq_desc for 29 on node -1
alloc kstat_irqs on node -1
pcieport-driver 0000:00:1c.4: irq 29 for MSI/MSI-X
pcieport-driver 0000:00:1c.4: setting latency timer to 64
alloc irq_desc for 30 on node -1
alloc kstat_irqs on node -1
pcieport-driver 0000:00:1c.5: irq 30 for MSI/MSI-X
pcieport-driver 0000:00:1c.5: setting latency timer to 64
aer 0000:00:01.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:00:03.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:00:07.0:pcie02: AER service couldn't init device: no _OSC support
pci-stub: invalid id string ""
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90011800000, using 10240k, total 262144k
vesafb: mode is 1280x1024x32, linelength=5120, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 160x64
fb0: VESA VGA frame buffer device
vga16fb: initializing
vga16fb: mapped to 0xffff8800000a0000
fb1: VGA16 VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
ACPI: SSDT 00000000bf78e0c0 00403 (v01 DpgPmm P001Ist 00000011 INTL 20051117)
processor LNXCPU:00: registered as cooling_device0
ACPI: SSDT 00000000bf78e4d0 00403 (v01 DpgPmm P002Ist 00000012 INTL 20051117)
processor LNXCPU:01: registered as cooling_device1
ACPI: SSDT 00000000bf78e8e0 00403 (v01 DpgPmm P003Ist 00000012 INTL 20051117)
processor LNXCPU:02: registered as cooling_device2
ACPI: SSDT 00000000bf78ecf0 00403 (v01 DpgPmm P004Ist 00000012 INTL 20051117)
processor LNXCPU:03: registered as cooling_device3
ACPI: SSDT 00000000bf78f100 00403 (v01 DpgPmm P005Ist 00000012 INTL 20051117)
processor LNXCPU:04: registered as cooling_device4
ACPI: SSDT 00000000bf78f510 00403 (v01 DpgPmm P006Ist 00000012 INTL 20051117)
processor LNXCPU:05: registered as cooling_device5
ACPI: SSDT 00000000bf78f920 00403 (v01 DpgPmm P007Ist 00000012 INTL 20051117)
processor LNXCPU:06: registered as cooling_device6
ACPI: SSDT 00000000bf78fd30 00403 (v01 DpgPmm P008Ist 00000012 INTL 20051117)
processor LNXCPU:07: registered as cooling_device7
XENFS: not registering filesystem on non-xen platform
HDLC line discipline maxframe=4096
N_HDLC line discipline registered.
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
ipmi message handler version 39.2
ipmi device interface
IPMI System Interface driver.
ipmi_si: Unable to find any System Interface(s)
IPMI Watchdog: driver initialized
Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot.
brd: module loaded
loop: module loaded
ahci 0000:05:00.0: version 3.0
ahci 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
ahci 0000:05:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slum part
ahci 0000:05:00.0: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
ata1: SATA max UDMA/133 abar m8192@0xfbcfe000 port 0xfbcfe100 irq 17
ata2: SATA max UDMA/133 abar m8192@0xfbcfe000 port 0xfbcfe180 irq 17
ata_piix 0000:00:1f.2: version 2.13
alloc irq_desc for 19 on node -1
alloc kstat_irqs on node -1
ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 19
ata4: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 19
ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
ata_piix 0000:00:1f.5: setting latency timer to 64
scsi4 : ata_piix
scsi5 : ata_piix
ata5: SATA max UDMA/133 cmd 0x9000 ctl 0x8c00 bmdma 0x8480 irq 19
ata6: SATA max UDMA/133 cmd 0x8880 ctl 0x8800 bmdma 0x8488 irq 19
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:06:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
r8169 0000:06:00.0: setting latency timer to 64
alloc irq_desc for 31 on node -1
alloc kstat_irqs on node -1
r8169 0000:06:00.0: irq 31 for MSI/MSI-X
eth0: RTL8168c/8111c at 0xffffc90000c5a000, 00:24:21:32:03:4b, XID 1c4000c0 IRQ 31
usbcore: registered new interface driver hwa-rc
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
alloc irq_desc for 18 on node -1
alloc kstat_irqs on node -1
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf8ffe000
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.31-marco ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
alloc irq_desc for 23 on node -1
alloc kstat_irqs on node -1
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8ffc000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.31-marco ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ac00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.31-marco uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
alloc irq_desc for 21 on node -1
alloc kstat_irqs on node -1
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000a880
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.31-marco uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000a800
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.31-marco uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000a480
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.31-marco uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a400
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.31-marco uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a080
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 2.6.31-marco uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
usbcore: registered new interface driver wusb-cbaf
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
drivers/input/serio/i8042.c: 20 -> i8042 (command) [0]
drivers/input/serio/i8042.c: 65 <- i8042 (return) [0]
drivers/input/serio/i8042.c: 60 -> i8042 (command) [0]
drivers/input/serio/i8042.c: 74 -> i8042 (parameter) [0]
drivers/input/serio/i8042.c: Interrupt 1, without any data [0]
drivers/input/serio/i8042.c: 60 -> i8042 (command) [0]
drivers/input/serio/i8042.c: 65 -> i8042 (parameter) [0]
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
drivers/input/serio/i8042.c: f2 -> i8042 (kbd-data) [0]
I2O subsystem v1.325
i2o: max drivers = 8
I2O Configuration OSM v1.323
I2O Bus Adapter OSM v1.317
I2O Block Device OSM v1.325
I2O SCSI Peripheral OSM v1.316
I2O ProcFS OSM v1.316
i2c /dev entries driver
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 0, 1) [3]
drivers/input/serio/i8042.c: ab <- i8042 (interrupt, 0, 1) [4]
drivers/input/serio/i8042.c: 41 <- i8042 (interrupt, 0, 1) [5]
drivers/input/serio/i8042.c: ed -> i8042 (kbd-data) [5]
drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 0, 1) [8]
drivers/input/serio/i8042.c: 00 -> i8042 (kbd-data) [8]
drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 0, 1) [10]
drivers/input/serio/i8042.c: f3 -> i8042 (kbd-data) [10]
drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 0, 1) [13]
drivers/input/serio/i8042.c: 00 -> i8042 (kbd-data) [13]
drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 0, 1) [16]
drivers/input/serio/i8042.c: f4 -> i8042 (kbd-data) [16]
drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 0, 1) [18]
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
coretemp coretemp.0: Using relative temperature scale!
coretemp coretemp.1: Using relative temperature scale!
coretemp coretemp.2: Using relative temperature scale!
coretemp coretemp.3: Using relative temperature scale!
coretemp coretemp.4: Using relative temperature scale!
coretemp coretemp.5: Using relative temperature scale!
coretemp coretemp.6: Using relative temperature scale!
coretemp coretemp.7: Using relative temperature scale!
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
Advanced Linux Sound Architecture Driver Version 1.0.21.
input: PC Speaker as /devices/platform/pcspkr/input/input3
alloc irq_desc for 22 on node -1
alloc kstat_irqs on node -1
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: setting latency timer to 64
hda_codec: ALC889: BIOS auto-probing.
ALSA sound/pci/hda/hda_codec.c:3881: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0)
ALSA sound/pci/hda/hda_codec.c:3885: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3889: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3890: mono: mono_out=0x0
ALSA sound/pci/hda/hda_codec.c:3893: dig-out=0x1e/0x0
ALSA sound/pci/hda/hda_codec.c:3901: inputs: mic=0x18, fmic=0x19, line=0x1a, fline=0x0, cd=0x0, aux=0x0
ALSA sound/pci/hda/patch_realtek.c:1282: realtek: No valid SSID, checking pincfg 0x4007f603 for NID 0x1d
ALSA sound/pci/hda/patch_realtek.c:1298: realtek: Enabling init ASM_ID=0xf603 CODEC_ID=10ec0889
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input4
ALSA device list:
#0: Dummy 1
#1: Internal PC-Speaker at port 0x61
#2: HDA Intel at 0xf8ff8000 irq 22
oprofile: using NMI interrupt.
IPv4 over IPv4 tunneling driver
arp_tables: (C) 2002 David S. Miller
TCP bic registered
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
NET: Registered protocol family 15
Bridge firewalling registered
Ebtables v2.0 registered
PM: Resume from disk failed.
registered taskstats version 1
Magic number: 9:975:125
acpi device:00: hash matches
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
ata2: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATAPI: TSSTcorp CDDVDW SH-S223F, SB03, max UDMA/100, ATAPI AN
ata1.00: configured for UDMA/100
scsi 0:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223F SB03 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sr 0:0:0:0: Attached scsi generic sg0 type 5
usb 5-1: new low speed USB device using uhci_hcd and address 2
usb 5-1: New USB device found, idVendor=046d, idProduct=c01a
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1: Product: USB-PS/2 Optical Mouse
usb 5-1: Manufacturer: Logitech
usb 5-1: configuration #1 chosen from 1 choice
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input5
generic-usb 0003:046D:C01A.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.2-1/input0
ata3.00: SATA link down (SStatus 0 SControl 300)
ata3.01: SATA link down (SStatus 0 SControl 300)
ata4.00: SATA link down (SStatus 0 SControl 300)
ata4.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.01: ATA-7: INTEL SSDSA2MH080G1GC, 045C8610, max UDMA/133
ata4.01: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/31)
ata4.01: configured for UDMA/133
scsi 3:0:1:0: Direct-Access ATA INTEL SSDSA2MH08 045C PQ: 0 ANSI: 5
sd 3:0:1:0: Attached scsi generic sg1 type 0
sd 3:0:1:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
sd 3:0:1:0: [sda] Write Protect is off
sd 3:0:1:0: [sda] Mode Sense: 00 3a 00 00
sd 3:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4
sd 3:0:1:0: [sda] Attached SCSI disk
Freeing unused kernel memory: 1332k freed
Write protecting the kernel read-only data: 7576k
EXT4-fs (sda3): barriers enabled
kjournald2 starting: pid 199, dev sda3:8, commit interval 5 seconds
EXT4-fs (sda3): delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs (sda3): mounted filesystem with ordered data mode
SELinux: 8192 avtab hash slots, 137865 rules.
SELinux: 8192 avtab hash slots, 137865 rules.
SELinux: 8 users, 12 roles, 2861 types, 129 bools, 1 sens, 1024 cats
SELinux: 75 classes, 137865 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev sda3, type ext4), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
type=1403 audit(1253704068.739:2): policy loaded auid=4294967295 ses=4294967295
udev: starting version 145
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nvidia 0000:02:00.0: setting latency timer to 64
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 190.25 Thu Aug 20 16:36:08 PDT 2009
EXT4-fs (sda3): internal journal on sda3:8
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with writeback data mode.
SELinux: initialized (dev sda1, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
device fsid cd4d4a148f85c0c7-2771945e31146ca8 devid 1 transid 7698 /dev/sda2
Btrfs detected SSD devices, enabling SSD mode
SELinux: initialized (dev sda2, type btrfs), uses xattr
Adding 3167804k swap on /dev/sda4. Priority:-1 extents:1 across:3167804k SS
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
microcode: CPU0 updated to revision 0x10, date = 2009-02-20
microcode: CPU1 updated to revision 0x10, date = 2009-02-20
microcode: CPU2 updated to revision 0x10, date = 2009-02-20
microcode: CPU3 updated to revision 0x10, date = 2009-02-20
microcode: CPU4 updated to revision 0x10, date = 2009-02-20
microcode: CPU5 updated to revision 0x10, date = 2009-02-20
microcode: CPU6 updated to revision 0x10, date = 2009-02-20
microcode: CPU7 updated to revision 0x10, date = 2009-02-20
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
type=1400 audit(1253704070.589:6): avc: denied { module_request } for pid=841 comm="rpcbind" scontext=system_u:system_r:rpcbind_t:s0 tcontext=system_u:system_r:kernel_t:s0 tclass=system
NET: Registered protocol family 10
r8169: eth0: link up
r8169: eth0: link up
virbr0: starting userspace STP failed, starting kernel STP
drivers/input/serio/i8042.c: 13 <- i8042 (interrupt, 0, 1) [7731]
drivers/input/serio/i8042.c: 93 <- i8042 (interrupt, 0, 1) [7840]
drivers/input/serio/i8042.c: 18 <- i8042 (interrupt, 0, 1) [7889]
drivers/input/serio/i8042.c: 98 <- i8042 (interrupt, 0, 1) [7961]
drivers/input/serio/i8042.c: 18 <- i8042 (interrupt, 0, 1) [8043]
drivers/input/serio/i8042.c: 98 <- i8042 (interrupt, 0, 1) [8116]
drivers/input/serio/i8042.c: 14 <- i8042 (interrupt, 0, 1) [8145]
drivers/input/serio/i8042.c: 1c <- i8042 (interrupt, 0, 1) [8230]
drivers/input/serio/i8042.c: 94 <- i8042 (interrupt, 0, 1) [8244]
drivers/input/serio/i8042.c: 9c <- i8042 (interrupt, 0, 1) [8351]
drivers/input/serio/i8042.c: 19 <- i8042 (interrupt, 0, 1) [9036]
drivers/input/serio/i8042.c: 99 <- i8042 (interrupt, 0, 1) [9111]
drivers/input/serio/i8042.c: 12 <- i8042 (interrupt, 0, 1) [9142]
drivers/input/serio/i8042.c: 19 <- i8042 (interrupt, 0, 1) [9205]
drivers/input/serio/i8042.c: 92 <- i8042 (interrupt, 0, 1) [9233]
drivers/input/serio/i8042.c: 99 <- i8042 (interrupt, 0, 1) [9285]
drivers/input/serio/i8042.c: 1f <- i8042 (interrupt, 0, 1) [9407]
drivers/input/serio/i8042.c: 9f <- i8042 (interrupt, 0, 1) [9496]
drivers/input/serio/i8042.c: 17 <- i8042 (interrupt, 0, 1) [9515]
drivers/input/serio/i8042.c: 97 <- i8042 (interrupt, 0, 1) [9592]
drivers/input/serio/i8042.c: 1f <- i8042 (interrupt, 0, 1) [9648]
drivers/input/serio/i8042.c: 9f <- i8042 (interrupt, 0, 1) [9735]
drivers/input/serio/i8042.c: 1c <- i8042 (interrupt, 0, 1) [9955]
drivers/input/serio/i8042.c: 9c <- i8042 (interrupt, 0, 1) [10047]
drivers/input/serio/i8042.c: 1c <- i8042 (interrupt, 0, 1) [10333]
drivers/input/serio/i8042.c: 9c <- i8042 (interrupt, 0, 1) [10422]
drivers/input/serio/i8042.c: 1c <- i8042 (interrupt, 0, 1) [10522]
drivers/input/serio/i8042.c: 9c <- i8042 (interrupt, 0, 1) [10581]
drivers/input/serio/i8042.c: 1c <- i8042 (interrupt, 0, 1) [10670]
drivers/input/serio/i8042.c: 9c <- i8042 (interrupt, 0, 1) [10760]
drivers/input/serio/i8042.c: 17 <- i8042 (interrupt, 0, 1) [12076]
drivers/input/serio/i8042.c: 97 <- i8042 (interrupt, 0, 1) [12163]
drivers/input/serio/i8042.c: 31 <- i8042 (interrupt, 0, 1) [12189]
drivers/input/serio/i8042.c: 17 <- i8042 (interrupt, 0, 1) [12306]
drivers/input/serio/i8042.c: b1 <- i8042 (interrupt, 0, 1) [12322]
drivers/input/serio/i8042.c: 97 <- i8042 (interrupt, 0, 1) [12419]
drivers/input/serio/i8042.c: 14 <- i8042 (interrupt, 0, 1) [12426]
drivers/input/serio/i8042.c: 94 <- i8042 (interrupt, 0, 1) [12500]
drivers/input/serio/i8042.c: 39 <- i8042 (interrupt, 0, 1) [12579]
drivers/input/serio/i8042.c: b9 <- i8042 (interrupt, 0, 1) [12695]
drivers/input/serio/i8042.c: 06 <- i8042 (interrupt, 0, 1) [12747]
drivers/input/serio/i8042.c: 86 <- i8042 (interrupt, 0, 1) [12843]
drivers/input/serio/i8042.c: 1c <- i8042 (interrupt, 0, 1) [13605]
drivers/input/serio/i8042.c: 9c <- i8042 (interrupt, 0, 1) [13736]
eth0: no IPv6 routers present
CPU0 attaching NULL sched-domain.
CPU1 attaching NULL sched-domain.
CPU2 attaching NULL sched-domain.
CPU3 attaching NULL sched-domain.
CPU4 attaching NULL sched-domain.
CPU5 attaching NULL sched-domain.
CPU6 attaching NULL sched-domain.
CPU7 attaching NULL sched-domain.
CPU0 attaching sched-domain:
domain 0: span 0,4 level SIBLING
groups: 0 (cpu_power = 589) 4 (cpu_power = 589)
domain 1: span 0-7 level MC
groups: 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178)
CPU1 attaching sched-domain:
domain 0: span 1,5 level SIBLING
groups: 1 (cpu_power = 589) 5 (cpu_power = 589)
domain 1: span 0-7 level MC
groups: 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178)
CPU2 attaching sched-domain:
domain 0: span 2,6 level SIBLING
groups: 2 (cpu_power = 589) 6 (cpu_power = 589)
domain 1: span 0-7 level MC
groups: 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178)
CPU3 attaching sched-domain:
domain 0: span 3,7 level SIBLING
groups: 3 (cpu_power = 589) 7 (cpu_power = 589)
domain 1: span 0-7 level MC
groups: 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178)
CPU4 attaching sched-domain:
domain 0: span 0,4 level SIBLING
groups: 4 (cpu_power = 589) 0 (cpu_power = 589)
domain 1: span 0-7 level MC
groups: 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178)
CPU5 attaching sched-domain:
domain 0: span 1,5 level SIBLING
groups: 5 (cpu_power = 589) 1 (cpu_power = 589)
domain 1: span 0-7 level MC
groups: 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178)
CPU6 attaching sched-domain:
domain 0: span 2,6 level SIBLING
groups: 6 (cpu_power = 589) 2 (cpu_power = 589)
domain 1: span 0-7 level MC
groups: 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178)
CPU7 attaching sched-domain:
domain 0: span 3,7 level SIBLING
groups: 7 (cpu_power = 589) 3 (cpu_power = 589)
domain 1: span 0-7 level MC
groups: 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178)
drivers/input/serio/i8042.c: 1c <- i8042 (interrupt, 0, 1) [17568]
drivers/input/serio/i8042.c: 9c <- i8042 (interrupt, 0, 1) [17669]
drivers/input/serio/i8042.c: 19 <- i8042 (interrupt, 0, 1) [18393]
drivers/input/serio/i8042.c: 99 <- i8042 (interrupt, 0, 1) [18474]
drivers/input/serio/i8042.c: 12 <- i8042 (interrupt, 0, 1) [18511]
drivers/input/serio/i8042.c: 19 <- i8042 (interrupt, 0, 1) [18571]
drivers/input/serio/i8042.c: 92 <- i8042 (interrupt, 0, 1) [18595]
drivers/input/serio/i8042.c: 99 <- i8042 (interrupt, 0, 1) [18652]
drivers/input/serio/i8042.c: 1f <- i8042 (interrupt, 0, 1) [18740]
drivers/input/serio/i8042.c: 9f <- i8042 (interrupt, 0, 1) [18819]
drivers/input/serio/i8042.c: 17 <- i8042 (interrupt, 0, 1) [18829]
drivers/input/serio/i8042.c: 97 <- i8042 (interrupt, 0, 1) [18888]
drivers/input/serio/i8042.c: 1f <- i8042 (interrupt, 0, 1) [18922]
drivers/input/serio/i8042.c: 9f <- i8042 (interrupt, 0, 1) [19007]
drivers/input/serio/i8042.c: 1c <- i8042 (interrupt, 0, 1) [19109]
drivers/input/serio/i8042.c: 9c <- i8042 (interrupt, 0, 1) [19196]
SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
glxinfo[1629]: segfault at 0 ip 0000000000402a90 sp 00007fffa480a190 error 4 in glxinfo[400000+5000]
glxinfo[1649]: segfault at 0 ip 0000000000402a90 sp 00007fff22ea9c10 error 4 in glxinfo[400000+5000]
glxinfo[1660]: segfault at 0 ip 0000000000402a90 sp 00007fff5b80f1f0 error 4 in glxinfo[400000+5000]
glxinfo[1778]: segfault at 0 ip 0000000000402a90 sp 00007fffd8bf5a60 error 4 in glxinfo[400000+5000]
glxinfo[1796]: segfault at 0 ip 0000000000402a90 sp 00007fff6e02e600 error 4 in glxinfo[400000+5000]
drivers/input/serio/i8042.c: 32 <- i8042 (interrupt, 0, 1) [29042]
drivers/input/serio/i8042.c: b2 <- i8042 (interrupt, 0, 1) [29143]
drivers/input/serio/i8042.c: 18 <- i8042 (interrupt, 0, 1) [29166]
drivers/input/serio/i8042.c: 98 <- i8042 (interrupt, 0, 1) [29268]
drivers/input/serio/i8042.c: 13 <- i8042 (interrupt, 0, 1) [29312]
drivers/input/serio/i8042.c: 12 <- i8042 (interrupt, 0, 1) [29364]
drivers/input/serio/i8042.c: 93 <- i8042 (interrupt, 0, 1) [29404]
drivers/input/serio/i8042.c: 92 <- i8042 (interrupt, 0, 1) [29469]
drivers/input/serio/i8042.c: 0e <- i8042 (interrupt, 0, 1) [29844]
drivers/input/serio/i8042.c: 8e <- i8042 (interrupt, 0, 1) [29916]
drivers/input/serio/i8042.c: 0e <- i8042 (interrupt, 0, 1) [30002]
drivers/input/serio/i8042.c: 8e <- i8042 (interrupt, 0, 1) [30068]
drivers/input/serio/i8042.c: 0e <- i8042 (interrupt, 0, 1) [30157]
drivers/input/serio/i8042.c: 8e <- i8042 (interrupt, 0, 1) [30208]
drivers/input/serio/i8042.c: 0e <- i8042 (interrupt, 0, 1) [30296]
drivers/input/serio/i8042.c: 8e <- i8042 (interrupt, 0, 1) [30373]
drivers/input/serio/i8042.c: 0e <- i8042 (interrupt, 0, 1) [30444]
drivers/input/serio/i8042.c: 8e <- i8042 (interrupt, 0, 1) [30524]
drivers/input/serio/i8042.c: 1f <- i8042 (interrupt, 0, 1) [30664]
drivers/input/serio/i8042.c: 9f <- i8042 (interrupt, 0, 1) [30787]
drivers/input/serio/i8042.c: 16 <- i8042 (interrupt, 0, 1) [30822]
drivers/input/serio/i8042.c: 96 <- i8042 (interrupt, 0, 1) [30962]
drivers/input/serio/i8042.c: 1c <- i8042 (interrupt, 0, 1) [31126]
drivers/input/serio/i8042.c: 9c <- i8042 (interrupt, 0, 1) [31269]
drivers/input/serio/i8042.c: 19 <- i8042 (interrupt, 0, 1) [31876]
drivers/input/serio/i8042.c: 99 <- i8042 (interrupt, 0, 1) [31951]
drivers/input/serio/i8042.c: 12 <- i8042 (interrupt, 0, 1) [31971]
drivers/input/serio/i8042.c: 19 <- i8042 (interrupt, 0, 1) [32037]
drivers/input/serio/i8042.c: 92 <- i8042 (interrupt, 0, 1) [32058]
drivers/input/serio/i8042.c: 99 <- i8042 (interrupt, 0, 1) [32114]
drivers/input/serio/i8042.c: 1f <- i8042 (interrupt, 0, 1) [32192]
drivers/input/serio/i8042.c: 17 <- i8042 (interrupt, 0, 1) [32240]
drivers/input/serio/i8042.c: 9f <- i8042 (interrupt, 0, 1) [32265]
drivers/input/serio/i8042.c: 97 <- i8042 (interrupt, 0, 1) [32317]
drivers/input/serio/i8042.c: 1f <- i8042 (interrupt, 0, 1) [32355]
drivers/input/serio/i8042.c: 9f <- i8042 (interrupt, 0, 1) [32436]
drivers/input/serio/i8042.c: 1c <- i8042 (interrupt, 0, 1) [32485]
drivers/input/serio/i8042.c: 9c <- i8042 (interrupt, 0, 1) [32597]
drivers/input/serio/i8042.c: 2e <- i8042 (interrupt, 0, 1) [33087]
drivers/input/serio/i8042.c: 20 <- i8042 (interrupt, 0, 1) [33162]
drivers/input/serio/i8042.c: ae <- i8042 (interrupt, 0, 1) [33211]
drivers/input/serio/i8042.c: 39 <- i8042 (interrupt, 0, 1) [33238]
drivers/input/serio/i8042.c: a0 <- i8042 (interrupt, 0, 1) [33269]
drivers/input/serio/i8042.c: b9 <- i8042 (interrupt, 0, 1) [33338]
drivers/input/serio/i8042.c: 35 <- i8042 (interrupt, 0, 1) [33476]
drivers/input/serio/i8042.c: b5 <- i8042 (interrupt, 0, 1) [33558]
drivers/input/serio/i8042.c: 1c <- i8042 (interrupt, 0, 1) [33681]
drivers/input/serio/i8042.c: 9c <- i8042 (interrupt, 0, 1) [33785]
drivers/input/serio/i8042.c: 32 <- i8042 (interrupt, 0, 1) [34379]
drivers/input/serio/i8042.c: b2 <- i8042 (interrupt, 0, 1) [34472]
drivers/input/serio/i8042.c: 18 <- i8042 (interrupt, 0, 1) [34496]
drivers/input/serio/i8042.c: 13 <- i8042 (interrupt, 0, 1) [34596]
drivers/input/serio/i8042.c: 98 <- i8042 (interrupt, 0, 1) [34606]
drivers/input/serio/i8042.c: 12 <- i8042 (interrupt, 0, 1) [34660]
drivers/input/serio/i8042.c: 93 <- i8042 (interrupt, 0, 1) [34696]
drivers/input/serio/i8042.c: 92 <- i8042 (interrupt, 0, 1) [34753]
drivers/input/serio/i8042.c: 39 <- i8042 (interrupt, 0, 1) [34766]
drivers/input/serio/i8042.c: b9 <- i8042 (interrupt, 0, 1) [34847]
drivers/input/serio/i8042.c: 20 <- i8042 (interrupt, 0, 1) [35378]
drivers/input/serio/i8042.c: a0 <- i8042 (interrupt, 0, 1) [35468]
drivers/input/serio/i8042.c: 32 <- i8042 (interrupt, 0, 1) [35574]
drivers/input/serio/i8042.c: b2 <- i8042 (interrupt, 0, 1) [35643]
drivers/input/serio/i8042.c: 0f <- i8042 (interrupt, 0, 1) [35752]
drivers/input/serio/i8042.c: 8f <- i8042 (interrupt, 0, 1) [35861]
drivers/input/serio/i8042.c: 0e <- i8042 (interrupt, 0, 1) [36149]
drivers/input/serio/i8042.c: 8e <- i8042 (interrupt, 0, 1) [36221]
drivers/input/serio/i8042.c: 0e <- i8042 (interrupt, 0, 1) [36349]
drivers/input/serio/i8042.c: 8e <- i8042 (interrupt, 0, 1) [36421]
drivers/input/serio/i8042.c: 0f <- i8042 (interrupt, 0, 1) [36460]
drivers/input/serio/i8042.c: 8f <- i8042 (interrupt, 0, 1) [36577]
drivers/input/serio/i8042.c: 20 <- i8042 (interrupt, 0, 1) [38790]
drivers/input/serio/i8042.c: a0 <- i8042 (interrupt, 0, 1) [38859]
drivers/input/serio/i8042.c: 0f <- i8042 (interrupt, 0, 1) [39014]
drivers/input/serio/i8042.c: 8f <- i8042 (interrupt, 0, 1) [39189]
drivers/input/serio/i8042.c: 0e <- i8042 (interrupt, 0, 1) [39722]
drivers/input/serio/i8042.c: 0e <- i8042 (interrupt, 0, 1) [39974]
drivers/input/serio/i8042.c: 0e <- i8042 (interrupt, 0, 1) [40007]
drivers/input/serio/i8042.c: 0e <- i8042 (interrupt, 0, 1) [40039]
drivers/input/serio/i8042.c: 0e <- i8042 (interrupt, 0, 1) [40070]
drivers/input/serio/i8042.c: 0e <- i8042 (interrupt, 0, 1) [40102]
drivers/input/serio/i8042.c: 0e <- i8042 (interrupt, 0, 1) [40133]
drivers/input/serio/i8042.c: 0e <- i8042 (interrupt, 0, 1) [40165]
drivers/input/serio/i8042.c: 0e <- i8042 (interrupt, 0, 1) [40197]
drivers/input/serio/i8042.c: 0e <- i8042 (interrupt, 0, 1) [40228]
drivers/input/serio/i8042.c: 0e <- i8042 (interrupt, 0, 1) [40260]
drivers/input/serio/i8042.c: 0e <- i8042 (interrupt, 0, 1) [40293]
drivers/input/serio/i8042.c: 0e <- i8042 (interrupt, 0, 1) [40325]
drivers/input/serio/i8042.c: 0e <- i8042 (interrupt, 0, 1) [40356]
drivers/input/serio/i8042.c: 0e <- i8042 (interrupt, 0, 1) [40388]
drivers/input/serio/i8042.c: 0e <- i8042 (interrupt, 0, 1) [40420]
drivers/input/serio/i8042.c: 0e <- i8042 (interrupt, 0, 1) [40451]
drivers/input/serio/i8042.c: 0e <- i8042 (interrupt, 0, 1) [40483]
drivers/input/serio/i8042.c: 0e <- i8042 (interrupt, 0, 1) [40514]
drivers/input/serio/i8042.c: 0e <- i8042 (interrupt, 0, 1) [40548]
drivers/input/serio/i8042.c: 0e <- i8042 (interrupt, 0, 1) [40579]
drivers/input/serio/i8042.c: 8e <- i8042 (interrupt, 0, 1) [40599]
drivers/input/serio/i8042.c: 2e <- i8042 (interrupt, 0, 1) [41599]
drivers/input/serio/i8042.c: 20 <- i8042 (interrupt, 0, 1) [41698]
drivers/input/serio/i8042.c: ae <- i8042 (interrupt, 0, 1) [41737]
drivers/input/serio/i8042.c: 39 <- i8042 (interrupt, 0, 1) [41755]
drivers/input/serio/i8042.c: a0 <- i8042 (interrupt, 0, 1) [41787]
drivers/input/serio/i8042.c: b9 <- i8042 (interrupt, 0, 1) [41845]
drivers/input/serio/i8042.c: 1c <- i8042 (interrupt, 0, 1) [43189]
drivers/input/serio/i8042.c: 9c <- i8042 (interrupt, 0, 1) [43300]
drivers/input/serio/i8042.c: 32 <- i8042 (interrupt, 0, 1) [44920]
drivers/input/serio/i8042.c: b2 <- i8042 (interrupt, 0, 1) [45035]
drivers/input/serio/i8042.c: 18 <- i8042 (interrupt, 0, 1) [45073]
drivers/input/serio/i8042.c: 13 <- i8042 (interrupt, 0, 1) [45132]
drivers/input/serio/i8042.c: 98 <- i8042 (interrupt, 0, 1) [45182]
drivers/input/serio/i8042.c: 12 <- i8042 (interrupt, 0, 1) [45198]
drivers/input/serio/i8042.c: 93 <- i8042 (interrupt, 0, 1) [45230]
drivers/input/serio/i8042.c: 92 <- i8042 (interrupt, 0, 1) [45272]
drivers/input/serio/i8042.c: 39 <- i8042 (interrupt, 0, 1) [45288]
drivers/input/serio/i8042.c: b9 <- i8042 (interrupt, 0, 1) [45394]
drivers/input/serio/i8042.c: 20 <- i8042 (interrupt, 0, 1) [45409]
drivers/input/serio/i8042.c: a0 <- i8042 (interrupt, 0, 1) [45485]
drivers/input/serio/i8042.c: 0f <- i8042 (interrupt, 0, 1) [45577]
drivers/input/serio/i8042.c: 8f <- i8042 (interrupt, 0, 1) [45723]
drivers/input/serio/i8042.c: 0e <- i8042 (interrupt, 0, 1) [46578]
drivers/input/serio/i8042.c: 8e <- i8042 (interrupt, 0, 1) [46661]
drivers/input/serio/i8042.c: 0e <- i8042 (interrupt, 0, 1) [46749]
drivers/input/serio/i8042.c: 8e <- i8042 (interrupt, 0, 1) [46819]
drivers/input/serio/i8042.c: 0e <- i8042 (interrupt, 0, 1) [46908]
drivers/input/serio/i8042.c: 8e <- i8042 (interrupt, 0, 1) [46982]
drivers/input/serio/i8042.c: 0e <- i8042 (interrupt, 0, 1) [47068]
drivers/input/serio/i8042.c: 8e <- i8042 (interrupt, 0, 1) [47135]
drivers/input/serio/i8042.c: 0e <- i8042 (interrupt, 0, 1) [47209]
drivers/input/serio/i8042.c: 8e <- i8042 (interrupt, 0, 1) [47271]
drivers/input/serio/i8042.c: 0e <- i8042 (interrupt, 0, 1) [47355]
drivers/input/serio/i8042.c: 8e <- i8042 (interrupt, 0, 1) [47420]
drivers/input/serio/i8042.c: 26 <- i8042 (interrupt, 0, 1) [47580]
drivers/input/serio/i8042.c: a6 <- i8042 (interrupt, 0, 1) [47679]
drivers/input/serio/i8042.c: 1f <- i8042 (interrupt, 0, 1) [47696]
drivers/input/serio/i8042.c: 1c <- i8042 (interrupt, 0, 1) [47775]
drivers/input/serio/i8042.c: 9f <- i8042 (interrupt, 0, 1) [47798]
drivers/input/serio/i8042.c: 9c <- i8042 (interrupt, 0, 1) [47894]
drivers/input/serio/i8042.c: 32 <- i8042 (interrupt, 0, 1) [50625]
drivers/input/serio/i8042.c: b2 <- i8042 (interrupt, 0, 1) [50710]
drivers/input/serio/i8042.c: 18 <- i8042 (interrupt, 0, 1) [50739]
drivers/input/serio/i8042.c: 98 <- i8042 (interrupt, 0, 1) [50822]
drivers/input/serio/i8042.c: 13 <- i8042 (interrupt, 0, 1) [50841]
drivers/input/serio/i8042.c: 12 <- i8042 (interrupt, 0, 1) [50888]
drivers/input/serio/i8042.c: 93 <- i8042 (interrupt, 0, 1) [50933]
drivers/input/serio/i8042.c: 39 <- i8042 (interrupt, 0, 1) [50951]
drivers/input/serio/i8042.c: 92 <- i8042 (interrupt, 0, 1) [50975]
drivers/input/serio/i8042.c: b9 <- i8042 (interrupt, 0, 1) [51044]
drivers/input/serio/i8042.c: 30 <- i8042 (interrupt, 0, 1) [51173]
drivers/input/serio/i8042.c: b0 <- i8042 (interrupt, 0, 1) [51253]
drivers/input/serio/i8042.c: 1e <- i8042 (interrupt, 0, 1) [51267]
drivers/input/serio/i8042.c: 20 <- i8042 (interrupt, 0, 1) [51317]
drivers/input/serio/i8042.c: 9e <- i8042 (interrupt, 0, 1) [51370]
drivers/input/serio/i8042.c: a0 <- i8042 (interrupt, 0, 1) [51442]
drivers/input/serio/i8042.c: 2a <- i8042 (interrupt, 0, 1) [51534]
drivers/input/serio/i8042.c: 0c <- i8042 (interrupt, 0, 1) [51682]
drivers/input/serio/i8042.c: 8c <- i8042 (interrupt, 0, 1) [51772]
drivers/input/serio/i8042.c: aa <- i8042 (interrupt, 0, 1) [51876]
drivers/input/serio/i8042.c: 17 <- i8042 (interrupt, 0, 1) [52536]
drivers/input/serio/i8042.c: 97 <- i8042 (interrupt, 0, 1) [52613]
drivers/input/serio/i8042.c: 09 <- i8042 (interrupt, 0, 1) [52764]
drivers/input/serio/i8042.c: 89 <- i8042 (interrupt, 0, 1) [52826]
drivers/input/serio/i8042.c: 0b <- i8042 (interrupt, 0, 1) [52932]
drivers/input/serio/i8042.c: 8b <- i8042 (interrupt, 0, 1) [53009]
drivers/input/serio/i8042.c: 0f <- i8042 (interrupt, 0, 1) [53144]
drivers/input/serio/i8042.c: 8f <- i8042 (interrupt, 0, 1) [53255]
drivers/input/serio/i8042.c: 1c <- i8042 (interrupt, 0, 1) [53704]
drivers/input/serio/i8042.c: 9c <- i8042 (interrupt, 0, 1) [53805]
drivers/input/serio/i8042.c: 39 <- i8042 (interrupt, 0, 1) [55381]
drivers/input/serio/i8042.c: b9 <- i8042 (interrupt, 0, 1) [55537]
drivers/input/serio/i8042.c: 39 <- i8042 (interrupt, 0, 1) [55953]
drivers/input/serio/i8042.c: b9 <- i8042 (interrupt, 0, 1) [56118]
drivers/input/serio/i8042.c: 39 <- i8042 (interrupt, 0, 1) [56499]
drivers/input/serio/i8042.c: b9 <- i8042 (interrupt, 0, 1) [56676]
drivers/input/serio/i8042.c: 39 <- i8042 (interrupt, 0, 1) [56976]
drivers/input/serio/i8042.c: b9 <- i8042 (interrupt, 0, 1) [57141]
drivers/input/serio/i8042.c: 39 <- i8042 (interrupt, 0, 1) [57547]
drivers/input/serio/i8042.c: b9 <- i8042 (interrupt, 0, 1) [57701]
drivers/input/serio/i8042.c: 39 <- i8042 (interrupt, 0, 1) [58151]
drivers/input/serio/i8042.c: b9 <- i8042 (interrupt, 0, 1) [58317]
drivers/input/serio/i8042.c: 39 <- i8042 (interrupt, 0, 1) [58813]
drivers/input/serio/i8042.c: b9 <- i8042 (interrupt, 0, 1) [58977]
drivers/input/serio/i8042.c: 39 <- i8042 (interrupt, 0, 1) [59978]
drivers/input/serio/i8042.c: b9 <- i8042 (interrupt, 0, 1) [60144]
drivers/input/serio/i8042.c: 39 <- i8042 (interrupt, 0, 1) [60971]
drivers/input/serio/i8042.c: b9 <- i8042 (interrupt, 0, 1) [61120]
drivers/input/serio/i8042.c: 39 <- i8042 (interrupt, 0, 1) [61434]
drivers/input/serio/i8042.c: b9 <- i8042 (interrupt, 0, 1) [61582]
drivers/input/serio/i8042.c: 39 <- i8042 (interrupt, 0, 1) [62093]
drivers/input/serio/i8042.c: b9 <- i8042 (interrupt, 0, 1) [62241]
drivers/input/serio/i8042.c: 39 <- i8042 (interrupt, 0, 1) [62675]
drivers/input/serio/i8042.c: b9 <- i8042 (interrupt, 0, 1) [62851]
drivers/input/serio/i8042.c: 39 <- i8042 (interrupt, 0, 1) [63080]
drivers/input/serio/i8042.c: b9 <- i8042 (interrupt, 0, 1) [63233]
drivers/input/serio/i8042.c: 39 <- i8042 (interrupt, 0, 1) [63792]
drivers/input/serio/i8042.c: b9 <- i8042 (interrupt, 0, 1) [63953]
drivers/input/serio/i8042.c: 39 <- i8042 (interrupt, 0, 1) [64527]
drivers/input/serio/i8042.c: b9 <- i8042 (interrupt, 0, 1) [64672]
drivers/input/serio/i8042.c: 39 <- i8042 (interrupt, 0, 1) [64819]
drivers/input/serio/i8042.c: b9 <- i8042 (interrupt, 0, 1) [64954]
drivers/input/serio/i8042.c: 39 <- i8042 (interrupt, 0, 1) [65046]
drivers/input/serio/i8042.c: b9 <- i8042 (interrupt, 0, 1) [65177]
drivers/input/serio/i8042.c: 39 <- i8042 (interrupt, 0, 1) [65432]
drivers/input/serio/i8042.c: b9 <- i8042 (interrupt, 0, 1) [65555]
drivers/input/serio/i8042.c: 39 <- i8042 (interrupt, 0, 1) [65662]
drivers/input/serio/i8042.c: b9 <- i8042 (interrupt, 0, 1) [65815]
drivers/input/serio/i8042.c: 39 <- i8042 (interrupt, 0, 1) [65910]
drivers/input/serio/i8042.c: b9 <- i8042 (interrupt, 0, 1) [66021]
drivers/input/serio/i8042.c: 39 <- i8042 (interrupt, 0, 1) [66101]
drivers/input/serio/i8042.c: b9 <- i8042 (interrupt, 0, 1) [66230]
drivers/input/serio/i8042.c: 39 <- i8042 (interrupt, 0, 1) [66430]
drivers/input/serio/i8042.c: b9 <- i8042 (interrupt, 0, 1) [66568]
drivers/input/serio/i8042.c: 39 <- i8042 (interrupt, 0, 1) [66760]
drivers/input/serio/i8042.c: b9 <- i8042 (interrupt, 0, 1) [66906]
drivers/input/serio/i8042.c: 39 <- i8042 (interrupt, 0, 1) [67032]
drivers/input/serio/i8042.c: b9 <- i8042 (interrupt, 0, 1) [67190]
drivers/input/serio/i8042.c: 39 <- i8042 (interrupt, 0, 1) [67299]
drivers/input/serio/i8042.c: b9 <- i8042 (interrupt, 0, 1) [67462]
drivers/input/serio/i8042.c: 39 <- i8042 (interrupt, 0, 1) [67568]
drivers/input/serio/i8042.c: b9 <- i8042 (interrupt, 0, 1) [67723]
drivers/input/serio/i8042.c: 39 <- i8042 (interrupt, 0, 1) [68018]
drivers/input/serio/i8042.c: 39 <- i8042 (interrupt, 0, 1) [68269]
drivers/input/serio/i8042.c: 39 <- i8042 (interrupt, 0, 1) [68301]
drivers/input/serio/i8042.c: 39 <- i8042 (interrupt, 0, 1) [68334]
drivers/input/serio/i8042.c: 39 <- i8042 (interrupt, 0, 1) [68366]
drivers/input/serio/i8042.c: 39 <- i8042 (interrupt, 0, 1) [68397]
drivers/input/serio/i8042.c: 39 <- i8042 (interrupt, 0, 1) [68429]
drivers/input/serio/i8042.c: 39 <- i8042 (interrupt, 0, 1) [68460]
drivers/input/serio/i8042.c: 39 <- i8042 (interrupt, 0, 1) [68492]
drivers/input/serio/i8042.c: 39 <- i8042 (interrupt, 0, 1) [68525]
drivers/input/serio/i8042.c: 39 <- i8042 (interrupt, 0, 1) [68557]
drivers/input/serio/i8042.c: 39 <- i8042 (interrupt, 0, 1) [68588]
drivers/input/serio/i8042.c: 39 <- i8042 (interrupt, 0, 1) [68620]
drivers/input/serio/i8042.c: b9 <- i8042 (interrupt, 0, 1) [68642]
drivers/input/serio/i8042.c: 10 <- i8042 (interrupt, 0, 1) [68926]
drivers/input/serio/i8042.c: 90 <- i8042 (interrupt, 0, 1) [69085]
drivers/input/serio/i8042.c: 20 <- i8042 (interrupt, 0, 1) [69952]
drivers/input/serio/i8042.c: a0 <- i8042 (interrupt, 0, 1) [70061]
drivers/input/serio/i8042.c: 32 <- i8042 (interrupt, 0, 1) [70158]
drivers/input/serio/i8042.c: b2 <- i8042 (interrupt, 0, 1) [70237]
drivers/input/serio/i8042.c: 12 <- i8042 (interrupt, 0, 1) [70247]
drivers/input/serio/i8042.c: 92 <- i8042 (interrupt, 0, 1) [70349]
drivers/input/serio/i8042.c: 1f <- i8042 (interrupt, 0, 1) [70431]
drivers/input/serio/i8042.c: 9f <- i8042 (interrupt, 0, 1) [70517]
drivers/input/serio/i8042.c: 22 <- i8042 (interrupt, 0, 1) [70591]
drivers/input/serio/i8042.c: a2 <- i8042 (interrupt, 0, 1) [70673]
drivers/input/serio/i8042.c: 39 <- i8042 (interrupt, 0, 1) [70737]
drivers/input/serio/i8042.c: b9 <- i8042 (interrupt, 0, 1) [70838]
drivers/input/serio/i8042.c: 2a <- i8042 (interrupt, 0, 1) [71075]
drivers/input/serio/i8042.c: 2a <- i8042 (interrupt, 0, 1) [71328]
drivers/input/serio/i8042.c: 2a <- i8042 (interrupt, 0, 1) [71360]
drivers/input/serio/i8042.c: 2a <- i8042 (interrupt, 0, 1) [71392]
drivers/input/serio/i8042.c: 2a <- i8042 (interrupt, 0, 1) [71423]
drivers/input/serio/i8042.c: 2a <- i8042 (interrupt, 0, 1) [71454]
drivers/input/serio/i8042.c: aa <- i8042 (interrupt, 0, 1) [71466]
drivers/input/serio/i8042.c: 2a <- i8042 (interrupt, 0, 1) [71971]
drivers/input/serio/i8042.c: 2a <- i8042 (interrupt, 0, 1) [72223]
drivers/input/serio/i8042.c: 2a <- i8042 (interrupt, 0, 1) [72254]
drivers/input/serio/i8042.c: 2a <- i8042 (interrupt, 0, 1) [72286]
drivers/input/serio/i8042.c: 2a <- i8042 (interrupt, 0, 1) [72317]
drivers/input/serio/i8042.c: 2a <- i8042 (interrupt, 0, 1) [72349]
drivers/input/serio/i8042.c: 2a <- i8042 (interrupt, 0, 1) [72381]
drivers/input/serio/i8042.c: 2a <- i8042 (interrupt, 0, 1) [72414]
drivers/input/serio/i8042.c: 34 <- i8042 (interrupt, 0, 1) [72430]
drivers/input/serio/i8042.c: b4 <- i8042 (interrupt, 0, 1) [72507]
drivers/input/serio/i8042.c: aa <- i8042 (interrupt, 0, 1) [72572]
drivers/input/serio/i8042.c: 39 <- i8042 (interrupt, 0, 1) [72878]
drivers/input/serio/i8042.c: b9 <- i8042 (interrupt, 0, 1) [73007]
drivers/input/serio/i8042.c: 22 <- i8042 (interrupt, 0, 1) [73190]
drivers/input/serio/i8042.c: a2 <- i8042 (interrupt, 0, 1) [73283]
drivers/input/serio/i8042.c: 18 <- i8042 (interrupt, 0, 1) [73346]
drivers/input/serio/i8042.c: 98 <- i8042 (interrupt, 0, 1) [73402]
drivers/input/serio/i8042.c: 18 <- i8042 (interrupt, 0, 1) [73493]
drivers/input/serio/i8042.c: 98 <- i8042 (interrupt, 0, 1) [73566]
drivers/input/serio/i8042.c: 20 <- i8042 (interrupt, 0, 1) [73825]
drivers/input/serio/i8042.c: a0 <- i8042 (interrupt, 0, 1) [73917]
drivers/input/serio/i8042.c: 34 <- i8042 (interrupt, 0, 1) [74094]
drivers/input/serio/i8042.c: b4 <- i8042 (interrupt, 0, 1) [74168]
drivers/input/serio/i8042.c: 17 <- i8042 (interrupt, 0, 1) [74427]
drivers/input/serio/i8042.c: 97 <- i8042 (interrupt, 0, 1) [74494]
drivers/input/serio/i8042.c: 0b <- i8042 (interrupt, 0, 1) [74797]
drivers/input/serio/i8042.c: 8b <- i8042 (interrupt, 0, 1) [74879]
drivers/input/serio/i8042.c: 09 <- i8042 (interrupt, 0, 1) [75022]
drivers/input/serio/i8042.c: 89 <- i8042 (interrupt, 0, 1) [75096]
drivers/input/serio/i8042.c: 05 <- i8042 (interrupt, 0, 1) [75430]
drivers/input/serio/i8042.c: 85 <- i8042 (interrupt, 0, 1) [75519]
drivers/input/serio/i8042.c: 03 <- i8042 (interrupt, 0, 1) [75649]
drivers/input/serio/i8042.c: 83 <- i8042 (interrupt, 0, 1) [75771]
drivers/input/serio/i8042.c: 1c <- i8042 (interrupt, 0, 1) [76195]
[-- Attachment #3: bad_i8042 --]
[-- Type: application/octet-stream, Size: 51837 bytes --]
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.31-marco (root@tornado) (gcc version 4.4.1 20090918 (Red Hat 4.4.1-15) (GCC) ) #39 SMP Tue Sep 22 19:00:40 EDT 2009
Command line: ro root=UUID=2013c140-3e2e-4b04-aaa0-86893fba78df vga=0x31b 3 selinux=1 i8042.debug
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bf780000 (usable)
BIOS-e820: 00000000bf780000 - 00000000bf78e000 (ACPI data)
BIOS-e820: 00000000bf78e000 - 00000000bf7d0000 (ACPI NVS)
BIOS-e820: 00000000bf7d0000 - 00000000bf7e0000 (reserved)
BIOS-e820: 00000000bf7ec000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 00000001c0000000 (usable)
DMI present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
last_pfn = 0x1c0000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-DFFFF uncachable
E0000-E3FFF write-protect
E4000-EFFFF write-through
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 1C0000000 mask FC0000000 uncachable
1 base 000000000 mask E00000000 write-back
2 base 0C0000000 mask FC0000000 uncachable
3 base 0BF800000 mask FFF800000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 7GB, range: 1GB, type UC
reg 1, base: 0GB, range: 8GB, type WB
reg 2, base: 3GB, range: 1GB, type UC
reg 3, base: 3064MB, range: 8MB, type UC
total RAM coverred: 6136M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 16M num_reg: 5 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3064MB, range: 8MB, type UC
reg 3, base: 4GB, range: 2GB, type WB
reg 4, base: 6GB, range: 1GB, type WB
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000bf800000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xbf780 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-00000000bf780000
0000000000 - 00bf600000 page 2M
00bf600000 - 00bf780000 page 4k
kernel direct mapping tables up to bf780000 @ 10000-15000
init_memory_mapping: 0000000100000000-00000001c0000000
0100000000 - 01c0000000 page 2M
kernel direct mapping tables up to 1c0000000 @ 13000-1b000
RAMDISK: 37ca5000 - 37fef6c4
ACPI: RSDP 00000000000fa040 00014 (v00 ACPIAM)
ACPI: RSDT 00000000bf780000 00038 (v01 7593MS A7593100 20090417 MSFT 00000097)
ACPI: FACP 00000000bf780200 00084 (v01 7593MS A7593100 20090417 MSFT 00000097)
ACPI: DSDT 00000000bf780460 06D02 (v01 A7593 A7593100 00000100 INTL 20051117)
ACPI: FACS 00000000bf78e000 00040
ACPI: APIC 00000000bf780390 0008C (v01 7593MS A7593100 20090417 MSFT 00000097)
ACPI: MCFG 00000000bf780420 0003C (v01 7593MS OEMMCFG 20090417 MSFT 00000097)
ACPI: OEMB 00000000bf78e040 0007A (v01 7593MS A7593100 20090417 MSFT 00000097)
ACPI: SSDT 00000000bf790140 01298 (v01 DpgPmm CpuPm 00000012 INTL 20051117)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-00000001c0000000
Bootmem setup node 0 0000000000000000-00000001c0000000
NODE_DATA [0000000000016000 - 000000000002afff]
bootmap [000000000002b000 - 0000000000062fff] pages 38
(8 early reservations) ==> bootmem [0000000000 - 01c0000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 0001af5ea0] TEXT DATA BSS ==> [0001000000 - 0001af5ea0]
#3 [0037ca5000 - 0037fef6c4] RAMDISK ==> [0037ca5000 - 0037fef6c4]
#4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
#5 [0001af6000 - 0001af6127] BRK ==> [0001af6000 - 0001af6127]
#6 [0000010000 - 0000013000] PGTABLE ==> [0000010000 - 0000013000]
#7 [0000013000 - 0000016000] PGTABLE ==> [0000013000 - 0000016000]
found SMP MP-table at [ffff8800000ff780] ff780
[ffffea0000000000-ffffea00061fffff] PMD -> [ffff880028600000-ffff88002d9fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x001c0000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x000bf780
0: 0x00100000 -> 0x001c0000
On node 0 totalpages: 1570575
DMA zone: 56 pages used for memmap
DMA zone: 105 pages reserved
DMA zone: 3822 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 765880 pages, LIFO batch:31
Normal zone: 10752 pages used for memmap
Normal zone: 775680 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000bf780000 - 00000000bf78e000
PM: Registered nosave memory: 00000000bf78e000 - 00000000bf7d0000
PM: Registered nosave memory: 00000000bf7d0000 - 00000000bf7e0000
PM: Registered nosave memory: 00000000bf7e0000 - 00000000bf7ec000
PM: Registered nosave memory: 00000000bf7ec000 - 00000000c0000000
PM: Registered nosave memory: 00000000c0000000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ffc00000
PM: Registered nosave memory: 00000000ffc00000 - 0000000100000000
Allocating PCI resources starting at c0000000 (gap: c0000000:3ee00000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 30 pages/cpu @ffff880028200000 s91160 r8192 d23528 u262144
pcpu-alloc: s91160 r8192 d23528 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1545382
Policy zone: Normal
Kernel command line: ro root=UUID=2013c140-3e2e-4b04-aaa0-86893fba78df vga=0x31b 3 selinux=1 i8042.debug
PID hash table entries: 4096 (order: 3, 32768 bytes)
Initializing CPU#0
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
software IO TLB at phys 0x20000000 - 0x24000000
Memory: 6114384k/7340032k available (5241k kernel code, 1057732k absent, 167916k reserved, 3378k data, 1332k init)
SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:4352 nr_irqs:472
Console: colour dummy device 80x25
console [tty0] enabled
allocated 62914560 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Fast TSC calibration using PIT
Detected 2673.536 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5347.07 BogoMIPS (lpj=2673536)
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 0/0x0 -> Node 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
CPU 0 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6 SHD:8
using mwait in idle threads.
Performance Events: Nehalem/Corei7 events, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
ACPI: Core revision 20090521
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 04
Booting processor 1 APIC 0x2 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 5344.67 BogoMIPS (lpj=2672336)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 1/0x2 -> Node 0
mce: CPU supports 9 MCE banks
CPU1: Thermal monitoring enabled (TM1)
CPU 1 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
CPU1: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 04
Skipping synchronization checks as TSC is reliable.
Booting processor 2 APIC 0x4 ip 0x6000
Initializing CPU#2
Calibrating delay using timer specific routine.. 5344.67 BogoMIPS (lpj=2672337)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 2/0x4 -> Node 0
mce: CPU supports 9 MCE banks
CPU2: Thermal monitoring enabled (TM1)
CPU 2 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
CPU2: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 04
Skipping synchronization checks as TSC is reliable.
Booting processor 3 APIC 0x6 ip 0x6000
Initializing CPU#3
Calibrating delay using timer specific routine.. 5344.67 BogoMIPS (lpj=2672335)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 3
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 3/0x6 -> Node 0
mce: CPU supports 9 MCE banks
CPU3: Thermal monitoring enabled (TM1)
CPU 3 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
CPU3: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 04
Skipping synchronization checks as TSC is reliable.
Booting processor 4 APIC 0x1 ip 0x6000
Initializing CPU#4
Calibrating delay using timer specific routine.. 5344.67 BogoMIPS (lpj=2672336)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 4/0x1 -> Node 0
mce: CPU supports 9 MCE banks
CPU4: Thermal monitoring enabled (TM1)
CPU 4 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
CPU4: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 04
Skipping synchronization checks as TSC is reliable.
Booting processor 5 APIC 0x3 ip 0x6000
Initializing CPU#5
Calibrating delay using timer specific routine.. 5344.67 BogoMIPS (lpj=2672337)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 5/0x3 -> Node 0
mce: CPU supports 9 MCE banks
CPU5: Thermal monitoring enabled (TM1)
CPU 5 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
CPU5: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 04
Skipping synchronization checks as TSC is reliable.
Booting processor 6 APIC 0x5 ip 0x6000
Initializing CPU#6
Calibrating delay using timer specific routine.. 5344.67 BogoMIPS (lpj=2672338)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 6/0x5 -> Node 0
mce: CPU supports 9 MCE banks
CPU6: Thermal monitoring enabled (TM1)
CPU 6 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
CPU6: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 04
Skipping synchronization checks as TSC is reliable.
Booting processor 7 APIC 0x7 ip 0x6000
Initializing CPU#7
Calibrating delay using timer specific routine.. 5384.54 BogoMIPS (lpj=2692274)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 3
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU 7/0x7 -> Node 0
mce: CPU supports 9 MCE banks
CPU7: Thermal monitoring enabled (TM1)
CPU 7 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
CPU7: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 04
Skipping synchronization checks as TSC is reliable.
Brought up 8 CPUs
Total of 8 processors activated (42799.65 BogoMIPS).
x86 PAT enabled: cpu 4, old 0x7040600070406, new 0x7010600070106
x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106
x86 PAT enabled: cpu 7, old 0x7040600070406, new 0x7010600070106
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
x86 PAT enabled: cpu 5, old 0x7040600070406, new 0x7010600070106
x86 PAT enabled: cpu 6, old 0x7040600070406, new 0x7010600070106
x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
CPU0 attaching sched-domain:
domain 0: span 0,4 level SIBLING
groups: 0 (cpu_power = 589) 4 (cpu_power = 589)
domain 1: span 0-7 level MC
groups: 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178)
CPU1 attaching sched-domain:
domain 0: span 1,5 level SIBLING
groups: 1 (cpu_power = 589) 5 (cpu_power = 589)
domain 1: span 0-7 level MC
groups: 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178)
CPU2 attaching sched-domain:
domain 0: span 2,6 level SIBLING
groups: 2 (cpu_power = 589) 6 (cpu_power = 589)
domain 1: span 0-7 level MC
groups: 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178)
CPU3 attaching sched-domain:
domain 0: span 3,7 level SIBLING
groups: 3 (cpu_power = 589) 7 (cpu_power = 589)
domain 1: span 0-7 level MC
groups: 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178)
CPU4 attaching sched-domain:
domain 0: span 0,4 level SIBLING
groups: 4 (cpu_power = 589) 0 (cpu_power = 589)
domain 1: span 0-7 level MC
groups: 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178)
CPU5 attaching sched-domain:
domain 0: span 1,5 level SIBLING
groups: 5 (cpu_power = 589) 1 (cpu_power = 589)
domain 1: span 0-7 level MC
groups: 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178)
CPU6 attaching sched-domain:
domain 0: span 2,6 level SIBLING
groups: 6 (cpu_power = 589) 2 (cpu_power = 589)
domain 1: span 0-7 level MC
groups: 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178)
CPU7 attaching sched-domain:
domain 0: span 3,7 level SIBLING
groups: 7 (cpu_power = 589) 3 (cpu_power = 589)
domain 1: span 0-7 level MC
groups: 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178)
Time: 11:05:29 Date: 09/23/09
NET: Registered protocol family 16
ACPI: bus type pci registered
dca service started, version 1.8
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: Not using MMCONFIG.
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG at e0000000 - efffffff
ACPI Warning: Incorrect checksum in table [OEMB] - B8, should be B7 20090521 tbutils-246
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:00.0: PME# disabled
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:1a.0: reg 20 io port: [0xac00-0xac1f]
pci 0000:00:1a.1: reg 20 io port: [0xa880-0xa89f]
pci 0000:00:1a.2: reg 20 io port: [0xa800-0xa81f]
pci 0000:00:1a.7: reg 10 32bit mmio: [0xf8ffe000-0xf8ffe3ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10 64bit mmio: [0xf8ff8000-0xf8ffbfff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0xa480-0xa49f]
pci 0000:00:1d.1: reg 20 io port: [0xa400-0xa41f]
pci 0000:00:1d.2: reg 20 io port: [0xa080-0xa09f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xf8ffc000-0xf8ffc3ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0a00 (mask 0017)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 00ff)
pci 0000:00:1f.2: reg 10 io port: [0xa000-0xa007]
pci 0000:00:1f.2: reg 14 io port: [0x9c00-0x9c03]
pci 0000:00:1f.2: reg 18 io port: [0x9880-0x9887]
pci 0000:00:1f.2: reg 1c io port: [0x9800-0x9803]
pci 0000:00:1f.2: reg 20 io port: [0x9480-0x948f]
pci 0000:00:1f.2: reg 24 io port: [0x9400-0x940f]
pci 0000:00:1f.3: reg 10 64bit mmio: [0xf8ff7c00-0xf8ff7cff]
pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
pci 0000:00:1f.5: reg 10 io port: [0x9000-0x9007]
pci 0000:00:1f.5: reg 14 io port: [0x8c00-0x8c03]
pci 0000:00:1f.5: reg 18 io port: [0x8880-0x8887]
pci 0000:00:1f.5: reg 1c io port: [0x8800-0x8803]
pci 0000:00:1f.5: reg 20 io port: [0x8480-0x848f]
pci 0000:00:1f.5: reg 24 io port: [0x8400-0x840f]
pci 0000:02:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff]
pci 0000:02:00.0: reg 14 64bit mmio pref: [0xd0000000-0xdfffffff]
pci 0000:02:00.0: reg 1c 64bit mmio: [0xf9000000-0xf9ffffff]
pci 0000:02:00.0: reg 24 io port: [0xbc00-0xbc7f]
pci 0000:02:00.0: reg 30 32bit mmio pref: [0xfbbe0000-0xfbbfffff]
pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:03.0: bridge io port: [0xb000-0xbfff]
pci 0000:00:03.0: bridge 32bit mmio: [0xf9000000-0xfbbfffff]
pci 0000:00:03.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
pci 0000:05:00.0: reg 24 32bit mmio: [0xfbcfe000-0xfbcfffff]
pci 0000:05:00.0: PME# supported from D3hot
pci 0000:05:00.0: PME# disabled
pci 0000:05:00.1: reg 10 io port: [0xcc00-0xcc07]
pci 0000:05:00.1: reg 14 io port: [0xc880-0xc883]
pci 0000:05:00.1: reg 18 io port: [0xc800-0xc807]
pci 0000:05:00.1: reg 1c io port: [0xc480-0xc483]
pci 0000:05:00.1: reg 20 io port: [0xc400-0xc40f]
pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.1: bridge io port: [0xc000-0xcfff]
pci 0000:00:1c.1: bridge 32bit mmio: [0xfbc00000-0xfbcfffff]
pci 0000:06:00.0: reg 10 io port: [0xd800-0xd8ff]
pci 0000:06:00.0: reg 18 64bit mmio: [0xfbdff000-0xfbdfffff]
pci 0000:06:00.0: reg 20 64bit mmio pref: [0xf7ff0000-0xf7ffffff]
pci 0000:06:00.0: reg 30 32bit mmio pref: [0xfbdc0000-0xfbddffff]
pci 0000:06:00.0: supports D1 D2
pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:06:00.0: PME# disabled
pci 0000:00:1c.4: bridge io port: [0xd000-0xdfff]
pci 0000:00:1c.4: bridge 32bit mmio: [0xfbd00000-0xfbdfffff]
pci 0000:00:1c.4: bridge 64bit mmio pref: [0xf7f00000-0xf7ffffff]
pci 0000:07:00.0: reg 10 64bit mmio: [0xfbeff800-0xfbefffff]
pci 0000:07:00.0: reg 18 io port: [0xe800-0xe8ff]
pci 0000:07:00.0: supports D2
pci 0000:07:00.0: PME# supported from D2 D3hot D3cold
pci 0000:07:00.0: PME# disabled
pci 0000:00:1c.5: bridge io port: [0xe000-0xefff]
pci 0000:00:1c.5: bridge 32bit mmio: [0xfbe00000-0xfbefffff]
pci 0000:00:1e.0: transparent bridge
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 *7 10 11 12 14 15)
vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet clockevent registered
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 5
Switched to high resolution mode on CPU 6
Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 2
Switched to high resolution mode on CPU 3
Switched to high resolution mode on CPU 7
Switched to high resolution mode on CPU 4
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: iomem range 0xfbf00000-0xfbffffff has been reserved
system 00:01: iomem range 0xfc000000-0xfcffffff has been reserved
system 00:01: iomem range 0xfd000000-0xfdffffff has been reserved
system 00:01: iomem range 0xfe000000-0xfebfffff has been reserved
system 00:01: iomem range 0xfec8a000-0xfec8afff has been reserved
system 00:01: iomem range 0xfed10000-0xfed10fff has been reserved
system 00:08: ioport range 0xa00-0xadf has been reserved
system 00:08: ioport range 0xae0-0xaef has been reserved
system 00:09: ioport range 0x4d0-0x4d1 has been reserved
system 00:09: ioport range 0x800-0x87f has been reserved
system 00:09: ioport range 0x500-0x57f could not be reserved
system 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:09: iomem range 0xfed10000-0xfed103ff has been reserved
system 00:09: iomem range 0xfed10400-0xfed107ff has been reserved
system 00:09: iomem range 0xfed10800-0xfed10bff has been reserved
system 00:09: iomem range 0xfed10c00-0xfed10fff has been reserved
system 00:09: iomem range 0xfec8a000-0xfec8a3ff has been reserved
system 00:09: iomem range 0xfec8a400-0xfec8a7ff has been reserved
system 00:09: iomem range 0xfec8a800-0xfec8abff has been reserved
system 00:09: iomem range 0xfec8ac00-0xfec8afff has been reserved
system 00:09: iomem range 0xfed20000-0xfed3ffff has been reserved
system 00:09: iomem range 0xfed45000-0xfed89fff has been reserved
system 00:09: iomem range 0xfed20000-0xfed3ffff has been reserved
system 00:09: iomem range 0xfed40000-0xfed8ffff could not be reserved
system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
system 00:0c: iomem range 0x0-0x9ffff could not be reserved
system 00:0c: iomem range 0xc0000-0xcffff has been reserved
system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
system 00:0c: iomem range 0x100000-0xbfffffff could not be reserved
system 00:0c: iomem range 0xfed90000-0xffffffff could not be reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: disabled
pci 0000:00:01.0: MEM window: disabled
pci 0000:00:01.0: PREFETCH window: disabled
pci 0000:00:03.0: PCI bridge, secondary bus 0000:02
pci 0000:00:03.0: IO window: 0xb000-0xbfff
pci 0000:00:03.0: MEM window: 0xf9000000-0xfbbfffff
pci 0000:00:03.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
pci 0000:00:07.0: PCI bridge, secondary bus 0000:03
pci 0000:00:07.0: IO window: disabled
pci 0000:00:07.0: MEM window: disabled
pci 0000:00:07.0: PREFETCH window: disabled
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:04
pci 0000:00:1c.0: IO window: 0x1000-0x1fff
pci 0000:00:1c.0: MEM window: 0xc0000000-0xc01fffff
pci 0000:00:1c.0: PREFETCH window: 0x000000c0200000-0x000000c03fffff
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:05
pci 0000:00:1c.1: IO window: 0xc000-0xcfff
pci 0000:00:1c.1: MEM window: 0xfbc00000-0xfbcfffff
pci 0000:00:1c.1: PREFETCH window: 0x000000c0400000-0x000000c05fffff
pci 0000:00:1c.4: PCI bridge, secondary bus 0000:06
pci 0000:00:1c.4: IO window: 0xd000-0xdfff
pci 0000:00:1c.4: MEM window: 0xfbd00000-0xfbdfffff
pci 0000:00:1c.4: PREFETCH window: 0x000000f7f00000-0x000000f7ffffff
pci 0000:00:1c.5: PCI bridge, secondary bus 0000:07
pci 0000:00:1c.5: IO window: 0xe000-0xefff
pci 0000:00:1c.5: MEM window: 0xfbe00000-0xfbefffff
pci 0000:00:1c.5: PREFETCH window: 0x000000c0600000-0x000000c07fffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:08
pci 0000:00:1e.0: IO window: disabled
pci 0000:00:1e.0: MEM window: disabled
pci 0000:00:1e.0: PREFETCH window: disabled
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:07.0: setting latency timer to 64
pci 0000:00:1c.0: enabling device (0104 -> 0107)
alloc irq_desc for 17 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 16 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:02: resource 0 io: [0xb000-0xbfff]
pci_bus 0000:02: resource 1 mem: [0xf9000000-0xfbbfffff]
pci_bus 0000:02: resource 2 pref mem [0xd0000000-0xdfffffff]
pci_bus 0000:04: resource 0 io: [0x1000-0x1fff]
pci_bus 0000:04: resource 1 mem: [0xc0000000-0xc01fffff]
pci_bus 0000:04: resource 2 pref mem [0xc0200000-0xc03fffff]
pci_bus 0000:05: resource 0 io: [0xc000-0xcfff]
pci_bus 0000:05: resource 1 mem: [0xfbc00000-0xfbcfffff]
pci_bus 0000:05: resource 2 pref mem [0xc0400000-0xc05fffff]
pci_bus 0000:06: resource 0 io: [0xd000-0xdfff]
pci_bus 0000:06: resource 1 mem: [0xfbd00000-0xfbdfffff]
pci_bus 0000:06: resource 2 pref mem [0xf7f00000-0xf7ffffff]
pci_bus 0000:07: resource 0 io: [0xe000-0xefff]
pci_bus 0000:07: resource 1 mem: [0xfbe00000-0xfbefffff]
pci_bus 0000:07: resource 2 pref mem [0xc0600000-0xc07fffff]
pci_bus 0000:08: resource 3 io: [0x00-0xffff]
pci_bus 0000:08: resource 4 mem: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 3369k freed
microcode: CPU0 sig=0x106a4, pf=0x2, revision=0xf
microcode: CPU1 sig=0x106a4, pf=0x2, revision=0xf
microcode: CPU2 sig=0x106a4, pf=0x2, revision=0xf
microcode: CPU3 sig=0x106a4, pf=0x2, revision=0xf
microcode: CPU4 sig=0x106a4, pf=0x2, revision=0xf
microcode: CPU5 sig=0x106a4, pf=0x2, revision=0xf
microcode: CPU6 sig=0x106a4, pf=0x2, revision=0xf
microcode: CPU7 sig=0x106a4, pf=0x2, revision=0xf
Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
audit: initializing netlink socket (disabled)
type=2000 audit(1253703928.650:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.13)
Btrfs loaded
msgmni has been set to 11948
SELinux: Registering netfilter hooks
alg: No test for cipher_null (cipher_null-generic)
alg: No test for ecb(cipher_null) (ecb-cipher_null)
alg: No test for digest_null (digest_null-generic)
alg: No test for compress_null (compress_null-generic)
alg: No test for fcrypt (fcrypt-generic)
alg: No test for stdrng (krng)
alg: No test for ghash (ghash-generic)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered (default)
io scheduler anticipatory registered
io scheduler cfq registered
pci 0000:02:00.0: Boot video device
alloc irq_desc for 24 on node -1
alloc kstat_irqs on node -1
pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
pcieport-driver 0000:00:01.0: setting latency timer to 64
alloc irq_desc for 25 on node -1
alloc kstat_irqs on node -1
pcieport-driver 0000:00:03.0: irq 25 for MSI/MSI-X
pcieport-driver 0000:00:03.0: setting latency timer to 64
alloc irq_desc for 26 on node -1
alloc kstat_irqs on node -1
pcieport-driver 0000:00:07.0: irq 26 for MSI/MSI-X
pcieport-driver 0000:00:07.0: setting latency timer to 64
alloc irq_desc for 27 on node -1
alloc kstat_irqs on node -1
pcieport-driver 0000:00:1c.0: irq 27 for MSI/MSI-X
pcieport-driver 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 28 on node -1
alloc kstat_irqs on node -1
pcieport-driver 0000:00:1c.1: irq 28 for MSI/MSI-X
pcieport-driver 0000:00:1c.1: setting latency timer to 64
alloc irq_desc for 29 on node -1
alloc kstat_irqs on node -1
pcieport-driver 0000:00:1c.4: irq 29 for MSI/MSI-X
pcieport-driver 0000:00:1c.4: setting latency timer to 64
alloc irq_desc for 30 on node -1
alloc kstat_irqs on node -1
pcieport-driver 0000:00:1c.5: irq 30 for MSI/MSI-X
pcieport-driver 0000:00:1c.5: setting latency timer to 64
aer 0000:00:01.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:00:03.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:00:07.0:pcie02: AER service couldn't init device: no _OSC support
pci-stub: invalid id string ""
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90011800000, using 10240k, total 262144k
vesafb: mode is 1280x1024x32, linelength=5120, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 160x64
fb0: VESA VGA frame buffer device
vga16fb: initializing
vga16fb: mapped to 0xffff8800000a0000
fb1: VGA16 VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
ACPI: SSDT 00000000bf78e0c0 00403 (v01 DpgPmm P001Ist 00000011 INTL 20051117)
processor LNXCPU:00: registered as cooling_device0
ACPI: SSDT 00000000bf78e4d0 00403 (v01 DpgPmm P002Ist 00000012 INTL 20051117)
processor LNXCPU:01: registered as cooling_device1
ACPI: SSDT 00000000bf78e8e0 00403 (v01 DpgPmm P003Ist 00000012 INTL 20051117)
processor LNXCPU:02: registered as cooling_device2
ACPI: SSDT 00000000bf78ecf0 00403 (v01 DpgPmm P004Ist 00000012 INTL 20051117)
processor LNXCPU:03: registered as cooling_device3
ACPI: SSDT 00000000bf78f100 00403 (v01 DpgPmm P005Ist 00000012 INTL 20051117)
processor LNXCPU:04: registered as cooling_device4
ACPI: SSDT 00000000bf78f510 00403 (v01 DpgPmm P006Ist 00000012 INTL 20051117)
processor LNXCPU:05: registered as cooling_device5
ACPI: SSDT 00000000bf78f920 00403 (v01 DpgPmm P007Ist 00000012 INTL 20051117)
processor LNXCPU:06: registered as cooling_device6
ACPI: SSDT 00000000bf78fd30 00403 (v01 DpgPmm P008Ist 00000012 INTL 20051117)
processor LNXCPU:07: registered as cooling_device7
XENFS: not registering filesystem on non-xen platform
HDLC line discipline maxframe=4096
N_HDLC line discipline registered.
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
ipmi message handler version 39.2
ipmi device interface
IPMI System Interface driver.
ipmi_si: Unable to find any System Interface(s)
IPMI Watchdog: driver initialized
Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot.
brd: module loaded
loop: module loaded
ahci 0000:05:00.0: version 3.0
ahci 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
ahci 0000:05:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slum part
ahci 0000:05:00.0: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
ata1: SATA max UDMA/133 abar m8192@0xfbcfe000 port 0xfbcfe100 irq 17
ata2: SATA max UDMA/133 abar m8192@0xfbcfe000 port 0xfbcfe180 irq 17
ata_piix 0000:00:1f.2: version 2.13
alloc irq_desc for 19 on node -1
alloc kstat_irqs on node -1
ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 19
ata4: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 19
ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
ata_piix 0000:00:1f.5: setting latency timer to 64
scsi4 : ata_piix
scsi5 : ata_piix
ata5: SATA max UDMA/133 cmd 0x9000 ctl 0x8c00 bmdma 0x8480 irq 19
ata6: SATA max UDMA/133 cmd 0x8880 ctl 0x8800 bmdma 0x8488 irq 19
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:06:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
r8169 0000:06:00.0: setting latency timer to 64
alloc irq_desc for 31 on node -1
alloc kstat_irqs on node -1
r8169 0000:06:00.0: irq 31 for MSI/MSI-X
eth0: RTL8168c/8111c at 0xffffc90000c5a000, 00:24:21:32:03:4b, XID 1c4000c0 IRQ 31
usbcore: registered new interface driver hwa-rc
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
alloc irq_desc for 18 on node -1
alloc kstat_irqs on node -1
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf8ffe000
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.31-marco ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
alloc irq_desc for 23 on node -1
alloc kstat_irqs on node -1
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8ffc000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.31-marco ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ac00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.31-marco uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
alloc irq_desc for 21 on node -1
alloc kstat_irqs on node -1
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000a880
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.31-marco uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000a800
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.31-marco uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000a480
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.31-marco uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a400
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.31-marco uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a080
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 2.6.31-marco uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
usbcore: registered new interface driver wusb-cbaf
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
drivers/input/serio/i8042.c: 20 -> i8042 (command) [0]
drivers/input/serio/i8042.c: 65 <- i8042 (return) [0]
drivers/input/serio/i8042.c: 60 -> i8042 (command) [0]
drivers/input/serio/i8042.c: 74 -> i8042 (parameter) [0]
drivers/input/serio/i8042.c: Interrupt 1, without any data [0]
drivers/input/serio/i8042.c: 60 -> i8042 (command) [0]
drivers/input/serio/i8042.c: 65 -> i8042 (parameter) [0]
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
drivers/input/serio/i8042.c: f2 -> i8042 (kbd-data) [1]
I2O subsystem v1.325
i2o: max drivers = 8
I2O Configuration OSM v1.323
I2O Bus Adapter OSM v1.317
I2O Block Device OSM v1.325
I2O SCSI Peripheral OSM v1.316
I2O ProcFS OSM v1.316
i2c /dev entries driver
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 0, 1) [6]
coretemp coretemp.0: Using relative temperature scale!
coretemp coretemp.1: Using relative temperature scale!
coretemp coretemp.2: Using relative temperature scale!
ata2: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 301)
ata6: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATAPI: TSSTcorp CDDVDW SH-S223F, SB03, max UDMA/100, ATAPI AN
ata1.00: configured for UDMA/100
scsi 0:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223F SB03 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sr 0:0:0:0: Attached scsi generic sg0 type 5
drivers/input/serio/i8042.c: ed -> i8042 (kbd-data) [506]
ata3.00: SATA link down (SStatus 0 SControl 300)
ata3.01: SATA link down (SStatus 0 SControl 300)
drivers/input/serio/i8042.c: 60 -> i8042 (command) [706]
drivers/input/serio/i8042.c: 64 -> i8042 (parameter) [706]
drivers/input/serio/i8042.c: 60 -> i8042 (command) [706]
drivers/input/serio/i8042.c: 65 -> i8042 (parameter) [706]
drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 0, 0) [706]
ata4.00: SATA link down (SStatus 0 SControl 300)
ata4.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.01: ATA-7: INTEL SSDSA2MH080G1GC, 045C8610, max UDMA/133
ata4.01: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/31)
ata4.01: configured for UDMA/133
scsi 3:0:1:0: Direct-Access ATA INTEL SSDSA2MH08 045C PQ: 0 ANSI: 5
sd 3:0:1:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
sd 3:0:1:0: Attached scsi generic sg1 type 0
sd 3:0:1:0: [sda] Write Protect is off
sd 3:0:1:0: [sda] Mode Sense: 00 3a 00 00
sd 3:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
coretemp coretemp.3: Using relative temperature scale!
drivers/input/serio/i8042.c: Interrupt 1, without any data [6142]
sda:
coretemp coretemp.4: Using relative temperature scale!
coretemp coretemp.5: Using relative temperature scale!
coretemp coretemp.6: Using relative temperature scale!
coretemp coretemp.7: Using relative temperature scale!
sda1 sda2 sda3 sda4
cpuidle: using governor ladder
cpuidle: using governor menu
sd 3:0:1:0: [sda] Attached SCSI disk
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
Advanced Linux Sound Architecture Driver Version 1.0.21.
input: PC Speaker as /devices/platform/pcspkr/input/input2
alloc irq_desc for 22 on node -1
alloc kstat_irqs on node -1
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: setting latency timer to 64
hda_codec: ALC889: BIOS auto-probing.
ALSA sound/pci/hda/hda_codec.c:3881: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0)
ALSA sound/pci/hda/hda_codec.c:3885: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3889: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3890: mono: mono_out=0x0
ALSA sound/pci/hda/hda_codec.c:3893: dig-out=0x1e/0x0
ALSA sound/pci/hda/hda_codec.c:3901: inputs: mic=0x18, fmic=0x19, line=0x1a, fline=0x0, cd=0x0, aux=0x0
ALSA sound/pci/hda/patch_realtek.c:1282: realtek: No valid SSID, checking pincfg 0x4007f603 for NID 0x1d
ALSA sound/pci/hda/patch_realtek.c:1298: realtek: Enabling init ASM_ID=0xf603 CODEC_ID=10ec0889
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input3
ALSA device list:
#0: Dummy 1
usb 5-1: new low speed USB device using uhci_hcd and address 2
#1: Internal PC-Speaker at port 0x61
#2: HDA Intel at 0xf8ff8000 irq 22
oprofile: using NMI interrupt.
IPv4 over IPv4 tunneling driver
arp_tables: (C) 2002 David S. Miller
TCP bic registered
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
NET: Registered protocol family 15
Bridge firewalling registered
Ebtables v2.0 registered
usb 5-1: New USB device found, idVendor=046d, idProduct=c01a
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1: Product: USB-PS/2 Optical Mouse
usb 5-1: Manufacturer: Logitech
usb 5-1: configuration #1 chosen from 1 choice
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input4
generic-usb 0003:046D:C01A.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.2-1/input0
PM: Resume from disk failed.
registered taskstats version 1
Magic number: 9:425:75
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
Freeing unused kernel memory: 1332k freed
Write protecting the kernel read-only data: 7576k
EXT4-fs (sda3): INFO: recovery required on readonly filesystem
EXT4-fs (sda3): write access will be enabled during recovery
EXT4-fs (sda3): barriers enabled
kjournald2 starting: pid 200, dev sda3:8, commit interval 5 seconds
EXT4-fs (sda3): delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs (sda3): recovery complete
EXT4-fs (sda3): mounted filesystem with ordered data mode
SELinux: 8192 avtab hash slots, 137865 rules.
SELinux: 8192 avtab hash slots, 137865 rules.
SELinux: 8 users, 12 roles, 2861 types, 129 bools, 1 sens, 1024 cats
SELinux: 75 classes, 137865 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev sda3, type ext4), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
type=1403 audit(1253703939.730:2): policy loaded auid=4294967295 ses=4294967295
type=1400 audit(1253703939.895:3): avc: denied { read } for pid=218 comm="readahead" name="root" dev=tmpfs ino=1361 scontext=system_u:system_r:readahead_t:s0 tcontext=system_u:object_r:tmpfs_t:s0 tclass=blk_file
type=1400 audit(1253703939.996:4): avc: denied { open } for pid=218 comm="readahead" name="root" dev=tmpfs ino=1361 scontext=system_u:system_r:readahead_t:s0 tcontext=system_u:object_r:tmpfs_t:s0 tclass=blk_file
udev: starting version 145
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nvidia 0000:02:00.0: setting latency timer to 64
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 190.25 Thu Aug 20 16:36:08 PDT 2009
EXT4-fs (sda3): internal journal on sda3:8
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with writeback data mode.
SELinux: initialized (dev sda1, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
device fsid cd4d4a148f85c0c7-2771945e31146ca8 devid 1 transid 7694 /dev/sda2
Btrfs detected SSD devices, enabling SSD mode
SELinux: initialized (dev sda2, type btrfs), uses xattr
Adding 3167804k swap on /dev/sda4. Priority:-1 extents:1 across:3167804k SS
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
microcode: CPU0 updated to revision 0x10, date = 2009-02-20
microcode: CPU1 updated to revision 0x10, date = 2009-02-20
microcode: CPU2 updated to revision 0x10, date = 2009-02-20
microcode: CPU3 updated to revision 0x10, date = 2009-02-20
microcode: CPU4 updated to revision 0x10, date = 2009-02-20
microcode: CPU5 updated to revision 0x10, date = 2009-02-20
microcode: CPU6 updated to revision 0x10, date = 2009-02-20
microcode: CPU7 updated to revision 0x10, date = 2009-02-20
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
type=1400 audit(1253703943.720:5): avc: denied { module_request } for pid=867 comm="rpcbind" scontext=system_u:system_r:rpcbind_t:s0 tcontext=system_u:system_r:kernel_t:s0 tclass=system
NET: Registered protocol family 10
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: Current git: no keyboard when booting in verbose mode
2009-09-23 12:16 ` Marc Dionne
@ 2009-09-23 16:44 ` Dmitry Torokhov
0 siblings, 0 replies; 3+ messages in thread
From: Dmitry Torokhov @ 2009-09-23 16:44 UTC (permalink / raw)
To: Marc Dionne; +Cc: Jiri Kosina, linux-kernel, linux-input
On Wed, Sep 23, 2009 at 08:16:02AM -0400, Marc Dionne wrote:
> On Wed, Sep 23, 2009 at 5:09 AM, Jiri Kosina <jkosina@suse.cz> wrote:
> >
> > [ adding some CCs ]
> >
> > On Tue, 22 Sep 2009, Marc Dionne wrote:
> >
> >> I'm having issues with the current kernel in git, and wondering if this
> >> will ring a bell for anyone. The main symptom is that on most boots the
> >> keyboard is not detected - the system gets to the console login prompt
> >> but input is not recognized. Sometimes (rarely) the keyboard will be ok
> >> at the console, but the keyboard and mouse are non functional once in X.
> >
> > Are both keyboard and mouse in question PS/2?
>
> No - keyboard is PS/2 but the mouse is USB.
>
> >> - On a failed boot with no keyboard, this line is missing from dmesg:
> >> AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
> >
> > Could you please provide output from kernel booted with 'i8042.debug' from
> > the failing case?
>
> Attached are the dmesg output for a successful boot (with "quiet") and
> a failed one. I see that the i8042.debug output is quite different
> for the 2 cases.
>
Hmm, nothing obvious jumps at me... Just keyboard not responding at all
in the bad case. Any chance of bisecting? Maybe check before first input
merge and after?
--
Dmitry
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2009-09-23 16:44 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <6041d2000909221754n2ee1982xe08f938a35358c00@mail.gmail.com>
2009-09-23 9:09 ` Current git: no keyboard when booting in verbose mode Jiri Kosina
2009-09-23 12:16 ` Marc Dionne
2009-09-23 16:44 ` Dmitry Torokhov
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).