From: Mark Brown <broonie@opensource.wolfsonmicro.com>
To: Manuel Lauss <manuel.lauss@googlemail.com>
Cc: linux-input@vger.kernel.org
Subject: Re: WM9712 GPIO
Date: Wed, 12 May 2010 13:30:26 +0100 [thread overview]
Message-ID: <20100512123026.GA8082@rakim.wolfsonmicro.main> (raw)
In-Reply-To: <AANLkTikXR3vlUg-XX33LCrAiVxk0nJWNe__7SU7g1DuF@mail.gmail.com>
On Wed, May 12, 2010 at 01:47:12PM +0200, Manuel Lauss wrote:
> I'm playing with the GPIO interface on a WM9712G, specifically GPIO1
> and 2 of the chip.
> However I'm unable to get the chip to toggle any of these pins.
> Setting a pin with
> wm97xx_set_gpio(wm, WM97XX_GPIO_1, WM97XX_GPIO_HIGH);
> reads back 0x0820 from GPIO status reg, sets bit 1,writes back 0x1044 (<<1),
> but a read following immediately after yields 0x0820 again, and the pin
> never changes.
> Am I missing something?
The WM9712 does not support this feature. It only supports setting the
GPIO status by use of AC'97 slot 12 for which there's currently no
standard glue on Linux. Setting slot 12 needs to be done in the AC'97
controller.
> Also I need this patch to get wm97xx_set_gpio() to actually set a bit in the
> gpio register:
Please just submit this patch, it looks good.
next prev parent reply other threads:[~2010-05-12 12:30 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-05-12 11:47 WM9712 GPIO Manuel Lauss
2010-05-12 12:30 ` Mark Brown [this message]
2010-05-12 12:50 ` Manuel Lauss
2010-05-12 12:52 ` Mark Brown
2010-05-12 12:54 ` Manuel Lauss
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100512123026.GA8082@rakim.wolfsonmicro.main \
--to=broonie@opensource.wolfsonmicro.com \
--cc=linux-input@vger.kernel.org \
--cc=manuel.lauss@googlemail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).