From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
To: platform-driver-x86@vger.kernel.org
Cc: linux-input@vger.kernel.org, linux-kernel@vger.kernel.org,
mjg@redhat.com
Subject: [PATCH 5/5] toshiba-acpi - switch to using sparse keymap
Date: Wed, 04 Aug 2010 22:30:19 -0700 [thread overview]
Message-ID: <20100805053018.604.78180.stgit@localhost.localdomain> (raw)
In-Reply-To: <20100805052645.604.28606.stgit@localhost.localdomain>
Instead of implementing its own version of keymap hanlding switch over
to using sparse keymap library.
Also, install notify handler only after we allocated input device,
otherwise we may risk getting event too early and crash. Similarly,
notify handler should be removed before we unregister input device.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
drivers/platform/x86/Kconfig | 2
drivers/platform/x86/toshiba_acpi.c | 191 ++++++++++++-----------------------
2 files changed, 65 insertions(+), 128 deletions(-)
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index 15d5374..b40c15c 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -485,7 +485,7 @@ config ACPI_TOSHIBA
depends on ACPI
depends on INPUT
depends on RFKILL || RFKILL = n
- select INPUT_POLLDEV
+ select INPUT_SPARSEKMAP
select BACKLIGHT_CLASS_DEVICE
---help---
This driver adds support for access to certain system settings
diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c
index 7d67a45..06f304f 100644
--- a/drivers/platform/x86/toshiba_acpi.c
+++ b/drivers/platform/x86/toshiba_acpi.c
@@ -48,6 +48,7 @@
#include <linux/platform_device.h>
#include <linux/rfkill.h>
#include <linux/input.h>
+#include <linux/input/sparse-keymap.h>
#include <linux/leds.h>
#include <linux/slab.h>
@@ -121,36 +122,28 @@ static const struct acpi_device_id toshiba_device_ids[] = {
};
MODULE_DEVICE_TABLE(acpi, toshiba_device_ids);
-struct key_entry {
- char type;
- u16 code;
- u16 keycode;
-};
-
-enum {KE_KEY, KE_END};
-
-static struct key_entry toshiba_acpi_keymap[] = {
- {KE_KEY, 0x101, KEY_MUTE},
- {KE_KEY, 0x102, KEY_ZOOMOUT},
- {KE_KEY, 0x103, KEY_ZOOMIN},
- {KE_KEY, 0x13b, KEY_COFFEE},
- {KE_KEY, 0x13c, KEY_BATTERY},
- {KE_KEY, 0x13d, KEY_SLEEP},
- {KE_KEY, 0x13e, KEY_SUSPEND},
- {KE_KEY, 0x13f, KEY_SWITCHVIDEOMODE},
- {KE_KEY, 0x140, KEY_BRIGHTNESSDOWN},
- {KE_KEY, 0x141, KEY_BRIGHTNESSUP},
- {KE_KEY, 0x142, KEY_WLAN},
- {KE_KEY, 0x143, KEY_PROG1},
- {KE_KEY, 0xb05, KEY_PROG2},
- {KE_KEY, 0xb06, KEY_WWW},
- {KE_KEY, 0xb07, KEY_MAIL},
- {KE_KEY, 0xb30, KEY_STOP},
- {KE_KEY, 0xb31, KEY_PREVIOUSSONG},
- {KE_KEY, 0xb32, KEY_NEXTSONG},
- {KE_KEY, 0xb33, KEY_PLAYPAUSE},
- {KE_KEY, 0xb5a, KEY_MEDIA},
- {KE_END, 0, 0},
+static const struct key_entry toshiba_acpi_keymap[] __initconst = {
+ { KE_KEY, 0x101, { KEY_MUTE } },
+ { KE_KEY, 0x102, { KEY_ZOOMOUT } },
+ { KE_KEY, 0x103, { KEY_ZOOMIN } },
+ { KE_KEY, 0x13b, { KEY_COFFEE } },
+ { KE_KEY, 0x13c, { KEY_BATTERY } },
+ { KE_KEY, 0x13d, { KEY_SLEEP } },
+ { KE_KEY, 0x13e, { KEY_SUSPEND } },
+ { KE_KEY, 0x13f, { KEY_SWITCHVIDEOMODE } },
+ { KE_KEY, 0x140, { KEY_BRIGHTNESSDOWN } },
+ { KE_KEY, 0x141, { KEY_BRIGHTNESSUP } },
+ { KE_KEY, 0x142, { KEY_WLAN } },
+ { KE_KEY, 0x143, { KEY_PROG1 } },
+ { KE_KEY, 0xb05, { KEY_PROG2 } },
+ { KE_KEY, 0xb06, { KEY_WWW } },
+ { KE_KEY, 0xb07, { KEY_MAIL } },
+ { KE_KEY, 0xb30, { KEY_STOP } },
+ { KE_KEY, 0xb31, { KEY_PREVIOUSSONG } },
+ { KE_KEY, 0xb32, { KEY_NEXTSONG } },
+ { KE_KEY, 0xb33, { KEY_PLAYPAUSE } },
+ { KE_KEY, 0xb5a, { KEY_MEDIA } },
+ { KE_END, 0 },
};
/* utility
@@ -852,64 +845,9 @@ static struct backlight_ops toshiba_backlight_data = {
.update_status = set_lcd_status,
};
-static struct key_entry *toshiba_acpi_get_entry_by_scancode(unsigned int code)
-{
- struct key_entry *key;
-
- for (key = toshiba_acpi_keymap; key->type != KE_END; key++)
- if (code == key->code)
- return key;
-
- return NULL;
-}
-
-static struct key_entry *toshiba_acpi_get_entry_by_keycode(unsigned int code)
-{
- struct key_entry *key;
-
- for (key = toshiba_acpi_keymap; key->type != KE_END; key++)
- if (code == key->keycode && key->type == KE_KEY)
- return key;
-
- return NULL;
-}
-
-static int toshiba_acpi_getkeycode(struct input_dev *dev,
- unsigned int scancode, unsigned int *keycode)
-{
- struct key_entry *key = toshiba_acpi_get_entry_by_scancode(scancode);
-
- if (key && key->type == KE_KEY) {
- *keycode = key->keycode;
- return 0;
- }
-
- return -EINVAL;
-}
-
-static int toshiba_acpi_setkeycode(struct input_dev *dev,
- unsigned int scancode, unsigned int keycode)
-{
- struct key_entry *key;
- unsigned int old_keycode;
-
- key = toshiba_acpi_get_entry_by_scancode(scancode);
- if (key && key->type == KE_KEY) {
- old_keycode = key->keycode;
- key->keycode = keycode;
- set_bit(keycode, dev->keybit);
- if (!toshiba_acpi_get_entry_by_keycode(old_keycode))
- clear_bit(old_keycode, dev->keybit);
- return 0;
- }
-
- return -EINVAL;
-}
-
static void toshiba_acpi_notify(acpi_handle handle, u32 event, void *context)
{
u32 hci_result, value;
- struct key_entry *key;
if (event != 0x80)
return;
@@ -922,19 +860,11 @@ static void toshiba_acpi_notify(acpi_handle handle, u32 event, void *context)
if (value & 0x80)
continue;
- key = toshiba_acpi_get_entry_by_scancode
- (value);
- if (!key) {
+ if (!sparse_keymap_report_event(toshiba_acpi.hotkey_dev,
+ value, 1, true)) {
printk(MY_INFO "Unknown key %x\n",
value);
- continue;
}
- input_report_key(toshiba_acpi.hotkey_dev,
- key->keycode, 1);
- input_sync(toshiba_acpi.hotkey_dev);
- input_report_key(toshiba_acpi.hotkey_dev,
- key->keycode, 0);
- input_sync(toshiba_acpi.hotkey_dev);
} else if (hci_result == HCI_NOT_SUPPORTED) {
/* This is a workaround for an unresolved issue on
* some machines where system events sporadically
@@ -945,34 +875,17 @@ static void toshiba_acpi_notify(acpi_handle handle, u32 event, void *context)
} while (hci_result != HCI_EMPTY);
}
-static int toshiba_acpi_setup_keyboard(char *device)
+static int __init toshiba_acpi_setup_keyboard(char *device)
{
acpi_status status;
- acpi_handle handle;
- int result;
- const struct key_entry *key;
+ int error;
- status = acpi_get_handle(NULL, device, &handle);
+ status = acpi_get_handle(NULL, device, &toshiba_acpi.handle);
if (ACPI_FAILURE(status)) {
printk(MY_INFO "Unable to get notification device\n");
return -ENODEV;
}
- toshiba_acpi.handle = handle;
-
- status = acpi_evaluate_object(handle, "ENAB", NULL, NULL);
- if (ACPI_FAILURE(status)) {
- printk(MY_INFO "Unable to enable hotkeys\n");
- return -ENODEV;
- }
-
- status = acpi_install_notify_handler(handle, ACPI_DEVICE_NOTIFY,
- toshiba_acpi_notify, NULL);
- if (ACPI_FAILURE(status)) {
- printk(MY_INFO "Unable to install hotkey notification\n");
- return -ENODEV;
- }
-
toshiba_acpi.hotkey_dev = input_allocate_device();
if (!toshiba_acpi.hotkey_dev) {
printk(MY_INFO "Unable to register input device\n");
@@ -982,27 +895,54 @@ static int toshiba_acpi_setup_keyboard(char *device)
toshiba_acpi.hotkey_dev->name = "Toshiba input device";
toshiba_acpi.hotkey_dev->phys = device;
toshiba_acpi.hotkey_dev->id.bustype = BUS_HOST;
- toshiba_acpi.hotkey_dev->getkeycode = toshiba_acpi_getkeycode;
- toshiba_acpi.hotkey_dev->setkeycode = toshiba_acpi_setkeycode;
- for (key = toshiba_acpi_keymap; key->type != KE_END; key++) {
- set_bit(EV_KEY, toshiba_acpi.hotkey_dev->evbit);
- set_bit(key->keycode, toshiba_acpi.hotkey_dev->keybit);
+ error = sparse_keymap_setup(toshiba_acpi.hotkey_dev,
+ toshiba_acpi_keymap, NULL);
+ if (error)
+ goto err_free_dev;
+
+ status = acpi_install_notify_handler(toshiba_acpi.handle,
+ ACPI_DEVICE_NOTIFY, toshiba_acpi_notify, NULL);
+ if (ACPI_FAILURE(status)) {
+ printk(MY_INFO "Unable to install hotkey notification\n");
+ error = -ENODEV;
+ goto err_free_keymap;
+ }
+
+ status = acpi_evaluate_object(toshiba_acpi.handle, "ENAB", NULL, NULL);
+ if (ACPI_FAILURE(status)) {
+ printk(MY_INFO "Unable to enable hotkeys\n");
+ error = -ENODEV;
+ goto err_remove_notify;
}
- result = input_register_device(toshiba_acpi.hotkey_dev);
- if (result) {
+ error = input_register_device(toshiba_acpi.hotkey_dev);
+ if (error) {
printk(MY_INFO "Unable to register input device\n");
- return result;
+ goto err_remove_notify;
}
return 0;
+
+ err_remove_notify:
+ acpi_remove_notify_handler(toshiba_acpi.handle,
+ ACPI_DEVICE_NOTIFY, toshiba_acpi_notify);
+ err_free_keymap:
+ sparse_keymap_free(toshiba_acpi.hotkey_dev);
+ err_free_dev:
+ input_free_device(toshiba_acpi.hotkey_dev);
+ toshiba_acpi.hotkey_dev = NULL;
+ return error;
}
static void toshiba_acpi_exit(void)
{
- if (toshiba_acpi.hotkey_dev)
+ if (toshiba_acpi.hotkey_dev) {
+ acpi_remove_notify_handler(toshiba_acpi.handle,
+ ACPI_DEVICE_NOTIFY, toshiba_acpi_notify);
+ sparse_keymap_free(toshiba_acpi.hotkey_dev);
input_unregister_device(toshiba_acpi.hotkey_dev);
+ }
if (toshiba_acpi.bt_rfk) {
rfkill_unregister(toshiba_acpi.bt_rfk);
@@ -1017,9 +957,6 @@ static void toshiba_acpi_exit(void)
if (toshiba_proc_dir)
remove_proc_entry(PROC_TOSHIBA, acpi_root_dir);
- acpi_remove_notify_handler(toshiba_acpi.handle, ACPI_DEVICE_NOTIFY,
- toshiba_acpi_notify);
-
if (toshiba_acpi.illumination_installed)
led_classdev_unregister(&toshiba_led);
next prev parent reply other threads:[~2010-08-05 5:30 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-08-05 5:29 [PATCH 0/5] Convert x86 platform drivers to use sparse keymap library Dmitry Torokhov
2010-08-05 5:29 ` [PATCH 1/5] topstar-laptop - switch to using " Dmitry Torokhov
2010-08-05 5:30 ` [PATCH 2/5] panasonic-laptop " Dmitry Torokhov
2010-08-05 5:30 ` [PATCH 3/5] Input: dell-wmi " Dmitry Torokhov
2010-08-05 5:30 ` [PATCH 4/5] Input: hp-wmi " Dmitry Torokhov
2010-08-05 5:30 ` Dmitry Torokhov [this message]
2010-08-16 15:57 ` [PATCH 0/5] Convert x86 platform drivers to use " Matthew Garrett
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100805053018.604.78180.stgit@localhost.localdomain \
--to=dmitry.torokhov@gmail.com \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mjg@redhat.com \
--cc=platform-driver-x86@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).