From: Ben Dooks <ben-linux@fluff.org>
To: Maurus Cuelenaere <mcuelenaere@gmail.com>
Cc: linux-samsung-soc@vger.kernel.org, linux-input@vger.kernel.org,
arnaud.patard@rtp-net.org, ben-linux@fluff.org
Subject: Re: [PATCH] ARM: S3C64XX: Add s3c64xx support to touchscreen driver
Date: Fri, 7 May 2010 01:40:30 +0100 [thread overview]
Message-ID: <20100507004030.GX2589@trinity.fluff.org> (raw)
In-Reply-To: <4BE290E5.9050703@gmail.com>
On Thu, May 06, 2010 at 11:50:29AM +0200, Maurus Cuelenaere wrote:
> Add support for the s3c64xx touchscreen to the s3c2410_ts driver,
> ensuring it compiles and supports the extra features such as the
> interrupt generation.
>
> Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com>
Acked-by: Ben Dooks <ben-linux@fluff.org>
> ---
> drivers/input/touchscreen/Kconfig | 6 +++---
> drivers/input/touchscreen/s3c2410_ts.c | 26 ++++++++++++++++++++++----
> 2 files changed, 25 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
> index 8a8fa4d..be8e9ba 100644
> --- a/drivers/input/touchscreen/Kconfig
> +++ b/drivers/input/touchscreen/Kconfig
> @@ -158,11 +158,11 @@ config TOUCHSCREEN_FUJITSU
> module will be called fujitsu-ts.
>
> config TOUCHSCREEN_S3C2410
> - tristate "Samsung S3C2410 touchscreen input driver"
> - depends on ARCH_S3C2410
> + tristate "Samsung S3C touchscreen input driver"
> + depends on ARCH_S3C2410 || ARCH_S3C64XX
> select S3C24XX_ADC
> help
> - Say Y here if you have the s3c2410 touchscreen.
> + Say Y here if you have the s3c touchscreen.
>
> If unsure, say N.
>
> diff --git a/drivers/input/touchscreen/s3c2410_ts.c b/drivers/input/touchscreen/s3c2410_ts.c
> index 98a7d12..66d1c83 100644
> --- a/drivers/input/touchscreen/s3c2410_ts.c
> +++ b/drivers/input/touchscreen/s3c2410_ts.c
> @@ -87,6 +87,12 @@ struct s3c2410ts {
>
> static struct s3c2410ts ts;
>
> +enum s3c_cpu_type {
> + TYPE_S3C2410,
> + TYPE_S3C2440,
> + TYPE_S3C64XX,
> +};
> +
> /**
> * s3c2410_ts_connect - configure gpio for s3c2410 systems
> *
> @@ -96,10 +102,14 @@ static struct s3c2410ts ts;
> */
> static inline void s3c2410_ts_connect(void)
> {
> +#ifdef PLAT_S3C24XX
> + /* As s3c2410_gpio_cfgpin() isn't defined for non-s3c24xx builds,
> + guard these with an ifdef. */
> s3c2410_gpio_cfgpin(S3C2410_GPG(12), S3C2410_GPG12_XMON);
> s3c2410_gpio_cfgpin(S3C2410_GPG(13), S3C2410_GPG13_nXPON);
> s3c2410_gpio_cfgpin(S3C2410_GPG(14), S3C2410_GPG14_YMON);
> s3c2410_gpio_cfgpin(S3C2410_GPG(15), S3C2410_GPG15_nYPON);
> +#endif
> }
>
> /**
> @@ -170,6 +180,7 @@ static DEFINE_TIMER(touch_timer, touch_timer_fire, 0, 0);
> */
> static irqreturn_t stylus_irq(int irq, void *dev_id)
> {
> + struct platform_device *pdev = to_platform_device(ts.dev);
> unsigned long data0;
> unsigned long data1;
> bool down;
> @@ -188,6 +199,12 @@ static irqreturn_t stylus_irq(int irq, void *dev_id)
> else
> dev_info(ts.dev, "%s: count=%d\n", __func__, ts.count);
>
> +
> + if (platform_get_device_id(pdev)->driver_data == TYPE_S3C64XX) {
> + /* Clear pen down/up interrupt */
> + writel(0x0, ts.io + S3C64XX_ADCCLRINTPNDNUP);
> + }
> +
> return IRQ_HANDLED;
> }
>
> @@ -297,7 +314,7 @@ static int __devinit s3c2410ts_probe(struct platform_device *pdev)
> }
>
> /* Configure the touchscreen external FETs on the S3C2410 */
> - if (!platform_get_device_id(pdev)->driver_data)
> + if (platform_get_device_id(pdev)->driver_data == TYPE_S3C2410)
> s3c2410_ts_connect();
>
> ts.client = s3c_adc_register(pdev, s3c24xx_ts_select,
> @@ -420,15 +437,16 @@ static struct dev_pm_ops s3c_ts_pmops = {
> #endif
>
> static struct platform_device_id s3cts_driver_ids[] = {
> - { "s3c2410-ts", 0 },
> - { "s3c2440-ts", 1 },
> + { "s3c2410-ts", TYPE_S3C2410 },
> + { "s3c2440-ts", TYPE_S3C2440 },
> + { "s3c64xx-ts", TYPE_S3C64XX },
> { }
> };
> MODULE_DEVICE_TABLE(platform, s3cts_driver_ids);
>
> static struct platform_driver s3c_ts_driver = {
> .driver = {
> - .name = "s3c24xx-ts",
> + .name = "s3c-ts",
> .owner = THIS_MODULE,
> #ifdef CONFIG_PM
> .pm = &s3c_ts_pmops,
> --
> 1.7.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-input" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
--
Ben
Q: What's a light-year?
A: One-third less calories than a regular year.
next prev parent reply other threads:[~2010-05-07 0:40 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-05-06 9:50 [PATCH] ARM: S3C64XX: Add s3c64xx support to touchscreen driver Maurus Cuelenaere
2010-05-07 0:40 ` Ben Dooks [this message]
2010-06-28 18:30 ` Dmitry Torokhov
2010-06-28 21:11 ` Maurus Cuelenaere
2010-06-29 7:07 ` Dmitry Torokhov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100507004030.GX2589@trinity.fluff.org \
--to=ben-linux@fluff.org \
--cc=arnaud.patard@rtp-net.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=mcuelenaere@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).