linux-input.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Daniel Mack <daniel@caiaq.de>
To: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: linux-kernel@vger.kernel.org, linux-input@vger.kernel.org
Subject: Re: [PATCH 4/4] input: dynamically allocate ABS information
Date: Wed, 11 Aug 2010 09:02:38 +0200	[thread overview]
Message-ID: <20100811070238.GF10432@buzzloop.caiaq.de> (raw)
In-Reply-To: <20100721083150.GB21558@core.coreip.homeip.net>

Hi Dmitry,

On Wed, Jul 21, 2010 at 01:31:50AM -0700, Dmitry Torokhov wrote:
> Input: switch to input_abs_*() access functions
> 
> From: Daniel Mack <daniel@caiaq.de>
> 
> Change all call sites in drivers/input to not access the ABS axis
> information directly anymore. Make them use the access helpers instead.
> 
> Also use input_set_abs_params() when possible.
> Did some code refactoring as I was on it.
> 
> Signed-off-by: Daniel Mack <daniel@caiaq.de>
> Cc: Dmitry Torokhov <dtor@mail.ru>
> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Hmm, there are three locations where some mysterious 'XX' characters
were introduced.

> diff --git a/drivers/input/joystick/amijoy.c b/drivers/input/joystick/amijoy.c
> index 05022f0..e90694f 100644
> --- a/drivers/input/joystick/amijoy.c
> +++ b/drivers/input/joystick/amijoy.c
> @@ -139,8 +139,8 @@ static int __init amijoy_init(void)
>  		amijoy_dev[i]->keybit[BIT_WORD(BTN_LEFT)] = BIT_MASK(BTN_LEFT) |
>  			BIT_MASK(BTN_MIDDLE) | BIT_MASK(BTN_RIGHT);
>  		for (j = 0; j < 2; j++) {
> -			amijoy_dev[i]->absmin[ABS_X + j] = -1;
> -			amijoy_dev[i]->absmax[ABS_X + j] = 1;
> +			XXinput_set_abs_params(amijoy_dev[i], ABS_X + j,
                        ^^

[..]

> diff --git a/drivers/input/keyboard/hil_kbd.c b/drivers/input/keyboard/hil_kbd.c
> index c83f4b2..ddd5afd 100644
> --- a/drivers/input/keyboard/hil_kbd.c
> +++ b/drivers/input/keyboard/hil_kbd.c
> @@ -232,15 +232,16 @@ static void hil_dev_handle_ptr_events(struct hil_dev *ptr)
>  		if (absdev) {
>  			val = lo + (hi << 8);
>  #ifdef TABLET_AUTOADJUST
> -			if (val < dev->absmin[ABS_X + i])
> -				dev->absmin[ABS_X + i] = val;
> -			if (val > dev->absmax[ABS_X + i])
> -				dev->absmax[ABS_X + i] = val;
> +			if (val < input_abs_min(dev, ABS_X + i))
> +				input_abs_set_min(dev, ABS_X + i, val);
> +			if (val > input_abs_max(dev, ABS_X + i))
> +				XXinput_abs_set_max(dev, ABS_X + i, val);
                                ^^

>  #endif
> -			if (i%3) val = dev->absmax[ABS_X + i] - val;
> +			if (i % 3)
> +				val = input_abs_max(dev, ABS_X + i) - val;
>  			input_report_abs(dev, ABS_X + i, val);
>  		} else {
> -			val = (int) (((int8_t)lo) | ((int8_t)hi << 8));
> +			val = (int) (((int8_t) lo) | ((int8_t) hi << 8));
>  			if (i % 3)
>  				val *= -1;
>  			input_report_rel(dev, REL_X + i, val);
> @@ -387,9 +388,11 @@ static void hil_dev_pointer_setup(struct hil_dev *ptr)
>  
>  #ifdef TABLET_AUTOADJUST
>  		for (i = 0; i < ABS_MAX; i++) {
> -			int diff = input_dev->absmax[ABS_X + i] / 10;
> -			input_dev->absmin[ABS_X + i] += diff;
> -			input_dev->absmax[ABS_X + i] -= diff;
> +			int diff = input_abs_max(input_dev, ABS_X + i) / 10;
> +			input_abs_set_min(input_dev, ABS_X + i,
> +				input_abs_min(input_dev, ABS_X + i) + diff)
> +			XXinput_abs_set_max(input_dev, ABS_X + i,
                        ^^

I have no clue how they made it there, but they don't look right, unless
I miss some essential information.

Below is a patch to fix it up.

Thanks,
Daniel

>From 939d842964c8fd764a84702672be927a79d73e8f Mon Sep 17 00:00:00 2001
From: Daniel Mack <daniel@caiaq.de>
Date: Wed, 11 Aug 2010 08:59:53 +0200
Subject: [PATCH] drivers/input: fix faulty XXinput_* calls

They've been introduced by 987a6c02 ("Input: switch to input_abs_*()
access functions") and they appear to be some kind of debug left-over.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/joystick/amijoy.c  |    2 +-
 drivers/input/keyboard/hil_kbd.c |    4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/input/joystick/amijoy.c b/drivers/input/joystick/amijoy.c
index e90694f..0bc8620 100644
--- a/drivers/input/joystick/amijoy.c
+++ b/drivers/input/joystick/amijoy.c
@@ -139,7 +139,7 @@ static int __init amijoy_init(void)
 		amijoy_dev[i]->keybit[BIT_WORD(BTN_LEFT)] = BIT_MASK(BTN_LEFT) |
 			BIT_MASK(BTN_MIDDLE) | BIT_MASK(BTN_RIGHT);
 		for (j = 0; j < 2; j++) {
-			XXinput_set_abs_params(amijoy_dev[i], ABS_X + j,
+			input_set_abs_params(amijoy_dev[i], ABS_X + j,
 					     -1, 1, 0, 0);
 		}
 
diff --git a/drivers/input/keyboard/hil_kbd.c b/drivers/input/keyboard/hil_kbd.c
index ddd5afd..dcc86b9 100644
--- a/drivers/input/keyboard/hil_kbd.c
+++ b/drivers/input/keyboard/hil_kbd.c
@@ -235,7 +235,7 @@ static void hil_dev_handle_ptr_events(struct hil_dev *ptr)
 			if (val < input_abs_min(dev, ABS_X + i))
 				input_abs_set_min(dev, ABS_X + i, val);
 			if (val > input_abs_max(dev, ABS_X + i))
-				XXinput_abs_set_max(dev, ABS_X + i, val);
+				input_abs_set_max(dev, ABS_X + i, val);
 #endif
 			if (i % 3)
 				val = input_abs_max(dev, ABS_X + i) - val;
@@ -391,7 +391,7 @@ static void hil_dev_pointer_setup(struct hil_dev *ptr)
 			int diff = input_abs_max(input_dev, ABS_X + i) / 10;
 			input_abs_set_min(input_dev, ABS_X + i,
 				input_abs_min(input_dev, ABS_X + i) + diff)
-			XXinput_abs_set_max(input_dev, ABS_X + i,
+			input_abs_set_max(input_dev, ABS_X + i,
 				input_abs_max(input_dev, ABS_X + i) - diff)
 		}
 #endif
-- 
1.7.0.4


  parent reply	other threads:[~2010-08-11  7:02 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-05-19 17:22 [RFC] linux-input: dynamically allocate ABS axis information Daniel Mack
2010-05-19 17:22 ` [PATCH 1/4] input: use ABS_CNT rather than (ABS_MAX + 1) Daniel Mack
2010-05-19 17:22 ` [PATCH 2/4] input: add static inline helpers for ABS properties Daniel Mack
2010-05-19 17:22 ` [PATCH 3/4] input: switch to input_abs_*() access functions Daniel Mack
2010-07-14  8:09   ` Dmitry Torokhov
2010-05-19 17:22 ` [PATCH 4/4] input: dynamically allocate ABS information Daniel Mack
2010-05-24 16:08   ` Daniel Mack
2010-05-24 16:15     ` Dmitry Torokhov
2010-06-16  8:39       ` Daniel Mack
2010-07-21  8:30         ` Dmitry Torokhov
2010-07-21  8:31           ` Dmitry Torokhov
2010-07-21  8:32             ` Dmitry Torokhov
2010-07-21  9:22               ` ext-phil.2.carmody
2010-07-21 10:42                 ` Artem Bityutskiy
2010-08-11  7:02             ` Daniel Mack [this message]
2010-08-13  3:35               ` Dmitry Torokhov
2010-08-07 15:23           ` Daniel Mack
2010-08-11  3:29             ` Dmitry Torokhov
2010-07-14  8:18   ` Dmitry Torokhov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20100811070238.GF10432@buzzloop.caiaq.de \
    --to=daniel@caiaq.de \
    --cc=dmitry.torokhov@gmail.com \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).