linux-input.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Bruno Prémont" <bonbons@linux-vserver.org>
To: Jiri Kosina <jkosina@suse.cz>
Cc: linux-input@vger.kernel.org, linux-usb@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	"Rick L. Vinyard Jr." <rvinyard@cs.nmsu.edu>,
	Nicu Pavel <npavel@ituner.com>
Subject: [PATCH 2/3] hid: add suspend/resume hooks for hid drivers
Date: Wed, 24 Feb 2010 17:01:12 +0100	[thread overview]
Message-ID: <20100224170112.576403ee@neptune.home> (raw)
In-Reply-To: <20100224163101.3622d69f@neptune.home>

Add suspend/resume hooks for HID drivers so these can do some
additional state adjustment when device gets suspended/resumed.

This patch calls these hooks from usbhid suspend/resume functions,
only calling suspend on plain suspend, not autosuspend.
(it might be worth adding an autosuspend parameter to suspend
hook and calling suspend in both cases)

Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org>
---
 drivers/hid/hid-core.c              |   19 ++-
 include/linux/hid.h                 |    8 +
 2 files changed, 36 insertions(+), 1 deletions(-)

diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c
index e2997a8..8ad1a98 100644
--- a/drivers/hid/usbhid/hid-core.c
+++ b/drivers/hid/usbhid/hid-core.c
@@ -1272,6 +1272,11 @@ static int hid_suspend(struct usb_interface *intf, pm_message_t message)
 		}
 
 	} else {
+		if (hid->driver && hid->driver->suspend) {
+			status = hid->driver->suspend(hid);
+			if (status < 0)
+				return status;
+		}
 		spin_lock_irq(&usbhid->lock);
 		set_bit(HID_REPORTED_IDLE, &usbhid->iofl);
 		spin_unlock_irq(&usbhid->lock);
@@ -1326,6 +1331,11 @@ static int hid_resume(struct usb_interface *intf)
 		hid_io_error(hid);
 	usbhid_restart_queues(usbhid);
 
+	if (hid->driver && hid->driver->resume) {
+		int ret = hid->driver->resume(hid);
+		if (ret < 0 && status == 0)
+			status = ret;
+	}
 	dev_dbg(&intf->dev, "resume status %d\n", status);
 	return 0;
 }
@@ -1334,9 +1344,16 @@ static int hid_reset_resume(struct usb_interface *intf)
 {
 	struct hid_device *hid = usb_get_intfdata(intf);
 	struct usbhid_device *usbhid = hid->driver_data;
+	int status;
 
 	clear_bit(HID_REPORTED_IDLE, &usbhid->iofl);
-	return hid_post_reset(intf);
+	status = hid_post_reset(intf);
+	if (hid->driver && hid->driver->reset_resume) {
+		int ret = hid->driver->reset_resume(hid);
+		if (ret < 0 && status == 0)
+			status = ret;
+	}
+	return status;
 }
 
 #endif /* CONFIG_PM */
diff --git a/include/linux/hid.h b/include/linux/hid.h
index 8709365..b4409f1 100644
--- a/include/linux/hid.h
+++ b/include/linux/hid.h
@@ -589,6 +589,9 @@ struct hid_usage_id {
  * @report_fixup: called before report descriptor parsing (NULL means nop)
  * @input_mapping: invoked on input registering before mapping an usage
  * @input_mapped: invoked on input registering after mapping an usage
+ * @suspend: invoked on suspend (NULL means nop)
+ * @resume: invoked on resume if device was not reset (NULL means nop)
+ * @reset_resume: invoked on resume if device was reset (NULL means nop)
  *
  * raw_event and event should return 0 on no action performed, 1 when no
  * further processing should be done and negative on error
@@ -629,6 +632,11 @@ struct hid_driver {
 	int (*input_mapped)(struct hid_device *hdev,
 			struct hid_input *hidinput, struct hid_field *field,
 			struct hid_usage *usage, unsigned long **bit, int *max);
+#ifdef CONFIG_PM
+	int (*suspend)(struct hid_device *hdev);
+	int (*resume)(struct hid_device *hdev);
+	int (*reset_resume)(struct hid_device *hdev);
+#endif
 /* private: */
 	struct device_driver driver;
 };

  reply	other threads:[~2010-02-24 16:01 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20100221002001.0a7e05a7@neptune.home>
     [not found] ` <20100221002001.0a7e05a7-hY15tx4IgV39zxVx7UNMDg@public.gmane.org>
2010-02-24 16:00   ` [PATCH 1/3] picolcd: driver for PicoLCD HID device Bruno Prémont
2010-02-24 16:01     ` Bruno Prémont [this message]
2010-02-25  4:19       ` [PATCH 2/3] hid: add suspend/resume hooks for hid drivers Oliver Neukum
2010-02-25 10:12         ` Bruno Prémont
2010-02-24 18:27     ` [PATCH 1/3] picolcd: driver for PicoLCD HID device Oliver Neukum
     [not found]       ` <201002241927.53532.oliver-GvhC2dPhHPQdnm+yROfE0A@public.gmane.org>
2010-02-24 21:44         ` Rick L. Vinyard, Jr.
2010-02-25  4:11           ` Oliver Neukum
2010-02-25 11:00           ` Jiri Kosina
2010-02-25 15:34             ` Rick L. Vinyard, Jr.
2010-02-26  8:12               ` Dmitry Torokhov
2010-03-03  6:04     ` Pavel Machek
     [not found] ` <20100224163101.3622d69f@neptune.home>
     [not found]   ` <20100224170049.0d04af3c-hY15tx4IgV39zxVx7UNMDg@public.gmane.org>
     [not found]     ` <20100224163101.3622d69f-hY15tx4IgV39zxVx7UNMDg@public.gmane.org>
2010-02-24 16:01       ` [PATCH 3/3] hid-picolcd: make use of new suspend/resume hooks Bruno Prémont
2010-02-25 11:07     ` [PATCH 1/3] picolcd: driver for PicoLCD HID device Jiri Kosina
     [not found]       ` <alpine.LNX.2.00.1002251201430.30967-ztGlSCb7Y1iN3ZZ/Hiejyg@public.gmane.org>
2010-02-25 11:32         ` Bruno Prémont
2010-02-25 15:18           ` Jiri Kosina
2010-02-25 15:29             ` Bruno Prémont
     [not found]             ` <alpine.LNX.2.00.1002251615570.30967-ztGlSCb7Y1iN3ZZ/Hiejyg@public.gmane.org>
2010-03-13 19:39               ` Bruno Prémont
2010-03-13 21:35                 ` Alan Stern
2010-03-13 22:13                   ` [PATCH] hid: Register debugfs entries before adding device Bruno Prémont
2010-03-15 13:48                     ` Jiri Kosina
     [not found]           ` <20100225123214.0523a310-hY15tx4IgV39zxVx7UNMDg@public.gmane.org>
2010-02-25 17:52             ` [PATCH 1/3] picolcd: driver for PicoLCD HID device Rick L. Vinyard, Jr.
2010-02-26  8:15         ` Dmitry Torokhov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20100224170112.576403ee@neptune.home \
    --to=bonbons@linux-vserver.org \
    --cc=jkosina@suse.cz \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=npavel@ituner.com \
    --cc=rvinyard@cs.nmsu.edu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).