linux-input.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
To: Richard Nauber <richard.nauber@googlemail.com>
Cc: linux-input@vger.kernel.org, Jiri Kosina <jkosina@suse.cz>
Subject: Re: [PATCH v2] HID: Fix reporting of nonexistent HWheel for Elecom BM084 (bluetooth mouse).
Date: Mon, 28 Jun 2010 09:34:51 -0700	[thread overview]
Message-ID: <20100628163451.GB11670@core.coreip.homeip.net> (raw)
In-Reply-To: <4C288B57.7060600@googlemail.com>

Hi Richard,

HID changes shoudl go toJiri (CCed).

Thanks.

On Mon, Jun 28, 2010 at 01:45:27PM +0200, Richard Nauber wrote:
> Hi,
> my last patch was missing the blacklist entry in hid-core.c.
> Now I think it is complete. It would be nice if you could review 
> it and add it to the input-tree, in case it is ready...
> 
> Greetings,
> Richard
> 
> --snip--
> 
> HID: Fix reporting of nonexistent HWheel for Elecom BM084 (bluetooth mouse).
> 
> This patch removes the annoying feature of Elecoms BM084 to constantly scroll to the right.
> The device can be found at:
> http://www.dealextreme.com/details.dx/sku.15402
> 
> Signed-off-by:  Richard Nauber <Richard.Nauber@gmail.com>
> ---
>  drivers/hid/Kconfig      |    6 +++++
>  drivers/hid/Makefile     |    1 +
>  drivers/hid/hid-core.c   |    1 +
>  drivers/hid/hid-elecom.c |   57 ++++++++++++++++++++++++++++++++++++++++++++++
>  drivers/hid/hid-ids.h    |    3 ++
>  5 files changed, 68 insertions(+), 0 deletions(-)
>  create mode 100644 drivers/hid/hid-elecom.c
> 
> diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
> index 132278f..0eac193 100644
> --- a/drivers/hid/Kconfig
> +++ b/drivers/hid/Kconfig
> @@ -148,6 +148,12 @@ config HID_EGALAX
>  	---help---
>  	Support for the eGalax dual-touch panel.
> 
> +config HID_ELECOM
> +	tristate "ELECOM"
> +	depends on USB_HID
> +	---help---
> +	Support for the ELECOM BM084 (bluetooth mouse).
> +
>  config HID_EZKEY
>  	tristate "Ezkey" if EMBEDDED
>  	depends on USB_HID
> diff --git a/drivers/hid/Makefile b/drivers/hid/Makefile
> index 987fa06..2ec042f 100644
> --- a/drivers/hid/Makefile
> +++ b/drivers/hid/Makefile
> @@ -32,6 +32,7 @@ obj-$(CONFIG_HID_CHICONY)	+= hid-chicony.o
>  obj-$(CONFIG_HID_CYPRESS)	+= hid-cypress.o
>  obj-$(CONFIG_HID_DRAGONRISE)	+= hid-drff.o
>  obj-$(CONFIG_HID_EGALAX)	+= hid-egalax.o
> +obj-$(CONFIG_HID_ELECOM)	+= hid-elecom.o
>  obj-$(CONFIG_HID_EZKEY)		+= hid-ezkey.o
>  obj-$(CONFIG_HID_GYRATION)	+= hid-gyration.o
>  obj-$(CONFIG_HID_KENSINGTON)	+= hid-kensington.o
> diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
> index aa0f7dc..59ea24e 100644
> --- a/drivers/hid/hid-core.c
> +++ b/drivers/hid/hid-core.c
> @@ -1294,6 +1294,7 @@ static const struct hid_device_id hid_blacklist[] = {
>  	{ HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_MOUSE) },
>  	{ HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, 0x0006) },
>  	{ HID_USB_DEVICE(USB_VENDOR_ID_DWAV, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH) },
> +	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_ELECOM, USB_DEVICE_ID_ELECOM_BM084) },
>  	{ HID_USB_DEVICE(USB_VENDOR_ID_EZKEY, USB_DEVICE_ID_BTC_8193) },
>  	{ HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PSX_ADAPTOR) },
>  	{ HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PCS_ADAPTOR) },
> diff --git a/drivers/hid/hid-elecom.c b/drivers/hid/hid-elecom.c
> new file mode 100644
> index 0000000..7a40878
> --- /dev/null
> +++ b/drivers/hid/hid-elecom.c
> @@ -0,0 +1,57 @@
> +/*
> + *  HID driver for Elecom BM084 (bluetooth mouse).
> + *  Removes a non-existing horizontal wheel from
> + *  the HID descriptor.
> + *  (This module is based on "hid-ortek".)
> + *
> + *  Copyright (c) 2010 Richard Nauber <Richard.Nauber@gmail.com>
> + */
> +
> +/*
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the Free
> + * Software Foundation; either version 2 of the License, or (at your option)
> + * any later version.
> + */
> +
> +#include <linux/device.h>
> +#include <linux/hid.h>
> +#include <linux/module.h>
> +
> +#include "hid-ids.h"
> +
> +static void elecom_report_fixup(struct hid_device *hdev, __u8 *rdesc,
> +		unsigned int rsize)
> +{
> +	if (rsize >= 48 && rdesc[46] == 0x05 && rdesc[47] == 0x0c) {
> +		dev_info(&hdev->dev, "Fixing up Elecom BM084 "
> +				"report descriptor.\n");
> +		rdesc[47] = 0x00;
> +	}
> +}
> +
> +static const struct hid_device_id elecom_devices[] = {
> +	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_ELECOM, USB_DEVICE_ID_ELECOM_BM084)},
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(hid, elecom_devices);
> +
> +static struct hid_driver elecom_driver = {
> +	.name = "elecom",
> +	.id_table = elecom_devices,
> +	.report_fixup = elecom_report_fixup
> +};
> +
> +static int __init elecom_init(void)
> +{
> +	return hid_register_driver(&elecom_driver);
> +}
> +
> +static void __exit elecom_exit(void)
> +{
> +	hid_unregister_driver(&elecom_driver);
> +}
> +
> +module_init(elecom_init);
> +module_exit(elecom_exit);
> +MODULE_LICENSE("GPL");
> diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
> index 6af77ed..55cecb7 100644
> --- a/drivers/hid/hid-ids.h
> +++ b/drivers/hid/hid-ids.h
> @@ -186,6 +186,9 @@
>  #define USB_DEVICE_ID_EGALAX_TOUCHCONTROLLER	0x0001
>  #define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH	0x480d
> 
> +#define USB_VENDOR_ID_ELECOM		0x056e
> +#define USB_DEVICE_ID_ELECOM_BM084	0x0061
> +
>  #define USB_VENDOR_ID_ELO		0x04E7
>  #define USB_DEVICE_ID_ELO_TS2700	0x0020
> 
> -- 
> 1.6.4.2
> 

-- 
Dmitry

  reply	other threads:[~2010-06-28 16:34 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-06-28 11:45 [PATCH v2] HID: Fix reporting of nonexistent HWheel for Elecom BM084 (bluetooth mouse) Richard Nauber
2010-06-28 16:34 ` Dmitry Torokhov [this message]
2010-06-28 16:39   ` Jiri Kosina
2010-06-28 16:54     ` Richard Nauber
2010-06-28 17:01       ` Jiri Kosina
2010-06-28 17:11         ` Richard Nauber

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20100628163451.GB11670@core.coreip.homeip.net \
    --to=dmitry.torokhov@gmail.com \
    --cc=jkosina@suse.cz \
    --cc=linux-input@vger.kernel.org \
    --cc=richard.nauber@googlemail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).