From: Anisse Astier <anisse@astier.eu>
To: linux-input@vger.kernel.org, linux-acpi@vger.kernel.org
Cc: Len Brown <lenb@kernel.org>,
Carlos Corbacho <carlos@strangeworlds.co.uk>,
Dmitry Torokhov <dmitry.torokhov@gmail.com>
Subject: [RFC PATCH 1/2] Input: add msi-wmi driver to support hotkeys in MSI Windtop AE1900-WT
Date: Wed, 2 Dec 2009 19:26:03 +0100 [thread overview]
Message-ID: <20091202192603.3e1de98a@destiny.ordissimo> (raw)
Signed-off-by: Anisse Astier <anisse@astier.eu>
---
Hi,
This driver (intiated by
http://sysmic.org/dotclear2/index.php?post/2009/06/02/83-msi-wmi-support) is
aimed at supporting WMI based hotkeys on MSI Windtop all-in-one AE1900-WT.
This patch contains both WMI and DMI auto loading. Once Mathew Garrett's
patch for wmi autoloading is upstream (now in acpi-test), DMI auto loading
could (should?) be removed.
Also, Dmitry is in the process of factoring code for sparse keymaps. The
second patch adds support its sparse keymap lib, removing a lot of code.
These patches are based on linux-input tree, and have been tested on the
hardware with and without the sparse keymap patch.
drivers/platform/x86/Kconfig | 11 ++
drivers/platform/x86/Makefile | 1 +
drivers/platform/x86/msi-wmi.c | 212 ++++++++++++++++++++++++++++++++++++++++
3 files changed, 224 insertions(+), 0 deletions(-)
create mode 100644 drivers/platform/x86/msi-wmi.c
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index 1b27e4d..fe142af 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -441,4 +441,15 @@ config ACPI_TOSHIBA
If you have a legacy free Toshiba laptop (such as the Libretto L1
series), say Y.
+
+config MSI_WMI
+ tristate "MSI WMI extras"
+ depends on ACPI_WMI
+ depends on INPUT
+ ---help---
+ Say Y here if you want to support WMI-based hotkeys on MSI all-in-one
+ WindTop AE1900-WT.
+
+ To compile this driver as a module, choose M here: the module will
+ be called msi-wmi.
endif # X86_PLATFORM_DEVICES
diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
index d1c1621..22a0c78 100644
--- a/drivers/platform/x86/Makefile
+++ b/drivers/platform/x86/Makefile
@@ -21,3 +21,4 @@ obj-$(CONFIG_ACPI_WMI) += wmi.o
obj-$(CONFIG_ACPI_ASUS) += asus_acpi.o
obj-$(CONFIG_TOPSTAR_LAPTOP) += topstar-laptop.o
obj-$(CONFIG_ACPI_TOSHIBA) += toshiba_acpi.o
+obj-$(CONFIG_MSI_WMI) += msi-wmi.o
diff --git a/drivers/platform/x86/msi-wmi.c b/drivers/platform/x86/msi-wmi.c
new file mode 100644
index 0000000..fb6d5bd
--- /dev/null
+++ b/drivers/platform/x86/msi-wmi.c
@@ -0,0 +1,212 @@
+/*
+ * MSI WMI hotkeys
+ *
+ * Copyright (C) 2009 Jérôme Pouiller <jezz@sysmic.org>
+ *
+ * Portions based on hp-wmi.c:
+ * Copyright (C) 2008 Red Hat <mjg@redhat.com>
+ *
+ * Portions based on wistron_btns.c:
+ * Copyright (C) 2005 Miloslav Trmac <mitr@volny.cz>
+ * Copyright (C) 2005 Bernhard Rosenkraenzer <bero@arklinux.org>
+ * Copyright (C) 2005 Dmitry Torokhov <dtor@mail.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/input.h>
+#include <linux/acpi.h>
+#include <linux/jiffies.h>
+
+#define MSIWMI_EVENT_GUID "b6f3eef2-3d2f-49dc-9de3-85bce18c62f2"
+
+struct key_entry {
+ u16 code;
+ u16 keycode;
+};
+
+static struct key_entry msi_wmi_keymap[] = {
+ /*Brightness keys should be used for a backlight driver*/
+ {208, KEY_BRIGHTNESSUP},
+ {209, KEY_BRIGHTNESSDOWN},
+ {210, KEY_VOLUMEUP},
+ {211, KEY_VOLUMEDOWN},
+ {0}
+};
+
+static struct input_dev *msi_wmi_input_dev;
+static unsigned long long msi_wmi_time_last_press;
+static unsigned pression_timeout = 10;
+
+static struct key_entry *msi_wmi_get_entry_by_scancode(int code)
+{
+ struct key_entry *key;
+
+ for (key = msi_wmi_keymap; key->code; key++)
+ if (code == key->code)
+ return key;
+
+ return NULL;
+}
+
+static struct key_entry *msi_wmi_get_entry_by_keycode(int keycode)
+{
+ struct key_entry *key;
+
+ for (key = msi_wmi_keymap; key->code; key++)
+ if (keycode == key->keycode)
+ return key;
+
+ return NULL;
+}
+
+static void msi_wmi_notify(u32 value, void *context)
+{
+ struct acpi_buffer response = { ACPI_ALLOCATE_BUFFER, NULL };
+ static struct key_entry *key;
+ union acpi_object *obj;
+
+ acpi_status ret;
+ ret = wmi_get_event_data(value, &response);
+ obj = (union acpi_object *)response.pointer;
+
+ if (!obj || obj->type != ACPI_TYPE_INTEGER) {
+ printk(KERN_INFO "MSI WMI: Unknown response received\n");
+ return;
+ }
+
+ if (jiffies_to_msecs(get_jiffies_64() - msi_wmi_time_last_press)
+ > pression_timeout) {
+ printk(KERN_DEBUG
+ "MSI WMI: event correctly received: %llu\n",
+ obj->integer.value);
+ msi_wmi_time_last_press = get_jiffies_64();
+ key = msi_wmi_get_entry_by_scancode(obj->integer.value);
+ input_report_key(msi_wmi_input_dev, key->keycode, 1);
+ input_sync(msi_wmi_input_dev);
+ input_report_key(msi_wmi_input_dev, key->keycode, 0);
+ input_sync(msi_wmi_input_dev);
+ }
+}
+
+static int msi_wmi_getkeycode(struct input_dev *dev, int scancode, int *keycode)
+{
+ struct key_entry *key = msi_wmi_get_entry_by_scancode(scancode);
+
+ if (key && key->code) {
+ *keycode = key->keycode;
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static int msi_wmi_setkeycode(struct input_dev *dev, int scancode, int keycode)
+{
+ struct key_entry *key;
+ int old_keycode;
+
+ if (keycode < 0 || keycode > KEY_MAX)
+ return -EINVAL;
+
+ key = msi_wmi_get_entry_by_scancode(scancode);
+ if (key && key->code) {
+ old_keycode = key->keycode;
+ key->keycode = keycode;
+ set_bit(keycode, dev->keybit);
+ if (!msi_wmi_get_entry_by_keycode(old_keycode))
+ clear_bit(old_keycode, dev->keybit);
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static int __init msi_wmi_input_setup(void)
+{
+ struct key_entry *key;
+ int err;
+
+ msi_wmi_input_dev = input_allocate_device();
+
+ msi_wmi_input_dev->name = "MSI WMI hotkeys";
+ msi_wmi_input_dev->phys = "wmi/input0";
+ msi_wmi_input_dev->id.bustype = BUS_HOST;
+ msi_wmi_input_dev->getkeycode = msi_wmi_getkeycode;
+ msi_wmi_input_dev->setkeycode = msi_wmi_setkeycode;
+
+ for (key = msi_wmi_keymap; key->code; key++) {
+ set_bit(EV_KEY, msi_wmi_input_dev->evbit);
+ set_bit(key->keycode, msi_wmi_input_dev->keybit);
+ }
+
+ err = input_register_device(msi_wmi_input_dev);
+
+ if (err)
+ input_free_device(msi_wmi_input_dev);
+
+ return err;
+}
+
+static int __init msi_wmi_init(void)
+{
+ int err;
+
+ msi_wmi_time_last_press = get_jiffies_64();
+ if (!wmi_has_guid(MSIWMI_EVENT_GUID)) {
+ printk(KERN_ERR
+ "This machine doesn't have MSI-hotkeys through WMI\n");
+ goto load_error;
+ }
+ err = wmi_install_notify_handler(MSIWMI_EVENT_GUID,
+ msi_wmi_notify, NULL);
+ if (err) {
+ printk(KERN_ERR
+ "MSI WMI: Error while installing notify handler\n");
+ goto load_error;
+ }
+
+ msi_wmi_input_setup();
+
+ return 0;
+load_error:
+ return -ENODEV;
+}
+
+static void __exit msi_wmi_exit(void)
+{
+ if (wmi_has_guid(MSIWMI_EVENT_GUID)) {
+ wmi_remove_notify_handler(MSIWMI_EVENT_GUID);
+ input_unregister_device(msi_wmi_input_dev);
+ }
+}
+
+module_init(msi_wmi_init);
+module_exit(msi_wmi_exit);
+module_param(pression_timeout, uint, 0);
+
+MODULE_AUTHOR("Jérôme Pouiller <jezz@sysmic.org>");
+MODULE_AUTHOR("Michael Bouchaud <michael@substantiel.fr");
+MODULE_AUTHOR("Anisse Astier <anisse@astier.eu");
+MODULE_DESCRIPTION("MSI all-in-one WMI hotkeys driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("wmi:" MSIWMI_EVENT_GUID);
+/*This one is useless if there is wmi-autoloading*/
+MODULE_ALIAS("dmi:bvnMICRO-STARINTERNATIONALCO.,LTD:*:svnMICRO-STARINTERNATIO"
+ "NALCO.,LTD:pnMS-6638:*:rnMS-7438:*:cvnMICRO-STARINTERNATIONALCO."
+ ",LTD:*");
+MODULE_PARM_DESC(pression_timeout,
+ "How much time interrupts are ignored between each pression");
--
1.6.5.3
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2009-12-02 19:21 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-12-02 18:26 Anisse Astier [this message]
2009-12-02 18:28 ` [RFC PATCH 2/2] Input: msi-wmi - switch to using sparse keymap library Anisse Astier
2009-12-02 18:48 ` Dmitry Torokhov
2009-12-03 3:11 ` [RFC PATCH 1/2] Input: add msi-wmi driver to support hotkeys in MSI Windtop AE1900-WT Dmitry Torokhov
2009-12-03 9:08 ` Anisse Astier
2009-12-03 9:34 ` Dmitry Torokhov
2009-12-03 16:49 ` Thomas Renninger
2009-12-04 10:15 ` Anisse Astier
2009-12-04 10:55 ` Thomas Renninger
2009-12-04 13:51 ` Anisse Astier
2009-12-04 15:20 ` Thomas Renninger
2009-12-04 15:35 ` Anisse Astier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20091202192603.3e1de98a@destiny.ordissimo \
--to=anisse@astier.eu \
--cc=carlos@strangeworlds.co.uk \
--cc=dmitry.torokhov@gmail.com \
--cc=lenb@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-input@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).