From: Mauro Carvalho Chehab <mchehab@redhat.com>
To: linux-input@vger.kernel.org,
Linux Media Mailing List <linux-media@vger.kernel.org>
Subject: [PATCH 2/8] V4L/DVB: ir: Make sure that the spinlocks are properly initialized
Date: Thu, 8 Apr 2010 16:37:17 -0300 [thread overview]
Message-ID: <20100408163717.678b350d@pedra> (raw)
In-Reply-To: <cover.1270754989.git.mchehab@redhat.com>
Some spinlocks are not properly initialized on ir core:
[ 471.714132] BUG: spinlock bad magic on CPU#0, modprobe/1899
[ 471.719838] lock: f92a08ac, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0
[ 471.727301] Pid: 1899, comm: modprobe Not tainted 2.6.33 #36
[ 471.733062] Call Trace:
[ 471.735537] [<c1498793>] ? printk+0x1d/0x22
[ 471.739866] [<c12694e3>] spin_bug+0xa3/0xf0
[ 471.744224] [<c126962d>] do_raw_spin_lock+0x7d/0x160
[ 471.749364] [<f92a01ff>] ? ir_rc5_register+0x6f/0xf0 [ir_rc5_decoder]
So, use static initialization for the static spinlocks, instead of the
dynamic ones (currently used), as proposed by David Härdeman on one
of his RFC patches.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
diff --git a/drivers/media/IR/ir-nec-decoder.c b/drivers/media/IR/ir-nec-decoder.c
index 9d1ada9..48a86cc 100644
--- a/drivers/media/IR/ir-nec-decoder.c
+++ b/drivers/media/IR/ir-nec-decoder.c
@@ -25,7 +25,7 @@
/* Used to register nec_decoder clients */
static LIST_HEAD(decoder_list);
-static spinlock_t decoder_lock;
+DEFINE_SPINLOCK(decoder_lock);
enum nec_state {
STATE_INACTIVE,
diff --git a/drivers/media/IR/ir-raw-event.c b/drivers/media/IR/ir-raw-event.c
index 57990a3..4ba7074 100644
--- a/drivers/media/IR/ir-raw-event.c
+++ b/drivers/media/IR/ir-raw-event.c
@@ -21,7 +21,7 @@
/* Used to handle IR raw handler extensions */
static LIST_HEAD(ir_raw_handler_list);
-static spinlock_t ir_raw_handler_lock;
+DEFINE_SPINLOCK(ir_raw_handler_lock);
/**
* RUN_DECODER() - runs an operation on all IR decoders
@@ -205,8 +205,6 @@ static void init_decoders(struct work_struct *work)
void ir_raw_init(void)
{
- spin_lock_init(&ir_raw_handler_lock);
-
#ifdef MODULE
INIT_WORK(&wq_load, init_decoders);
schedule_work(&wq_load);
diff --git a/drivers/media/IR/ir-rc5-decoder.c b/drivers/media/IR/ir-rc5-decoder.c
index a62277b..b8a33ae 100644
--- a/drivers/media/IR/ir-rc5-decoder.c
+++ b/drivers/media/IR/ir-rc5-decoder.c
@@ -29,7 +29,7 @@ static unsigned int ir_rc5_remote_gap = 888888;
/* Used to register rc5_decoder clients */
static LIST_HEAD(decoder_list);
-static spinlock_t decoder_lock;
+DEFINE_SPINLOCK(decoder_lock);
enum rc5_state {
STATE_INACTIVE,
diff --git a/drivers/media/IR/rc-map.c b/drivers/media/IR/rc-map.c
index 2f6201c..38b3489 100644
--- a/drivers/media/IR/rc-map.c
+++ b/drivers/media/IR/rc-map.c
@@ -17,8 +17,7 @@
/* Used to handle IR raw handler extensions */
static LIST_HEAD(rc_map_list);
-static spinlock_t rc_map_lock;
-
+DEFINE_SPINLOCK(rc_map_lock);
static struct rc_keymap *seek_rc_map(const char *name)
{
--
1.6.6.1
next prev parent reply other threads:[~2010-04-08 19:37 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <cover.1270754989.git.mchehab@redhat.com>
2010-04-08 19:37 ` [PATCH 8/8] V4L/DVB: ir-core: move subsystem internal calls to ir-core-priv.h Mauro Carvalho Chehab
2010-04-08 21:34 ` Mauro Carvalho Chehab
2010-04-08 19:37 ` [PATCH 7/8] V4L/DVB: Teach drivers/media/IR/ir-raw-event.c to use durations Mauro Carvalho Chehab
2010-04-08 19:37 ` [PATCH 3/8] V4L/DVB: rename sysfs remote controller devices from rcrcv to rc Mauro Carvalho Chehab
2010-04-08 19:37 ` [PATCH 1/8] V4L/DVB: em28xx: fix a regression caused by the rc-map changes Mauro Carvalho Chehab
2010-04-08 19:37 ` Mauro Carvalho Chehab [this message]
2010-04-08 19:37 ` [PATCH 6/8] V4L/DVB: ir-core: fix gcc warning noise Mauro Carvalho Chehab
2010-04-08 19:37 ` [PATCH 5/8] V4L/DVB: ir-core: properly present the supported and current protocols Mauro Carvalho Chehab
2010-04-08 19:37 ` [PATCH 4/8] V4L/DVB: ir-core: Distinguish sysfs attributes for in-hardware and raw decoders Mauro Carvalho Chehab
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100408163717.678b350d@pedra \
--to=mchehab@redhat.com \
--cc=linux-input@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).