Re: [PATCH] mfd: Add power control platform data to SDHI driver

[Paul Mundt <lethal@linux-sh.org>]

On Fri, Nov 27, 2009 at 01:31:27PM +0900, Magnus Damm wrote:
> This patch adds platform data with a function for power
> control to the SDHI driver. The idea is that board specific
> code can provide their own functions so power can be enabled
> and disabled for the sd-cards.

On Fri, Nov 27, 2009 at 01:36:58PM +0900, Magnus Damm wrote:
> This patch adds support for SDHI power control to the
> Ecovec board. Platform data and power control callbacks
> for SDHI0 and SDHI1 are added. Power is by default off.

On Fri, Nov 27, 2009 at 02:16:21PM +0900, Magnus Damm wrote:
> Add sh7724 code to save and restore CPG state during
> R-standby. Only CPG registers IRDACLKCR and SPUCLKCR
> require software save and restore.

On Fri, Nov 27, 2009 at 04:32:24PM +0900, Magnus Damm wrote:
> This patch moves the KEYSC header file from the
> SuperH specific asm directory to a place where
> it can be shared by multiple architectures.

On Fri, Nov 27, 2009 at 04:38:01PM +0900, Magnus Damm wrote:
> This file breaks out the SuperH PFC code from
> arch/sh/kernel/gpio.c + arch/sh/include/asm/gpio.h
> to drivers/sh/pfc.c + include/linux/sh_pfc.h.
> 
> Similar to the INTC stuff. The non-SuperH specific
> file location makes it possible to share the code
> between multiple architectures.

On Fri, Nov 27, 2009 at 06:28:03PM +0900, Magnus Damm wrote:
> This patch improves the serial port communication quality
> of port YC401 on the KFR2R09 board. With this fix serial
> console is fine at 115200 - up and down keys now work as
> expected. Thanks to Hirohide Yamasaki for this fix.

All applied, thanks.