From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
To: linux-input@vger.kernel.org
Cc: linux-acpi@vger.kernel.org, Len Brown <lenb@kernel.org>,
Herton Ronaldo Krzesinski <herton@mandriva.com.br>,
Harald Welte <laforge@gnumonks.org>,
Corentin Chary <corentincj@iksaif.net>,
Carlos Corbacho <carlos@strangeworlds.co.uk>,
Wu Zhangjin <wuzhangjin@gmail.com>
Subject: [PATCH 7/8] Input: topstar-laptop - switch to using sparse keymap library
Date: Wed, 02 Dec 2009 01:24:41 -0800 [thread overview]
Message-ID: <20091202092441.30409.17280.stgit@localhost.localdomain> (raw)
In-Reply-To: <20091202091056.30409.50455.stgit@localhost.localdomain>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
drivers/platform/x86/Kconfig | 1
drivers/platform/x86/topstar-laptop.c | 146 ++++++++++++---------------------
2 files changed, 52 insertions(+), 95 deletions(-)
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index e555d39..00e94b0 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -405,6 +405,7 @@ config TOPSTAR_LAPTOP
tristate "Topstar Laptop Extras"
depends on ACPI
depends on INPUT
+ select INPUT_SPARSEKMAP
---help---
This driver adds support for hotkeys found on Topstar laptops.
diff --git a/drivers/platform/x86/topstar-laptop.c b/drivers/platform/x86/topstar-laptop.c
index 02f3d4e..7ca08db 100644
--- a/drivers/platform/x86/topstar-laptop.c
+++ b/drivers/platform/x86/topstar-laptop.c
@@ -18,6 +18,7 @@
#include <linux/init.h>
#include <linux/acpi.h>
#include <linux/input.h>
+#include <linux/input/sparse-keymap.h>
#define ACPI_TOPSTAR_CLASS "topstar"
@@ -25,52 +26,25 @@ struct topstar_hkey {
struct input_dev *inputdev;
};
-struct tps_key_entry {
- u8 code;
- u16 keycode;
+static const struct key_entry topstar_keymap[] = {
+ { KE_KEY, 0x80, { KEY_BRIGHTNESSUP } },
+ { KE_KEY, 0x81, { KEY_BRIGHTNESSDOWN } },
+ { KE_KEY, 0x83, { KEY_VOLUMEUP } },
+ { KE_KEY, 0x84, { KEY_VOLUMEDOWN } },
+ { KE_KEY, 0x85, { KEY_MUTE } },
+ { KE_KEY, 0x86, { KEY_SWITCHVIDEOMODE } },
+ { KE_KEY, 0x87, { KEY_F13 } }, /* touchpad enable/disable key */
+ { KE_KEY, 0x88, { KEY_WLAN } },
+ { KE_KEY, 0x8a, { KEY_WWW } },
+ { KE_KEY, 0x8b, { KEY_MAIL } },
+ { KE_KEY, 0x8c, { KEY_MEDIA } },
+ { KE_KEY, 0x96, { KEY_F14 } }, /* G key? */
+ { KE_END, 0 }
};
-static struct tps_key_entry topstar_keymap[] = {
- { 0x80, KEY_BRIGHTNESSUP },
- { 0x81, KEY_BRIGHTNESSDOWN },
- { 0x83, KEY_VOLUMEUP },
- { 0x84, KEY_VOLUMEDOWN },
- { 0x85, KEY_MUTE },
- { 0x86, KEY_SWITCHVIDEOMODE },
- { 0x87, KEY_F13 }, /* touchpad enable/disable key */
- { 0x88, KEY_WLAN },
- { 0x8a, KEY_WWW },
- { 0x8b, KEY_MAIL },
- { 0x8c, KEY_MEDIA },
- { 0x96, KEY_F14 }, /* G key? */
- { }
-};
-
-static struct tps_key_entry *tps_get_key_by_scancode(int code)
-{
- struct tps_key_entry *key;
-
- for (key = topstar_keymap; key->code; key++)
- if (code == key->code)
- return key;
-
- return NULL;
-}
-
-static struct tps_key_entry *tps_get_key_by_keycode(int code)
-{
- struct tps_key_entry *key;
-
- for (key = topstar_keymap; key->code; key++)
- if (code == key->keycode)
- return key;
-
- return NULL;
-}
-
static void acpi_topstar_notify(struct acpi_device *device, u32 event)
{
- struct tps_key_entry *key;
+ struct key_entry *key;
static bool dup_evnt[2];
bool *dup;
struct topstar_hkey *hkey = acpi_driver_data(device);
@@ -92,13 +66,16 @@ static void acpi_topstar_notify(struct acpi_device *device, u32 event)
if (event == 0x97)
event = 0x96;
- key = tps_get_key_by_scancode(event);
+ key = sparse_keymap_entry_from_scancode(hkey->inputdev, event);
if (key) {
- input_report_key(hkey->inputdev, key->keycode, 1);
- input_sync(hkey->inputdev);
- input_report_key(hkey->inputdev, key->keycode, 0);
- input_sync(hkey->inputdev);
- return;
+ switch (key->type) {
+ case KE_KEY:
+ input_report_key(hkey->inputdev, key->keycode, 1);
+ input_sync(hkey->inputdev);
+ input_report_key(hkey->inputdev, key->keycode, 0);
+ input_sync(hkey->inputdev);
+ return;
+ }
}
/* Known non hotkey events don't handled or that we don't care yet */
@@ -126,63 +103,41 @@ static int acpi_topstar_fncx_switch(struct acpi_device *device, bool state)
return 0;
}
-static int topstar_getkeycode(struct input_dev *dev, int scancode, int *keycode)
-{
- struct tps_key_entry *key = tps_get_key_by_scancode(scancode);
-
- if (!key)
- return -EINVAL;
-
- *keycode = key->keycode;
- return 0;
-}
-
-static int topstar_setkeycode(struct input_dev *dev, int scancode, int keycode)
-{
- struct tps_key_entry *key;
- int old_keycode;
-
- if (keycode < 0 || keycode > KEY_MAX)
- return -EINVAL;
-
- key = tps_get_key_by_scancode(scancode);
-
- if (!key)
- return -EINVAL;
-
- old_keycode = key->keycode;
- key->keycode = keycode;
- set_bit(keycode, dev->keybit);
- if (!tps_get_key_by_keycode(old_keycode))
- clear_bit(old_keycode, dev->keybit);
- return 0;
-}
-
static int acpi_topstar_init_hkey(struct topstar_hkey *hkey)
{
- struct tps_key_entry *key;
+ struct input_dev *input;
+ int error;
- hkey->inputdev = input_allocate_device();
- if (!hkey->inputdev) {
+ input = input_allocate_device();
+ if (!input) {
pr_err("Unable to allocate input device\n");
- return -ENODEV;
+ return -ENOMEM;
}
- hkey->inputdev->name = "Topstar Laptop extra buttons";
- hkey->inputdev->phys = "topstar/input0";
- hkey->inputdev->id.bustype = BUS_HOST;
- hkey->inputdev->getkeycode = topstar_getkeycode;
- hkey->inputdev->setkeycode = topstar_setkeycode;
- for (key = topstar_keymap; key->code; key++) {
- set_bit(EV_KEY, hkey->inputdev->evbit);
- set_bit(key->keycode, hkey->inputdev->keybit);
+
+ input->name = "Topstar Laptop extra buttons";
+ input->phys = "topstar/input0";
+ input->id.bustype = BUS_HOST;
+
+ error = sparse_keymap_setup(input, topstar_keymap, NULL);
+ if (error) {
+ pr_err("Unable to setup input device keymap\n");
+ goto err_free_dev;
}
- if (input_register_device(hkey->inputdev)) {
+
+ error = input_register_device(input);
+ if (error) {
pr_err("Unable to register input device\n");
- input_free_device(hkey->inputdev);
- return -ENODEV;
+ goto err_free_keymap;
}
+ hkey->inputdev = input;
return 0;
+
+ err_free_keymap:
+ sparse_keymap_free(input);
+ err_free_dev:
+ input_free_device(input);
+ return error;
}
static int acpi_topstar_add(struct acpi_device *device)
@@ -216,6 +171,7 @@ static int acpi_topstar_remove(struct acpi_device *device, int type)
acpi_topstar_fncx_switch(device, false);
+ sparse_keymap_free(tps_hkey->inputdev);
input_unregister_device(tps_hkey->inputdev);
kfree(tps_hkey);
next prev parent reply other threads:[~2009-12-02 9:24 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-12-02 9:24 [PATCH 0/8] [RFC/RFT] Implement sparse keymap library Dmitry Torokhov
2009-12-02 9:24 ` [PATCH 1/8] Input: add generic support for sparse keymaps Dmitry Torokhov
2009-12-02 9:24 ` [PATCH 2/8] Input: wistron_btns - switch to using sparse keymap library Dmitry Torokhov
2009-12-02 9:24 ` [PATCH 3/8] Input: dell-wmi " Dmitry Torokhov
2009-12-02 9:24 ` [PATCH 4/8] Input: hp-wmi " Dmitry Torokhov
2009-12-03 9:58 ` Anisse Astier
2009-12-03 10:03 ` Dmitry Torokhov
2009-12-02 9:24 ` [PATCH 5/8] Input: eeepc-laptop " Dmitry Torokhov
2009-12-02 9:24 ` [PATCH 6/8] Input: asus-laptop " Dmitry Torokhov
2009-12-02 9:24 ` Dmitry Torokhov [this message]
2009-12-02 9:24 ` [PATCH 8/8] Input: panasonic-laptop " Dmitry Torokhov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20091202092441.30409.17280.stgit@localhost.localdomain \
--to=dmitry.torokhov@gmail.com \
--cc=carlos@strangeworlds.co.uk \
--cc=corentincj@iksaif.net \
--cc=herton@mandriva.com.br \
--cc=laforge@gnumonks.org \
--cc=lenb@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=wuzhangjin@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).